The difference between single tube and double tube in bottle disinfection cabinet The baby disinfection pot adopts the patented technology of hot vortex drying, which eliminates the side effects of drying bottles in general disinfection pot. Plastic products can't stay at high temperature for too long, so they should be put in after the water is boiled, and the bottle can be filled with boiling water before being put in, so as to prevent the bottle from floating on the water and failing to achieve the purpose of comprehensive disinfection. Bottles should be disinfected before each use, even if they are not used after disinfection, they should be disinfected again one day later. Plastic bottles, some of which are of poor quality, will produce chemicals after high temperature, so be sure to disinfect them before giving them to your baby.
Bottle sterilizer is an instrument specially used to sterilize bottles, also called bottle sterilizer or bottle sterilizer. Its disinfection method has developed from traditional boiling disinfection to steam disinfection and microwave disinfection. GB 14934-94 Tableware Disinfection Standard contains two disinfection methods: thermal disinfection and detergent disinfection. The disinfection effect and safety of these two disinfection methods have been strictly verified and widely used.
Among them, 100℃ steam sterilization or 100℃ boiling 10 min is suitable for bottle sterilizer. Such as a water boiling bottle sterilizer. The principle of traditional disinfection method is to boil water to 100℃ and disinfect baby bottles at high temperature. This disinfection method is suitable for disinfection of utensils with high temperature resistance above 120℃. Equipped with a bottle basket, it can hold about 6 bottles.
How to choose the disinfection type of bottle disinfection cabinet can be divided into high temperature disinfection and low temperature disinfection. Infrared disinfection and ultraviolet ozone plus high temperature disinfection belong to high temperature or multiple disinfection methods, and the disinfection temperature is generally above 100℃. This disinfection cabinet is only suitable for tableware made of ceramics, stainless steel and so on. Ozone and ultraviolet disinfection belong to low-temperature disinfection, the disinfection temperature is generally below 60℃, and plastic and glass tableware can be put in for disinfection.
To choose a disinfection cabinet with moderate power as the bottle disinfection, the power should not be too large, and about 600W is more suitable for bottle disinfection.
When purchasing a bottle sterilizer, consumers should ask the seller for the product quality inspection report issued by the national quality supervision and inspection department. At the same time, they should also pay attention to whether the products have health licenses issued by the health and epidemic prevention departments and inspection reports on sterilization effects. Generally speaking, the sterilization rate of bottle sterilizer for Escherichia coli and Staphylococcus aureus should be above 99.9%, and the sterilization rate for other bacteria should be above 90%.
The power switch button of the disinfection cabinet should be flexible and reliable, the power supply should respond quickly, and the indicator light should turn on and off normally. The power cord is firmly connected without looseness, the insulation layer is not damaged, and the connector is properly plugged and unplugged. At the same time pay attention to whether the grounding wire can be connected to the grounding terminal. Let's see if the movable lock switch is installed. Because the disinfection cabinet is disinfected with ozone, if the movable lock switch is not installed, when the disinfection cabinet can be opened without disinfection, high concentration of ozone will be leaked, which will affect the health of users.