1: Selection of sprinkler irrigation
Sprinkler irrigation is naturally Tamiya’s model-specific sprinkler irrigation that is the best, but the price is too expensive. The main domestic brands of sprinkler irrigation are 7CF and Krimei. .Compared with Tamiya, the particles of domestic sprinkler irrigation are larger. 7CF has more agents across the country and has more color choices, but the particles are very large. The market of Krimei is not as wide as that of 7CF. It may not be available in places.
Two: Preparation work before sprinkler irrigation
Domestic sprinkler irrigation is toxic~! Everyone must be aware of this. Please wear a mask before spraying. Generally speaking, paint stores have them For sale, large paint stores should have gas masks and activated carbon.
Please be sure to spray in a ventilated area~! Everyone must remember~!
Three : Application of sprinkler irrigation.
The particles of sprinkler irrigation are relatively large, so everyone must shake them evenly before use. Generally speaking, you need to shake them evenly for 3 to 5 minutes. This will make the particles you spray out relatively smoother. Delicate.
Before spraying, please try spraying in other places to test the air pressure of the sprinkler and how much finger force you need to press it.
Please pay attention ~ Do not spray. Do not spray directly on the part, as it is easy to spray very thickly. Start spraying 20 cm away from the part 5 to 10 cm away. During the spraying process, move toward the part quickly and evenly until you spray about 5 cm past the part. Stop spraying.
Please do not spray all the paint at once. Please spray it multiple times in layers to avoid it being too thick. This is very important. Try to spray as thinly as possible each time, and then wait until the surface is dry before spraying another layer.
Please use the cross spray method when spraying. That is, spray a thin layer vertically first, wait until the surface is dry, and then spray a thin layer horizontally.
If you are spraying parts with convex surfaces, please Paint the corners that are not easy to be sprayed first, so as not to over-paint the areas that have been sprayed when you find that they have not been sprayed and then re-spray.
Four: Post-painting treatment
After spraying is completed, please turn the spray can upside down and spray off the small amount of paint remaining in the nozzle to avoid affecting the next spray painting.
When it comes to electroplating colors and metallic colors, it seems that they have always been the patent of airbrushes ~ but In fact, sprinkler irrigation can also spray a small amount of metallic and electroplating colors.
However, if you want to spray metallic and electroplating colors, it is not enough to rely only on domestic sprinklers. Players who have the conditions should still buy Tamiya. Sprinkler irrigation
1; background color
For sprinkler irrigation players, there is no choice for the metallic background color. The only one is to use imitation chrome-plated sprinkler irrigation, which costs about 20 to 25 yuan. It is the most expensive type of domestic sprinkler irrigation~
The effect it sprays is equivalent to the super silver background color of an airbrush, but of course it is still slightly worse than that of an airbrush~
In Before using this sprinkler, please be sure to polish the surface of the parts smooth without any bumps or bumps, and shake it evenly before use. Do not spray in humid weather. If you are a player in Fujian, please do not go during the typhoon season from June to September. Don't spray this stuff in Guangdong during the rainy season. Players in Shanghai should avoid the mildew season in May and June because once the air is moist, the spray effect will be dusty and it will be an absolute nightmare~!
If you only want to spray silver plating, this sprinkler is enough. It doesn’t matter whether you apply a background color or not. The covering power of the chrome sprinkler is super strong~! If you want to apply a low color, choose glossy black.
Two: Metallic color
Generally speaking, the best metallic colors in domestic sprinklers are chrome-plated silver and galvanized gold. Note that the gold color of galvanized is real gold and not khaki or dead yellow
Of course, there are many metal flash sprinklers to choose from in domestic sprinklers, but generally speaking, the particles are very large ~ spray on real cars The effect is very good, but it is very bad for a model with only 1＼100.
Electroplating silver and electroplating gold can directly use domestic sprinklers to express the spray gold. If you must use a chrome base color, the effect will be Very good
If you want to spray other metallic colors, you must buy Tamiya
It’s sprayed~
It’s painted with chrome silver and then sprayed with Tamiya’s metallic blue or red. It can be said to be quite impressive~ much stronger than spraying it directly with metallic blue~!
Three: Precautions
Please note that the electroplating color of domestic sprinklers can easily lose luster ~ so please spray all the metallic colors to be sprayed and dry them thoroughly as soon as possible Immediately apply gloss paint to protect it ~
If it cannot be completed in one day, please spray it separately ~ It is best not to leave the electroplated silver overnight ~ Especially in the southern places with heavy humidity, the strength of chrome silver plating after one night The reflective luster will disappear~
The choice of background color is very important for coloring, especially for domestic sprinkler players. Because it is related to the success or failure of your coloring.
Commonly used background colors:
Matte, light gray, medium gray, deep gray, silvery white (white is not recommended ~ white is the most corrosive in sprinkler irrigation)
Electroplating background color:
Imitation chrome plating spraying (I will explain the electroplating color spraying method in detail in the next lecture)
Selection of background color:
Clean spray method:
Most people still like to play clean when playing Gundam. The choice of such a background color should be based on the brightness and coverage of the color you want to spray.
If you want to spray glossy red, glossy red has a higher brightness and is not very covering. Here you need to choose a color with strong hiding power and high brightness as the base color.
Generally, you can You can use silvery white or bright yellow. Bright yellow is not very covering, but the brightness is very good, which can make red more vivid. When I spray red, I usually choose imitation galvanized sprinkler, because its particles are more delicate and the golden background color It can also make red look textured.
For example, when spraying blue, a color with low brightness but poor coverage, you can choose a gray base color that is similar to it.
Sprinklers with good coverage such as black and gray silver can ignore the background color.
Old background color selection
If you like heavy taste, you can choose matte black This kind of sprinkler irrigation. Because the matte black particles are very rough, it can create a cast iron effect very well. Gray is also a good choice.
Are you satisfied with this answer? Hahaha