The interior space of Reiz is perfect, the self-luminous instrument panel is lit, and the dark instrument panel is equipped with a silver center console, which lays the foundation for sports fashion. The interior is of good grade, with excellent materials and workmanship. The only drawback is that the audio equipment is not enough, and car owners with high audio and video requirements will choose to upgrade and modify.
In this modification, the Japanese Pioneer P99 sound quality high-end host is selected as the main sound source output, and it is installed in the center console in an inverted way. The front sound field is equipped with a group of three-band speakers, and the American DD LE-M 10 subwoofer installed in the trunk is very shocking. Of course, in a good sound system, the power amplifier plays an important role. The amplifiers that drive the whole sound system are a DD DM 1000 amplifier, a Taishan Star B2 amplifier and a Taishan Star B4 amplifier. Excellent control and analysis ability fully embodies the characteristics of the whole sound system.
Pioneer P99 Host
A-pillar reverse mould installation of Beway horn unit
Installation effect of integral inverted mold for center console
Demonstration of luggage inversion technology
Toyota Reiz modification configuration list/host: Pioneer P99/ amplifier 1:DDDM 1000/ amplifier 2: Shanxing B2/ amplifier 3: Shanxing B4/ front sound field speaker: Bevis tri-band/woofer: American DD LE-M 10.
This case won the modified sound quality championship of M4++ group in China MECA Finals.
Toyota reiz car audio can of course be upgraded, and the effect of adding Yinbole DSP audio processor is very obvious!
Recommended scheme: The top of Yinbole T8 is equipped with a DSP machine to solve the sound quality problem of the original car. Use the special wire harness for the special car for nondestructive upgrade, and do not disconnect or change the original car line. After more than ten minutes of installation, you can feel the effect immediately. Inbole AE intelligent algorithm patent brings more dynamic bass performance, deep dive and strong explosive power; Vocal performance is more sweet and faithful, very delicate; The high notes are clear and layered. 5. 1 channel brings theater-level sound stage effect, which is 8 times higher than the original car.
The Voice of Music in Wuhan has abundant cases of refitting Toyota Reiz car audio.
The modification and upgrading of car stereos are large and small. Generally speaking, it is healthier to change! You can get a good mood every day with a little investment, and you can earn money, but you can't buy a good mood with money ~ spend a little money, but enjoy it yourself, which is worth it!
Toyota Reiz refitted car stereo for the first time. The host likes listening to music very much. He used to listen to the home stereo at home, and then went back to the car to listen to the sound effects. In the words of the owner, it is "ugly".
The Sound of Music
The Sound of Music
Modification and configuration of Toyota Reiz car audio:
Original owner's engine
Decoding: Rubik's Cube DSP6 decoding processor.
Pre-sound field: a set of 232 speakers from Danner, Denmark.
Rear sound field: a set of coaxial speakers in Asott, Germany
Power amplifier: one Rubik's cube five-way power amplifier.
Bass: French Lucia 10 inch subwoofer.
Four-door environment-friendly three-layer sound insulation belt with trunk energy super Windsor sound absorption treatment
Construction Store: Wuhan Music Voice Auto Audio Refitting Store
Construction duration: 6 hours /4 people working at the same time.
Door panel sound insulation is the basis for speakers to produce good sound! Construction standard for ~ ~ three layers of Jiajing environmental protection sound insulation materials.
When the car is quiet, the sound effect of the car will be better. The weak sound insulation and vibration suppression of Toyota Reiz iron sheet is very beneficial to the sound insulation and noise reduction of iron sheet, with good sound insulation effect and beautiful music in the car.
Dana speaker is installed at the front door, and the sound insulation of the door panel is very fine. From the details, the attitude and craft of the sound of music are worthy of the choice and trust of the owner ~
Axott coaxial horn is installed at the back door, using special waterproof wood gasket, which has the first-class waterproof and shockproof effect of iron sheet!
Dyna 232 is an entry-level series of speakers with fever level in Danna. The sound details are good, the sensitivity is high, and more importantly, the price is close to the people, which satisfies the people who love the brand Dyna, and also meets the demand of owning a set of car audio speakers in Danna.
Tanner treble installation ~ ~
The power amplifier and decoder are installed on the backrest of the back seat, with regular wiring and the best details. Each wire has a special socket to avoid after-sales due to poor contact. The specialty store is full of details and ingenuity!
Trunk 10 inch original subwoofer installation.
The sound of this system is very good, delicate and natural, audible and explosive. Listening to pop songs is emotional and occasionally dynamic. The front and rear door speakers of the five-channel power amplifier can also independently push a subwoofer when pushing up. Although the size of the power amplifier is very small, its energy is very large. The output of single-channel power amplifier reaches 300 watts, and the control of pushing Lucia bass is excellent. Rubik's cube decoding has super resolution and computer-specific debugging software, which modifies and finely carves the details of sound. When you calm down and listen, you can feel the ups and downs in your heart and blend in with the music. . .
Yes, here is a case recommendation, I hope it will help you.
What is the function of music? Music can make people feel relaxed and happy, music can relieve people's troubles, and music can relieve people's pressure. Music is the spiritual enjoyment of human beings, and we should respect and admire music. It will be a great blessing to have music in the car trip. Some time ago, the owners of Toyota Reiz went to road trip, but they were not so lucky to enjoy music during the trip because the sound system was not good. Just after the trip, he drove Reiz to the car stereo refit shop.
Toyota Reiz Audio Upgrade Configuration:
Front Sound Field: Tri-frequency Division of German and German Audio Rhyme
Power amplifier: German Gold Acoustics GR2225
Power amplifier: GT2 120 of German Gold Acoustics.
Power amplifier: German Gold Acoustics GR495
Subwoofer: German Gold Acoustics GT 104
In the front sound field, you choose to install German SO audio three-band speakers. This set of speakers is necessary for both workmanship and materials. Exquisite workmanship and exquisite materials. The sound is like a mountain stream, clear and clean, giving people a refreshing feeling.
In the high-pitched and alto parts, the master made a suitable inverted mold and put it on.
You can see the master's modification skills from the inverted mold technology. If the reverse mold is not suitable and exquisite, it means that the master's skill is average, which may affect the sound quality of the speaker installation. However, judging from the reverse mold installation effect of this Toyota Reiz speaker, it is perfectly integrated with the car and looks like a high-end atmosphere.
A German gold soundtrack GT 104 was installed in the trunk, which increased the intensity of the middle and low frequencies of the music, made the music full of rhythm, and made the boiling rock music more quantitative and high-pitched. Three power amplifiers are installed, namely German Golden Acoustic GR2225, German Golden Acoustic GT2 120 and German Golden Acoustic GR495, which are used to boost the loudspeaker and make the sound quality of the loudspeaker better and better. Gold acoustic GR2225 and gold acoustic GR495 are placed in the trunk together with the subwoofer.
After the modification of this Toyota Reiz stereo, the sound is really different from the original car stereo. Reflected in the texture of the sound, there is a sense of hierarchy. The sound is full of texture, clear and distinct, which makes people feel as if they are there.
As long as there is space, it is possible.
Front sound field speaker: Israel Molly's ultra-high dual-band suit.
Power amplifier: Italian MOSCONI AS200.4 (active sound separation)
Let's look at the main locations where they are installed.
Power amplifier position, if you feel that the bass is not enough, you can choose your own subwoofer. If the shock needs bass and you don't want to change the bottom, you can go to GLADEN's subwoofer.
Front Sound Field Speaker: Israel Morley Monitor 6X
Rear Sound Field Speaker: Israel Molly Tingbao 6X
Sound insulation: four doors and double floors
Scheme 3: Detailed recommended configuration for refitting Toyota Reiz car audio.
Host: original host+Gele HX_D3
Front sound field speaker: Israel Molly's ultra-high dual-band suit.
Amplifier 1: Italian MOSCONI AS200.4 (active sound separation)
Amplifier 2: American K brand ZX 1000. 1 single channel amplifier.
Subwoofer: American K brand SC 12 subwoofer.
Capacitance: Altemar battery
Wires: RAMM speaker cable, audio cable
Scheme 4: A dealer in Dongguan recommends the luxury model.
Murray's highest pitch
Front door Morey highest bass unit installation
Back door Murray Highbury treble and alto
Main champion amplifier MOSCONI AS 240.2 amplifier plus spiral subwoofer
Option 5: A dealer in Huaihua saves money.
Audio source: original owner's engine
Front door speaker: Israeli Moremas dance dual-frequency speaker set
Back door speaker: Israeli Morimasi dance dual-band speaker.
Power amplifier: Hong Kong Harley SA-804 power amplifier.
Yes, sound is the means, and music is the purpose. Many car owners have such a misunderstanding: they regard the installation of expensive audio equipment as a show-off capital, or use a dazzling set of audio to express their high-end or fashionable image. But when music is regarded as an accessory, sound becomes the main purpose, and car owners will never feel the happiness brought by music.
The shape design of Reiz is very charming. Through the best body proportion full of dynamic charm, the beauty of agility and elegance unique to luxury cars can be realized. The surface of the car body is shiny, gorgeous and full, which breaks through the traditional concept of the same class car. Really won the hearts of many people.
'
The car audio system equipped by Toyota Reiz is quite simple, so it is difficult to play comfortable and pleasant music. Moreover, because the car mainly focuses on the sense of motion of the car, the noise generated by the engine and the external wind noise will also affect the quality of the sound. Therefore, car owners want to improve the sound quality of their cars through sound modification, bringing spiritual and musical enjoyment.
Configuration list
Four-door car sound insulation: Big Blue King Kong
Front sound field: Tress S6.2C
Rear sound field: Res horn
Power amplifier: Tres TR- 100.4
Processor: abstruse R6
Capacitance: stress capacitance
Four-door sound insulation
There is a close relationship between upgrading the sound system and sound insulation: if upgrading the sound system, at least the sound insulation of the door panel should be done well, which can not only reduce the * * * vibration when the speaker sounds, but also form a * * * speaker inside the door panel, which is very important for the medium and low frequencies. The sound insulation of other parts can be done in a targeted manner. And four-door sound insulation is indispensable.
A-pillar inversion die
Tres Laba, front sound field
Because there is no accurate sound field location in the high-pitched position of the original car, professional technology must be used to locate the sound field and invert the A-pillar during the installation process. Confirm the details before installing and debugging the horn. The installation of high-pitched inverted formwork for A-pillar is based on many years of rich experience in modification. The inverted mold installation makes the direction of the high-frequency speaker form a convergence point. The width and depth of sound stage will be greatly improved, and the sound will be smooth and mellow.
Inverted mold for optical disk host
Installation of power amplifier, DSP, capacitor and equipment
The sound source, loudspeaker, power amplifier and subwoofer of the whole system are in place, and the collocation is very harmonious. A set of high-quality, personalized audio, instantly enhance the taste! After tuning, the effect is audible, and the music is mellow and delicate without impurities. Detailed and smooth music flows in this workshop, which makes people feel very comfortable. Close the car door, turn on the stereo and enjoy the unparalleled music rhythm of the original car!
You can upgrade, depending on your budget, and give you some modified pictures for reference!
Of course, many riders choose to do sound insulation and sound modification. Here is a case that suits everyone:
Toyota Reiz with red appearance is very eye-catching and is the first choice for many riders who pay attention to life taste. Even if the appearance is coquettish, it is really regrettable in terms of sound and sound insulation. Noisy noise makes people uncomfortable. In order to have a quiet and comfortable listening and driving environment, the owner decided to carry out sound insulation and sound decoration in Shantou Elvis Presley.
Modified model-Toyota Reiz
Toyota Reiz refit configuration:
Front sound field: generator 232 divided by 2
Rear sound field: Molly 602 divided by two.
Subwoofer: Frye P 1 12 inch
Processor: Gehang A4
Bass amplifier: Tomahawk single channel
Front wheel sound insulation: StP bullet+great white shark sound insulation pad+great white shark sound absorption cotton (2 layers) +StP 3M ***5 layers.
Four-door sound insulation: Great White Shark Silver Shark 2+ sound absorbing cotton
Sound insulation of front and rear pedals: StP bullet+great white shark sound insulation pad+great white shark sound absorption cotton ***3 layers.
Audio equipment group photo
The lack of sound insulation measures at the front pedal of the original vehicle can not suppress the noise intrusion from the engine, front axle and road surface, resulting in serious low-frequency vibration noise. In this regard, the technicians used StP bullet+great white shark sound insulation pad as the second layer of vibration reduction treatment, which has a strong vibration reduction and sound insulation effect and outstanding low-frequency noise suppression effect; Then use great white shark sound-absorbing cotton as the third layer of sound insulation and absorption to absorb residual noise.
The front and rear drive chassis should be treated with three layers of sound insulation.
A lot of tire noise is concentrated in the arc of the front wheel of the original car. In addition, the car owners go to many places, the road conditions are complicated, and the noise also annoys the car owners. Therefore, it is necessary to focus on the sound insulation of its components, and choose StP bullet+great white shark sound insulation pad+great white shark sound absorption cotton (2 layers) +STP 3m * * 5 layers of sound insulation materials for noise reduction construction to weaken the tire noise of the front wheel layer by layer.
The wheel arc sound insulation can effectively cut off the transmission path of tire noise.
The sound insulation of the door panel can not only block the wind noise and the vibration noise of the door panel, but also provide a good working environment for the speaker installed on the door panel and improve the sound quality. Technicians use great white sharks and silver sharks to double-layer vibration suppression treatment on the door sheet metal, seal the door sheet tightly, isolate the vibration noise and wind noise of the door sheet, and then soundproof the inner cover of the door sheet with sound-absorbing cotton to further absorb noise and improve comfort.
The double-layer sound insulation inside and outside the door panel can effectively suppress the vibration and reduce the introduction of wind noise.
The third layer of door decorative cover absorbs sound and removes residual noise.
In front of the sound field, technicians installed Dana's 232 dual-frequency set speaker. The bass of this speaker uses Dana's unique MSP magnesium silicate mixing basin, which makes the bass part full and round. The high-pitched part uses a silk diaphragm, which is driven by a powerful magnet to make the high-frequency part naturally transparent. The size of Dynamo 232 frequency divider is also very reasonable, and it is just right to install it in the original position of the car, and it will not make any changes to the original line of the car.
Dana 232 bass is installed in the original position of the front door panel.
Dana 232 tweeter is mounted on the dashboard.
Murray 602 is installed in the rear sound field with two frequencies, and the treble and mid-bass are installed in the door panel. The mid-bass is protected by adding a horn waterproof cover to cope with the harsh environment such as car washing and rainy days. All audio cables are protected by heat-shrinkable sleeve welding, and the details are professional.
Molly 602 treble and bass are mounted on the back door panel.
The bass is Frye P 1 12 inch bass, which is driven by Tomahawk mono amplifier to ensure sufficient power supply at low frequency; In addition, a Gehang A4 processor is added to decode the high-definition audio signal by hardware, so as to ensure that the output signal truly reaches the high-resolution signal quality, make the dynamic range of its sound signal wider, enrich the details, highly restore the high-frequency sound, and present high-quality sound quality beyond CD.
DSP and power amplifier are installed under the seat.
High-quality and environmentally-friendly automobile sound insulation products, coupled with Elvis Presley's professional modification technology and standard construction technology, make Toyota Reiz have a quiet and comfortable driving environment and easily bid farewell to noise; The audio has been greatly improved, and the refitting technician has a good grasp of the installation position of the audio equipment, so that the audio equipment can play its due quality and the owner can be in the best listening position.
This is no problem. We have also changed a lot about Toyota Reiz Audio. However, it is best to find a suitable sound modification. It is recommended to go to a professional sound modification shop to listen to the experience. What others think is suitable may not be suitable for you!
It is very important for the owner to have a pair of "discerning eyes" when Reiz refits the utopia! With the constant change of society, people pay more and more attention to the enjoyment of life, and in order to reduce the cost and the cost of the original car audio, the original car audio effect of most cars is not ideal. So now more and more car owners are refitting their stereos in the aftermarket, so there are more and more car stereo refitting shops, which are professional and fish in troubled waters. It is necessary for car owners to have a pair of "eyes" in case they encounter bad businesses. Today, I'm going to talk to you about the experience of Reiz owners modifying their stereos!
The owner of Reiz changed when he was confused for the first time. At first, he thought that what the refit shop said was quite reasonable, so he listened to the arrangement of the master in the shop, but I didn't know it was such an effect, and I really couldn't listen. Unfortunately, one day, the car owner went to work in a friend's car and found that the friend's car had also been modified with the sound system, and the effect was not bad. Only then did he know that he had been fooled by the first refit shop, and then after a friend's introduction, the owner came back to the store to upgrade the whole sound system.
Configuration of Reiz Auto Audio Refitting System
Organizer: alpine CDE- 163EBT
Audio processor: Germany Hilex 8-channel DSP
Horn: French Jin Lang 165W-RC set.
Quad-channel amplifier: Odison SR4
Single channel power amplifier: Odison Sr1D.
Subwoofer: French Jinlang P25DB
Wire: pure copper wire in Fort Garley, USA.
Capacitance: Hilex 1F
Note: The inverse modulus of column A is divided by two.
Let's take a look at the wire used in the first modification of Reiz. The refit shop didn't add any snakeskin tube or heat shrinkable tube to protect it.
The owner chose the Alpine CDE- 163EBT host, which supports lossless audio format and can meet the user's requirements for high sound quality without CD. Equipped with special USB input and USB cable, you can connect USB storage devices and other functions. Highlights: custom hands-free call sound, built-in equalizer, improve the sound quality of audio source.
Then equipped with audio processor, using German Hilex 8-way DSP, accurately adjust to each speaker, so that the whole sound field in the car is wider, just like a star singing in front of our eyes.
Speakers modified by the owner for the first time.
The front sound field loudspeaker replaces the 165W-RC dual-frequency sleeve loudspeaker, which is the highest level in the highest utopia series of Jinlang, France, and can be called a "small utopia". 165W-RC frequency divider, as a set of speakers from the supreme utopia EM III, fully demonstrates the "ultimate original sound" pursued by FOCAL. Such a suit imported from France not only represents the insistence on music, but also embodies a "truth-seeking" outlook on life.
165W-RC tweeter falls on the A-pillar, and Master falls on the A-pillar.
After the mold is inverted, install the 165W-RC tweeter on the A-pillar.
Odison's amplifier is absolutely irreplaceable in the car audio industry. Every brand has its own excellent products, which I believe everyone understands. The owner just chose the power amplifier from ottesen, which has balanced high, middle and low frequencies, and the sound is brighter and more comprehensive. Two Odison amplifiers are installed on the seat back.
In order to make up for the shortage of bass, Reiz chose the French Jinlang box subwoofer, showing a more vigorous and elastic bass effect. Jinlang subwoofer is placed directly in the trunk.
Systematic review
Reiz's second professional modification was completely changed, and the whole set of sound effects was brought to the extreme. I don't want to get off when I'm listening to music in the car, and I'm not allowed to eat and sleep in the car. This also forms a sharp contrast, so all car owners need to have a pair of "eyes" and don't spend money indiscriminately.
Toyota Reiz car audio modification system: audio source decoding: Luchang T820+ Rubik's cube six-way decoder, front sound field: German Conch 3. 16 sets, divided by two, and a set of rear sound field: Steiger SQ650 coaxial amplifier: Italian Steiger four-way amplifier, two bass amplifiers: MTX500. 1 single channel amplifier, and one.
This system is simple and classic. The audio source part is Luchang T820, Luchang T820 European version of the sound quality smart car, and Luchang T820 European version of the sound quality host is specially developed and designed for good voice. It is not only an intelligent navigation host, but also an artifact with a fever sound quality! Support FLAC, APE, WAV, etc. Lossless audio source format, self-contained 32G memory settings, support for expansion, let us have more songs to choose from, and avoid the dilemma of not finding songs because there are too many discs! Built-in DSP decoding supports 360 panoramic view, optical fiber and coaxial signal output, pure digital signal, lossless original audio signal, high-definition driving recorder and ADAS deviation warning system. Luchang T820 host meets all your imaginations about the host!
An Italian Steiger's four-channel amplifier drives the full rear speaker, one four-channel amplifier uses up all the outputs, and the other one drives the subwoofer, and all the six audio decoding outputs are used up, so the flexibility and strength of low frequency are very good. Through Andhadhun's training, the bass in the front sound field and the subwoofer in the trunk are perfectly connected, and the sound potential of Conch 3 series is brought into full play, and all equipment is not wasted. The sound potential and equipment potential are very high.
The sound source of the main engine is smooth during the construction process. T820 European version of the audio quality version of the host, the sound source part is ready, and the rest is the later match. Luchang T820 Euro quality car supports all lossless audio formats, which makes the sound output signal more pure. It's as simple as having a good Luchang T820! After disassembling the door panel, each original car has only one layer of iron sheet, so when driving at high speed, the iron sheet will vibrate and produce noise. Use GT for environmental protection and sound insulation, strengthen sheet metal, and effectively reduce vibration. The door is the main channel for wind noise to transmit to the cab, and the thin metal plate of the door is prone to vibration and vibration noise. At the same time, the weakness of sheet metal and vibration noise will also affect the acoustic effect of the horn on the door. Then the second layer GT is used to seal the redundant holes and gaps in the door sheet metal, which blocks the transmission of external noise to the cab, and at the same time makes the door sheet metal room form a solid box similar to the sound box, which greatly improves the sound effect of the sound box. German conch 3 series speakers are installed in the original position ~! When the owner heard Conch 3 Series in the in-store audition room, he was immediately attracted by the sound and decided to install a set of German Conch 3 Series speakers. Anyone who has heard of it will be moved by its sound style. For many car owners who are not enthusiasts, the sound of conch is nice and comfortable! German conch speakers are all made in Germany, and there is no domestic production line. Therefore, each pair of speakers is exquisitely handmade in Germany, which is one of the reasons why conch is often out of stock! Its output can't keep up with the number of conchs selected by global consumers! Horn installation. Do five installation procedures, sealing, waterproof, stable and safe! A good installation process can minimize the probability of after-sales occurrence. Steiger SQ650 coaxial horn is installed in the rear sound field ~ the rear coaxial horn is green leaves. Steiger four-way power amplifier is installed under the co-pilot ~
Rubik's cube DSP6 and MTX bass amplifier are installed under direct drive ~
Comments: This system looks very simple, without too many fancy technologies, but the structural details are excellent! With good construction details, the sound of the whole system is great! The horn gasket is firmly sealed and fixed, and the medium and low frequency performance of German conch is very full. Even if you upgrade again, there is still room and potential for speakers to be tapped!
Toyota Reiz has a very good sound effect. Whether listening to human voices or listening to pop songs, the sound is very delicate and distinct!
In the modification of car audio, not only should the sound collocation be reasonable, but also the perfection of system collocation and the potential of later upgrade should be considered. Equipment can't be wasted, every step and every possible problem should be checked by the owner! With reasonable equipment collocation, we should also consider the details of construction and installation and the layout of equipment installation! These are also the key! There can be no good sound without good installation!
Debugging is the most critical part of the system. Without good tuning, the potential of the effect cannot be fully exerted! Only by tuning well, accurately grasping the owner's listening style and requirements, not relying so much on the frequency band data of electronic instruments, but having rich tuning knowledge and perceptual knowledge of music connotation, can we get a set of car audio with human feelings, rich colors and good effects! Without rich experience and debugging experience, I think that system is soulless, no matter how expensive the equipment you installed!