Qiansi board can be used for the construction of ventilated curtain wall. The high performance of the board helps to ensure that the building can resist wind and rain erosion and is in a dry and good heat insulation state. In this way, a comfortable and healthy working and living environment has been created. Because there is a certain space between the covering layer of the ventilation facade and the external wall, it creates excellent conditions for adding thermal insulation materials. The natural flow of air in the cavity can remove rainwater and condensed water, which just ensures that the thermal insulation material is in a good state, and its thermal insulation effect is still excellent with the passage of time.
It is suggested that the minimum depth of the continuous ventilation hole is 2mm, and its optimum depth is 4mm. When the height of the facade covering layer exceeds 1 meter, the relationship between the vent and the length of the rainproof layer should be at least 5 square centimeters per meter; When the height of the facade covering layer is less than 1 meter, the relationship between the vent and the length of the waterproof layer should be at least 2 square centimeters per meter. Trespa Virtuon is a durable board with an unusually smooth and impermeable surface. It is very convenient to clean Trespa Virtuon, especially suitable for health care, public buildings, transportation terminals and retail stores, and for surfaces with strict hygiene requirements.
Trespa Virtuon board is manufactured by patented electron beam curing technology, and the generated surface needs minimal maintenance, which can keep the board free of stains and defects for many years, even in the most challenging environment. In addition, Trespa Virtuon offers a wide range of design possibilities with its wide range of colors, metal finishes and textures.
trespa toplab eco-fiber can perform well in a laboratory environment. It adopts electron beam curing (EBC) technology of Qiansi Board Company, and its surface is dense and non-porous, which can prevent almost all substances in the laboratory from infiltrating: radioactive isotopes, human tissues, blood samples, bacteria, molds or microorganisms.
trespa toplab eco-fiber is waterproof and easy to clean or disinfect. Its surface is treated by EBC technology of Qiansi Board Company, and coated with transparent topcoat, showing a dense and non-porous structure, which can resist the corrosion of many corrosive chemicals.
trespa toplab eco-fiber can withstand the corrosion of many corrosive chemicals. If cleaned within 24 hours, the decorative surface will not leave any traces. The test shows that the plate has 24-hour chemical resistance.
hygiene, cleanliness, chemical resistance and pollution resistance are key requirements. The workbench of the laboratory is easily polluted, so the material selection must be antibacterial, hygienic, easy to clean and maintain, durable and flexible, and must meet international standards. Trespa TopLab PLUS can not only meet the needs of most laboratories, but also has many other advantages, including chemical resistance, wear resistance and water resistance.
Trespa Trespa TopLabPLUS presents a unique porous surface structure. The product combines antimicrobial properties and does not contain any coatings or additives, thus maintaining the activity of the product in the whole service life. Bacteria, molds and other microorganisms cannot breed or infiltrate on the surface. The strain dries quickly on the surface, so the bacteria can't find any nutrient source from the plate. Trespa TopLab PLUS is an ideal material for multifunctional environment. Trespa TopLab PLUS countertops are versatile, with a solid and durable surface, which can still maintain its intact appearance after years of use. When used in flexible environment, Trespa TopLab PLUS enhances the equipment strength of laboratory or lecture hall. Because of its impact resistance, the board is also suitable for mobile furniture, such as the top cover of trolleys.