How to replace the bearing of the floor spring

1. Remove the floor spring from the vehicle, ensure that the vehicle is in a safe position, and fix it with the support device.

2. Use a suitable tool to remove the original bearing from the floor spring.

3. Clean the installation position of the bearing seat and bearing on the floor spring to ensure that there are no sundries and corrosives.

4. Install the new bearing on the floor spring. Make sure it is installed correctly and press it in or install it in place with a suitable tool.

5. After the installation is completed, ensure that the bearing rotates freely without jamming or abnormal phenomena.

6. Reinstall the floor spring to the vehicle and ensure its installation and fixation.