The company also obtained the exclusive agency, promotion and consultation rights of NYROSTEN N113 FS grease, a preservative for rear wire rope produced by Nyrosten. In 2007, the company reached a technical cooperation with Germany Gaole Company, and developed a mine pneumatic pump with independent intellectual property rights, which is at the leading level in China. Reached a product agency agreement with German WDI company and became the general agent of German WDI wire rope in China.
According to the market demand, relying on German advanced technology and cooperating with famous domestic universities, the company independently developed BECOT D660 pulley pad, flame-retardant antistatic plastic idler and other products with independent intellectual property rights.
In 2000, the company obtained the exclusive agency of German BECORIT company in China. With its excellent performance and high friction coefficient, K25 liner has become the first choice for domestic friction hoists, which provides a strong guarantee for the performance improvement and safe operation of domestic large mine hoists.
In May, 2004, the "Seminar on Friction Plate Technology of Hoist" organized by China Coal Industry Association was held in Luoyang. This meeting will play a positive role in understanding the application status of domestic friction plates, speeding up the research and development of domestic friction plates and improving the performance level of mine hoists in China.
Due to the good sales performance of K25 high-performance friction lining and the company's professional authority in the mining field, NYROSTEN, a famous German oil manufacturer, took the initiative to contact the company in April 2005 and granted NYROSTEN N 1 13 FS the exclusive agency in China.
In June 2005, the company obtained "ISO900 1:2000: 2000 International Quality Management System Certification", which made the company more scientific and systematic in product quality control and enterprise management.
In order to implement the State Council's opinion on the healthy development of coal industry, improve the requirements of coal mine equipment modernization by adopting high-tech and advanced practical technology, and improve the equipment level of large hoists in China through technology introduction, the Technical Committee of Coal Industry and China Coal Machinery Industry Association held a meeting in Luoyang City, Henan Province from June 5438+065438+1 October1to June 5438+03, 2005. At the meeting, the company made an academic report on "Friction gasket, grease, steel wire rope and their interaction", and deeply discussed and analyzed the performance parameters, friction coefficient, hardness, compressive strength and failure form of friction gasket. Relevant units introduced the application of Beckley K 25 gasket in detail. The meeting had a heated discussion, exchange and exploration with a rigorous style of study. The meeting was a great success.
In 2005, a counterfeit K25 incident occurred in the market. For this incident, the company made a positive response and investigation, and filed a lawsuit with the court. As our company is the exclusive agent of BECORIT in China, only the company in China has the right to consult on the production, sales and technical services of K25 gasket. In order to ensure users' interests and right to know, the company issued corresponding certificates for the sold K25 gaskets, and asked users to check the manufacturer's certificates when ordering K25 gaskets to avoid unnecessary losses.
In 2005, a rope slip accident occurred in Zhangbei Mine and Zhangji Mine of Huainan Mining Group. During this period, the company has been actively cooperating with the mine to analyze the problems, and sent the K25 lining plate of the main shaft to Luoyang Mining Machinery Engineering Design and Research Institute, the authoritative department of the state, for physical inspection. At the same time, the liner and grease were also sent to BECORIT and NYROSTEN in Germany for testing. All test reports prove that the friction coefficient and wear resistance of K25 gasket completely meet the coal industry standards of People's Republic of China (PRC) and China MT/T284-9 1. Slipping rope is caused by the impurity of hemp core grease in steel wire rope, and British BRIDON Company also issued written materials on this matter to Huainan Mining Group on June 5438+065438+ 10, and expressed its willingness to bear the corresponding liability for compensation.
From June 5438, 2006 to February 2006, the company reached a long-term technical cooperation agreement with China University of Mining and Technology, and developed a friction coefficient test bench, which made the development of friction plates in China more mature and perfect, and also provided technical support for mine safety production.
From March to April, 2006, the company used NYROSTEN N 1 13 FS for post-corrosion protection of its steel wire rope in Huainan. In June, the company went to Huainan again to inspect its steel wire rope, and found that the surface condition of steel wire rope sprayed with NYROSTEN113 FS grease was obviously better than that of steel wire rope without grease. Deeply aware of this, NYROSTEN N 1 13 FS grease is widely used as the post-preservative for its steel wire rope.
On may 23, 2006, the main leaders of the company reviewed the long-term cooperation statement with the german company BECORIT.
In May, 2006, the company reached an intention of cooperation with the German Gaole Company on mine pneumatic pumps and auxiliary transportation equipment, and reached an understanding with Gaole Company to establish a joint venture company.
On July 28th, 2006, the company won the "membership certificate of China Coal Industry Association".
In 2005-2006, the company's main leaders went to Germany for technical negotiation and inspection of new products, and at the same time reached a cooperation intention with the German BECORIT company in the field of new products.
▲ In 2006, the company successfully developed a new product G30 gasket, with a test friction coefficient of 0.28 and a service friction coefficient of 0.25. It is an updated product of domestic liner, which can well meet the design requirements of domestic hoist.
▲ In September 2006, the company, together with the Technical Committee of Coal Industry, China Coal Machinery Industry Association and China University of Mining and Technology, successfully held an international forum on mine hoisting and transportation technology, in which four well-known German companies and more than 70 representatives from all over the country participated. This conference is the third international conference successfully held by the company, which has been well received by experts in the industry and users of the company's products.
In June 2006, the company participated in China Huaibei Mining Equipment Exhibition.
From June 5438 to February 2006, the company successfully reached a cooperation intention with Mr. LITSCHKE of Germany, and prepared to increase the capital of the enterprise and transform it into a joint venture.
At the end of 2006, the company reached a cooperation intention with German Gaole Machinery Equipment Co., Ltd. and was established in Luoyang, China.
Joint venture, mainly engaged in mine auxiliary transportation equipment.
In February, 2007, the company reached a cooperation intention with German WDI Company, and became the exclusive agent of its wire rope in China.
Consultation.