(2) Reasons for applying for promotion:
A mainly introduces his own strength and performance.
B can also briefly explain how to implement the work objectives and performance objectives of the working machine if he is promoted successfully;
(3) once again show your love for your job and your expectation for promotion, and ask the higher authorities to consider your application.
Question 2: How to fill in the opinions of grass-roots units for the promotion of intermediate engineers? The content of the opinions of the grass-roots units is not filled in by themselves, but evaluated by the units according to your performance, and the opinions of agreeing with this comrade's promotion are written.
Question 3: How to promote an engineer to graduate for one year? I graduated from college for two years and worked as an assistant engineer. You don't need to evaluate it, just declare it directly.
After five years as an assistant engineer, you can evaluate engineers. First of all, you must pass the professional title English and computer exams. Next, you need a professional review committee to review them, fill in the application form, write a work summary, and write a professional paper above 1. Senior engineers can evaluate intermediate titles after working for five years, and the procedures are similar to those of intermediate titles. But at least a few papers should be published. Details are as follows:
I. Normal reporting conditions
1. Assistant title:
(1) bachelor degree, engaged in professional and technical work for more than one year.
(2) graduated from a college and engaged in professional and technical work for more than two years.
(3) graduated from technical secondary school and engaged in professional and technical work for more than three years.
(4) graduated from high school and engaged in professional and technical work for more than seven years.
(5) People with junior high school education or below have been engaged in professional and technical work for more than ten years, and at the same time should have rank-level positions.
2. Middle title:
(1) graduated from university, engaged in professional and technical work for more than five years, and worked as an assistant for more than four years.
(2) graduated from college, engaged in professional and technical work for more than six years and served as a teaching assistant for more than four years.
(3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as a teaching assistant for more than four years.
(4) People with junior high school education or below must be engaged in professional and technical work for more than fifteen years and hold assistant positions for more than four years.
3. Senior title:
(1) graduated from university, engaged in professional work for more than ten years, and held intermediate positions for more than five years.
(2) graduated from college, engaged in professional and technical work for more than fifteen years, and served as an intermediate position for more than five years.
(3) graduated from secondary school or high school, engaged in professional and technical work for more than 20 years, and served as an intermediate position for more than five years.
List of application materials
1. professional and technical post evaluation form (in duplicate for juniors and seniors) and attachment form (in duplicate); The main performance column in the front form should be filled in in detail.
2 last year's "professional and technical personnel assessment registration form".
3. Professional papers and business work summary.
Requirements for professional papers:
(1) Be sure to write it yourself, and don't copy it.
(2) to combine my work and post reality.
(3) The number of words shall not be less than 3,000.
Business work summary requirements:
(1) Write your work experience clearly.
(2) Write clearly the main projects that you are responsible for or participate in.
(3) indicate the published papers or major achievements and awards.
(4) The number of words shall not be less than 1500.
4. Submit the original graduation certificate and junior professional title certificate.
5 "Professional and technical personnel level ability test certificate";
6. Other relevant materials that can reflect my work ability and important performance.
7. Six one-inch color photos and two copies of ID card and diploma.
Those who fail to prepare relevant materials according to the above requirements will not be accepted.
Second, exceptional reporting conditions.
1) Applicants for senior positions must meet the following two conditions without exception:
1, the academic leader commended by the Ministry and the provincial level; Young and middle-aged experts who have made outstanding contributions at or above the prefecture level; Township entrepreneurs or outstanding factory directors and managers who have been commended by the state and the provincial level.
2. Won the third prize of national scientific and technological progress; Above the second prize of the province and the Ministry; The main finisher of the first prize (including invention award, achievement award, natural science award and spark award) above the city level; The main person in charge of production technology who won the national gold and silver product award or the provincial and ministerial famous brand product award or the excellent engineering award; The main person in charge of production technology who won the national and provincial new product awards.
3, directly presided over the completion of large-scale projects or fully responsible for the production and operation of large and medium-sized enterprises or made outstanding contributions to the technological development of non-public enterprises, and achieved obvious economic benefits; The main person in charge of the enterprise has an operating income of more than 20 million yuan for two consecutive years (the mountainous counties determined by the province100000 yuan or more), or a profit and tax of more than 4 million yuan (the mountainous counties determined by the province).
4, in the technological invention, innovation, transformation, patent, popularization and application, for two consecutive years (two years before applying for senior positions), the economic benefits accounted for more than 20% of the total corporate profits and taxes (more than 4 million yuan, more than 2 million yuan in poor mountainous areas).
5. Major contributors who have created valuable experience in their professional and technical posts and promoted them in the same industry in the province; During his tenure as an intermediate post, he has made remarkable achievements and won the title of advanced worker at or above the provincial level; Or on the ground ... >>
Question 4: What are the main contents of applying for promotion to intermediate title? 1, work performance, achievements, work ability and level.
2. Continuing education.
3. The situation of the paper.
Question 5: How to write the application form for the promotion of enterprise quality engineer to full employment? It is highly recommended that you take the quality engineer exam, but this year's registration has ended. The exam started in June this year, and you can take it again next year. I wish you success! I am a system auditor, so I have to spend some time studying more. I hope you succeed!
Question 6: How to write the abbreviation of promotion experience Dear company leader, I'm Li Yinhua, and I joined in August 20 12. After I was hired, I worked as an electromechanical engineer in an enterprise in Changsha, responsible for the maintenance, overhaul and improvement of equipment in an enterprise and the relevant preparations of Yongzhou Project Department. On July 20 14, I was appointed by the company and transferred to Yongzhou branch to be responsible for the equipment installation, debugging and team building of the production technology department. Now I will make a brief summary and review of my work since I joined the company, and make a concrete statement to the leaders, please comment on: equipment installation and debugging. On March 20 14, he was fully responsible for the installation and debugging of workshop equipment. By mid-June, 14, the power connection of workshop equipment was completed as scheduled. Installation and welding of batching equipment, high-efficiency mixer, kiln and crusher crushing platform, installation and platform welding of airflow crusher, welding of water supply and pressure air pipeline of air compressor cold dryer equipment, maintenance of electrical and hydraulic system of secondary kiln, installation of screening and iron removal packaging equipment, water supply and power supply, dust removal system of the whole workshop, etc. During the whole installation process, all the work was carried out in an orderly manner, and no safety accidents occurred, and the installation and debugging tasks were efficiently completed within the specified time. Team building. After being transferred to Yongzhou Production Technology Department, the interview and recruitment of production personnel and maintenance workers were completed, maintenance classes and production classes were set up, employees were organized to learn the company's relevant systems, maintenance workers were trained in safety and equipment maintenance, operators were organized to conduct post guidance training, and departmental activities were organized to increase employees' cohesion and sense of belonging to the company. System construction. According to the update of production technology and equipment, the operating rules and maintenance system of the first equipment of the enterprise are comprehensively revised. After the establishment of Yongzhou production technology department, according to the actual situation, a temporary system of personnel and site management was established. Aiming at the new equipment in Yongzhou, the corresponding equipment management system, operation rules and maintenance system are compiled and implemented. Site management and production operation. Because the production workshop has just been established, employees' awareness of the site is weak, so employees are organized to learn 5S management methods and control methods of metal foreign bodies in the workshop, and the workshop is divided into regions, production tools are positioned at fixed points, identification labels are made, and the reward and punishment system is studied and implemented. The workshop passed the quality inspection to confirm that it meets the production requirements. The trial production and various tests of B 15, as well as some tests of lithium cobalt oxide line change, were successfully completed, ensuring that there were no safety accidents and quality accidents on site. The above are several key tasks that I completed during my tenure in the company, so I won't say much about the rest of my daily work. Looking back on my five-year work experience, I also make a simple summary of my own abilities and characteristics: as an employee, I have good professional skills and professionalism, and I will do my job well, actively strive to complete the tasks assigned by the leaders, and strive for breakthroughs and innovations. As a grass-roots manager, I can unite my colleagues, get their approval and establish my own prestige. Looking back on these years in Ruixiang, getting the approval of the leaders is the biggest motivation. I will work harder in the future and continue to grow with the company.
Question 7: How to write the job performance and self-evaluation of engineers and technicians when they are promoted? self-assessment
Strong sense of responsibility, good start and good finish, serious work, willing to endure hardships, strong plasticity and strong ability to learn again. Good at summarizing and reflecting. Good sense of cooperation and dedication, strong ability to analyze problems, strong sense of crisis prevention, able to reconcile various contradictions, generous and steady, sincere and practical, always facing and pursuing with an optimistic attitude.
I suggest you refer to the following pages: zhidao.baidu/question/87128245, and then write it in the form of "personal summary" according to your actual work.
Question 8: Software engineer is promoted to ppt. How to write the steps of making PPT?
First, before making the PPT template, you should prepare the pictures placed on 1 PPT, the pictures on the inside page of PPT, logo and other pictures.
Second, create a new PPT file, and a blank PPT file should be displayed at this time.
Third, the production of PPT template structure
Fourthly, make the content frame of PPT template.
5. If you have a high demand for PPT, I'll tell you a trick. Actually, you can find someone to do it for you. I know an online studio called You Zuo Yi, which is very professional. I used to work there.
Software Engineer English is software engineer, which is a professional ability certification for software professionals, indicating that they are qualified as engineers. Software engineer is a general term for software developers.
It is a broad concept, including a series of positions such as software designer, software architect, software engineering manager and programmer. Are all related to software development and production. The technical requirements of software engineers are comprehensive. In addition to the most basic programming language (C language /C++/JAVA, etc. ) and database technology (SQL/ORACLE/DB2, etc. ), as well as JAVASCRIPT, AJAX, HIBERNATE, SPRING and many other cutting-edge technologies. In addition, other technologies about network engineering and software testing should also be dabbled in.
Question 9: How to write the numerical report of technical support manager for technical support promotion ~ ~ urgent! A job that you are qualified for. Your opinion and the reason why you can do it. . . . . . . . .
Question 10: What are the conditions for a senior engineer to be promoted? What are the application conditions for senior engineers?
(1) education
Have worked as an engineer for 5 years and meet one of the following conditions.
1, bachelor degree.
2. After being recognized by the state, I have obtained a bachelor's degree and worked in this major for 15 years.
3, college graduates directly engaged in professional and technical work for more than 20 years (including 20 years).
4. Having been engaged in professional and technical work for more than 25 years (including 25 years) after obtaining a college degree.
5, technical secondary school graduates directly engaged in the professional and technical work for more than 28 years (including 28 years).
6. Obtain technical secondary school education and engage in professional and technical work for more than 30 years (including 30 years).
(two) foreign language conditions, and meet one of the following conditions.
1, take the national foreign language proficiency test and pass the test within the validity period.
2. Those who meet the requirements for exemption from the examination of Shaanxi Renfa No.200552 and Shaanxi Renfa No.2007 12 1 (those who are exempt from the examination fill in the examination exemption approval form).
(three) computer conditions, and meet one of the following conditions.
1, and obtain the certificate of computer application ability examination (5 modules).
2. Those who meet the requirements of exemption from examination stipulated in document No.34 [2005] of Shaanxi Renfa (the exemption personnel fill in the Examination Exemption Approval Form).
(4) Conditions for writing a thesis
One of the following conditions must be met (obtained during the current employment period).
1, 1 published professional academic works (ISBN required), in which I wrote more than 20,000 words.
2. Publish 2 professional papers in scientific journals at or above the provincial level (journals must have ISSN or CN numbers), limited to the top 2 authors, of which 1 is the first author.
3, won the third prize of provincial and ministerial science and technology awards above 1, only the top 5; Or won the first prize of municipal and departmental science and technology awards 1, limited to the top 5; Or won the second prize of municipal and departmental science and technology, all of which are the top 2.
4. Those who do not meet the above requirements are only proficient in the professional knowledge of this discipline, master the basic theory of this discipline, and understand the development trends of science and technology at home and abroad. During his tenure, he has made remarkable achievements and made outstanding contributions in his professional and technical work. Those who submitted the participating papers were rated as excellent by peer experts and passed the thesis defense can also participate in the review.
(5) Other conditions.
1, family planning qualification must be tested.
2. In the past two years, the annual assessment of professionals has been excellent.
Engineer's declaration conditions
(1) education
Have been employed as an assistant engineer for 4 years and meet one of the following conditions.
1, bachelor degree.
2. After being recognized by the state, I have obtained a bachelor's degree and worked in this major for 15 years.
3, college graduates directly engaged in professional and technical work for more than 20 years (including 20 years).
4. Having been engaged in professional and technical work for more than 25 years (including 25 years) after obtaining a college degree.
5, technical secondary school graduates directly engaged in the professional and technical work for more than 28 years (including 28 years).
6. Obtain technical secondary school education and engage in professional and technical work for more than 30 years (including 30 years).
(two) foreign language conditions, and meet one of the following conditions.
1, take the national foreign language proficiency test and pass the test within the validity period.
2. Those who meet the requirements for exemption from the examination of Shaanxi Renfa No.200552 and Shaanxi Renfa No.2007 12 1 (those who are exempt from the examination fill in the examination exemption approval form).
(three) computer conditions, and meet one of the following conditions.
1, and obtain the certificate of computer application ability examination (5 modules).
2. Those who meet the requirements of exemption from examination stipulated in document No.34 [2005] of Shaanxi Renfa (the exemption personnel fill in the Examination Exemption Approval Form).
(4) Conditions for writing a thesis
Obtained during the current term, and has ISBN number.
(5) Other conditions.
1, family planning qualification must be tested.
2. In the past two years, the annual assessment of professionals has been excellent.