1, the liquid in the barrel is charged.
This is mostly caused by the connection between the impeller shaft and the live part, so it is important to check the insulation and water leakage of the electrical equipment under the bucket until the fault is eliminated.
2. The shell is charged.
When charging the shell, check whether the power cord is damaged or exposed, find out the leakage part and wrap it with insulating tape. If the capacitor itself is damaged, it should be replaced.
3. Electromagnetic induction produces induced electricity.
At this time, even if the washing machine is well insulated, the glow phenomenon can be detected with the measuring pen. Generally, the induced electric energy is small, which will not cause harm to personal safety. The methods to eliminate induced electricity are as follows: 1. Connect the grounding wire of the washing machine; The second is to switch the power ground hole and insert the original plug into the ground hole instead of the live wire hole.
4. Static electricity.
Static electricity is the result of strong electrostatic induction of washing machine, which has great energy and can give people a strong electric shock in severe cases. There are two ways to eliminate static electricity, one is to replace the belt or pulley; Secondly, soak the belt in clear water for about 2 hours, take it out to dry, and then reinstall it.
Extended data
Precautions for water leakage of washing machine:
1, power cord
When the washing machine is in normal use, the power cord plug should be easy to plug in and out by hand. Unplug the power cord when power is cut off, moved, not used or cleaned. Please don't use wet hands to plug in or out.
When pulling the plug, you should hold the plug tightly and then pull it out. Don't pull the power cord. Please do not bend, stretch, twist, bind or let heavy objects weigh the power cord. Please keep the power plug clean. If there is dust, please wipe it off carefully with a dry cloth.
2. Do not use hot water above 50℃. Hot water above 50℃ will deform and age plastic parts.
3. clothes that can't be washed
Due to the risk of fire, please do not use gasoline, kerosene, alcohol or solvent to wash or dehydrate clothes. Clothes such as bread coats and down jackets are bulky and the materials are not easy to absorb water. The pulsator washing machine may always float on the water during the washing process, and it is difficult to turn over freely, which is not suitable for machine washing. Therefore, users are advised not to use the washing machine to wash heavy clothes such as bread clothes and down jackets.