1. What is the reason for printing with horizontal stripes? How to solve it?
Answer 1. When installing the ink cartridge, air enters, which is solved by cleaning the print head 1-2 times.
2. The ink cartridge is installed incorrectly, so it can be solved by reinstalling and cleaning the print head 1-2 times.
3. The print head is aging and needs to be replaced or repaired.
2. The machine cannot recognize the newly installed ink cartridge.
Answer: 1. Because the chip is touched by hand or there is dust on the chip, it is impossible to identify the ink cartridge with the chip. You can clean the chip with a dry paper towel and reinstall it.
2. The spring contact on the print head contacting the chip is invalid or damaged.
3. The spring on the print head of chipless printer fails elastically.
3.NE-00 193 ink cartridges print more pictures than those on computers. What is the reason? How to solve it?
A: The picture printed by the printer is not exactly the same as the actual picture of the computer, and it has a lot to do with the computer drawing or its own pixels. If adjustment is needed, you can make corresponding color adjustment as needed in the File-Print-Properties-Customize-Advanced dialog box.
4. The printed text or table has slight burrs.
Answer: 1. Please change the paper if it is wet.
2. The print head is aged, repaired or replaced.
5. When printing the form, the vertical line is not straight, like a ladder break.
Answer: The print head is out of position due to paper jam or other reasons, which can be solved by File-Print-Properties-Application Tools-Print Head Calibration.
6. The external structure of Gezhi ge NE-OT32 1-4 ink cartridge is different from the original one of Epson. Does it affect the use?
A: Gezhige NE-OT32 1-4 is a patented sponge-free product designed by Zhuhai Nasda Electronic Technology Co., Ltd. ... Its structure is different from the original one. Its remarkable features: better printing fluency, higher ink utilization rate, less residual ink and more environmental protection. When in use, first take out the blue protective pad (see figure 1), then tear off the yellow gas guide film (see figure 2) and install it normally.
7. Some ink cartridges feel small print volume when used. How to ensure the ink filling amount of each ink cartridge in factory production?
Answer: The printing quality is directly related to the set resolution, coverage and cleaning times of the print head. The set resolution is high, the coverage is large, and the print head is cleaned many times, so the printing quantity will be reduced. The ink quantity of the same model ink cartridge is the same. In order to ensure that the ink quantity of each ink cartridge meets the requirements, the factory checks the ink quantity of each ink cartridge through an electronic scale when filling ink.
8. Can I print my ID card with dye cartridges? Will it fade?
A: Dyed ink cartridges can print ID cards, but the waterproof and light-resistant performance of dye ink itself is not as good as that of pigments. Therefore, when ID cards are often exposed to the sun, it is best to print them with dye-based ink cartridges, which will cause fading.
9. Northeast OTO 38-9 is difficult to print on canvas.
Answer? Canvas is a special printing medium, and ordinary dye ink box is really difficult to print on canvas.
10, e-nto17/18/40/41ink cartridge (black object) is a patented product without sponge structure designed by Nastar. Their remarkable characteristics are: better printing fluency, higher ink utilization rate, less ink residue, more environmental protection and more convenient ink replenishment.
1 1, the printer prints garbled code, how to solve it?
Answer: 1. If there is something wrong with the printed files, please delete all the printed files, shut down and restart in a few minutes.
2. The printer driver does not match, so reinstall the driver online to solve the problem.
3. If the interface cable is damaged, please replace it.
4. Motherboard failure, repair or replace the motherboard.
12. The display light of Epson printer will flash when it is turned on or used.
Answer: 1. If the waste ink tank is full, just use a special adjustment program to zero it.
2. If the carriage or paper feed clutch fails, please lubricate the carriage, guide rail or clean the clutch.
3. The motherboard is damaged. Repair or replace the motherboard.
13. The computer with the newly installed ink cartridge shows that the amount of ink is as low as before.
Answer: 1. The window still shows the original amount of ink. Refresh the display window and display it again.
2. Reinstall the ink cartridge installed under abnormal operation.
14. When Epson printer prints or copies, the computer prompts the words "non-original ink cartridge". Can I keep using it? Does it affect printing?
A: This is set by Epson manufacturer on the printer. When prompted to use a non-original ink cartridge, just click Yes or Yes. This has no effect on the printing of the ink cartridge itself.
15. When using the thermal transfer ink cartridge, the printing effect is good, but the transfer effect is not ideal. What are the special requirements for transfer?
A: The thermal transfer ink cartridge is a special kind of ink cartridge. Its function is to transfer the pictures or words that need to be output to the media we need through inkjet paper. During thermal transfer, the transfer tool should be completely consistent with the surface of the transferred medium. For special media such as metals, baking paint is needed, and ceramics need chemical coating treatment.
16. After cleaning the ink cartridge with NCL-00 1 10, the machine still can't print normally.
Answer: Cleaning the ink cartridge is to clean and clean the blocked print head to make it smooth. It is normal to clean a print head that is slightly or not seriously blocked, but it is not guaranteed to clean an aging or damaged print head.
17 and NE-00 193 ink cartridges tear the air guide film. Will a little ink on the air channel affect printing?
A: No.
18, print pictures on plain paper, set the mode to high speed, and the color is very light and unclear.
Answer: Because of the material of paper, ordinary paper is not suitable for printing high-quality pictures. When you need to print pictures, try to use colored paper or better quality paper, and the resolution of printing mode above 720dpi will achieve ideal results.
19, NC-00003 series ink cartridges, open the protective cover, and ink leaks from the ink outlet.
Answer: Due to the requirements of production process, when using the ink cartridge, the air guide film should be torn off first (as shown in figure 1), and then the protective cover should be opened (as shown in figure 2). Reversing the order may lead to ink leakage. This is also stated in the instruction manual, and the ink cartridge must be used according to the requirements of the instruction manual.
20. Should I clean the print head when I used other brands of ink cartridges?
A: It depends on the quality of the brand used before. Usually, there is no need to clean the print head. In some cases, the print head can be cleaned 1-2 times to print normally.
2 1, Epson C20 printer was used normally one month ago, but it could not print after being idle for one month.
Answer: Because the printer has not been used for a long time, maybe the print head is dry, so you can clean it. Even if you don't use a printer, in order to ensure the best printing quality, we suggest that you turn it on once a week and fill the machine with ink. This is beneficial to the use and maintenance of the machine.
22、NH—006 14； NH—00629； NH-00626 Can I replenish the kit from the bottom of the ink cartridge?
Answer: NH-00614 produced by our factory; NH—00629； NH—00626； The ink cartridge can be filled from the top instead of from the bottom. See the corresponding instructions for specific methods.
23. The samples printed by NE-T5441-8 (220 ml) dried slowly.
Answer: 1. The paper does not match. Replace the printing paper to solve it.
2. The environment humidity is high and the printing environment changes.
3.NE-T544 1-8 (220 ml) is pigment ink, which dries a little slower than dye ink.
24.NE-OT036/NE-OT038 ink cartridges feel that the printing volume is small.
Answer: This is determined by the design. Its ink cartridge capacity is smaller than other inks.
25. ne-oto13/ne-ot014 ink cartridge how to replace the ink cartridge on the epson Color 480 printer?
Answer: Because the Epson color 480 printer has no buttons, it is impossible to change the ink cartridge by pressing the buttons. You can change the ink cartridge by clicking File-Print-Properties-Utility.
26. after installing NE-OT029/NE-OT04 1, the machine cannot recognize the ink cartridge.
Answer: 1. The ink cartridge was not replaced according to the normal procedure, and the ink cartridge was reinstalled according to the normal procedure.
2. Touch the chip of the ink cartridge or stick dust on it, take out the ink cartridge and wipe the ink chip with a paper towel for reinstallation.
3. The elastic point of the print head contacting the chip is invalid or damaged and should be repaired or replaced.
27. After the ink cartridge is installed, it cannot be printed at all.
Answer: 1. The yellow gas guide film has not been torn off. After tearing off the air guide film, reinstall and clean the print head 1-2 times.
2. After the ink cartridge is installed, air enters, the print head is cleaned and the gas is exhausted, and the problem is solved.
3. The print head is aged or damaged. Repair or replace the print head.
28, ne-ot027 ink cartridge printing color deviation.
Answer: 1. The nozzle inspection is broken, so clean the print head until the nozzle inspection is normal.
2. Use the color adjustment in the driver to solve:
By clicking on file, printing, properties, customization, advanced color control, and adjusting the corresponding color ratio as needed, the printed output will achieve better results.
29. The ink cup level of NC-00003 series ink cartridges is not as high as the original one. Is the amount of ink low?
Answer: The ink cup width of NC-00003 series ink cartridges is wider than the original ones, and the liquid level height is slightly lower than the original ones. The actual ink amount is the same as the original ink amount.
30. NC-000 10bk ink cartridges were installed on Canon BJC-50 printer, and it was found that many ink cartridges could not be installed.
Answer: Because Canon BJC-50 printer can use NC-000 10BK or NC-000 1BK, the corresponding ink cartridge should be selected according to the printer head configuration of the machine itself. The same is true for many models such as Canon. Users should pay attention to comparison and purchase when using.
3 1, epson PHOTO 950 printer has a new set of ink cartridges, and the machine can't print.
Answer: 1. Check the status of the ink cartridge through the printer-driven main window or the status viewer in the utility, and then take out the ink cartridge wiping chip displayed as ""and reinstall it.
2. The spring contact of the print head contacting the ink cartridge chip is invalid or damaged. Repair or replace the spring contact.
32. Epson EX3 printer is equipped with NE-00 193 ink cartridge, which can print one or two pages. The computer shows that there is no ink, so it cannot be printed.
Answer: 1. The print head recognizes that the spring plate of the ink cartridge is invalid or corroded and replaces the spring plate.
2. If the protective clip of the ink cartridge is loose, please remove the print head and press the protective clip again. If it is deformed, it needs to be replaced.
33. After installing NH-00626 ink cartridge, all indicators are flashing.
Answer: 1. Ink or other dirt sticks to the circuit of the ink cartridge. Dry the net weight and put it on again.
2. The contact circuit between the printer and the ink cartridge is stained with dust or damaged. Please wipe or repair the circuit.