There are many types of composite materials, including non-metallic materials and metallic materials
The following equipment is generally required:
1. Shearing machine. The size of the composite material may not meet the requirements, and it needs to be cut with a shear. For example, when processing composite steel strips, steel plates are usually purchased in large pieces and need to be cut.
2. Leveling machine, used to level the flatness of composite materials. There will definitely be bends in the material after shearing, including bends during processing, which need to be leveled.
3. Grinding machine. Impurities such as scale or oil need to be removed before the two materials are combined.
4. Oil removal tools. It can be a tank and put alkaline water in it. Generally, metal materials, especially steel, have oil on their surfaces (coolant during metal processing, oil protection at the end, etc.). Other non-ferrous materials may not have oil. This step can be omitted.
5. Induction furnace, sintering furnace, etc. Mainly refers to heating equipment
6. Rolling mill. The most important equipment.
The above equipment can produce composite materials according to the minimum requirements. However, after the materials are produced, relevant testing is required.
Composite materials, the raw materials are generally powders. The composition, particle size (particle size distribution), and particle shape of the powder need to be detected
The size of the material needs to be detected in the intermediate process
After the finished product, not only the size needs to be detected, but the composition, composition, and Gold equals. For particularly important products, mechanical performance testing may also be required, such as hardness, fatigue strength, bending, elongation (generally determined by the base material), bonding fastness, uniformity of composite materials, etc.