The fully automatic washer-extractor eliminates the tedious working procedures of ordinary washing machines and dehydrators. You only need to place the laundry in the washer-extractor, set the washing, rinsing and dehydration procedures, and more With the simpler "one-button operation" program, you can wash clothes easily! Used in hotels, restaurants, hospitals and laundry and dyeing industries. The fully automatic washer-extractor is an ideal equipment for washing cotton, wool, linen, chemical fiber and other fabrics. 1. Structural features of semi-automatic large-scale washing machines:
The semi-automatic industrial washing machine adopts the bedroom drum type. The inner and outer drums of the industrial washing machine are made of high-quality stainless steel plates. They are smooth and bright, corrosion-resistant, and have little wear on fabrics. No damage, long service life of the machine. The inner drum door cover of industrial washing machines is equipped with a stainless steel safety locking mechanism, and the outer drum door cover is equipped with an electrical interlocking device, ensuring safe and reliable operation. The industrial washing machine adopts triangle belt transmission, which has small vibration, smooth operation and durability.
2. Structural features of the fully automatic large-scale washing machine:
The fully-automatic large-scale washing machine adopts a full computer LCD human-machine dialogue operation interface, a large Chinese display screen, and 30 different washing programs. Available to choose from, it can meet any washing requirements and fully realize the automation of washing, rinsing, rinsing and other processes. The fully automatic large-scale washing machine adopts an all-stainless steel design, which is beautiful and durable. The radial size of the inner tank is large, which increases the running height of the laundry.
The programmable computer controller of the fully automatic large-scale washing machine adopts fully automatic and backup manual operation modes, a fuzzy operation control system, and a full Chinese operation interface. It is simple and clear, and the washing program can be set at will. There are 5 fully automatic detergent separation containers to fully dissolve the chemical ingredients and work effectively to prevent burning of clothes. It has the functions of steam heating silencer and soap overflow blocking. The fully automatic large washing machine has variable frequency and stepless speed regulation to ensure smooth operation of the machine and saves 30% of electricity compared to traditional two-speed motors. Equipped with dual drainage options to recycle washing water and save water consumption. There is an automatic water temperature control system. It has the functions of steam heating silencer and soap overflow blocking. The washing process, door locks and control safety interlocks ensure safe use. More advanced and more user-friendly than industrial washing machines. The fully automatic large washing machine adopts a suspended vibration-isolating structure, equipped with a spring damping system, and has ultra-low vibration. The fully automatic large washing machine can be safely placed on any floor without the need for a foundation. The fully automatic large-scale washing machine uses an imported frequency conversion system, which has convenient speed adjustment, smooth start-up, low noise, obvious energy-saving effect, and a simple and reliable transmission structure. 1. First, connect the power supply, open the outer drum door and inner drum door of the industrial washing machine, and put the linen evenly into the inner drum. (Note: When placing linen, be sure to place it evenly, and place large pieces of linen Wash separately from small pieces of linen to avoid imbalance in the washing machine and cause large vibrations. The amount of linen put in should not be too much or too little.) Lock the inner cylinder door and close the outer cylinder door.
2. Open the water inlet valve to let in water. When the water reaches the required water level, open the air inlet valve, let the water level reach the set temperature, and then close the air inlet valve. (Note: The water temperature must be controlled when washing linen. Generally, the water temperature should be controlled at 60 to 70 degrees for washing cotton fabrics, and 30 to 40 degrees for washing man-made fibers, silk and other fabrics.)
3 , put in an appropriate amount of washing liquid, turn the washing switch to the inching position, and jog the machine to allow the machine to operate properly.
4. After proper operation, turn the switch to the automatic position, and the industrial washing machine will automatically wash in forward and reverse directions and work in cycles.
5. After the large washing machine has been washed, open the drain valve to drain the sewage.
6. After the sewage is discharged, continue to add clean water and rinse. Generally, rinsing requires 2-3 times.
7. After rinsing, drain the water and stop the machine. If the inner drum door and outer drum door of the industrial washing machine do not correspond at this time, you can also move the door to align it.
8. At this time, turn the switch to "Stop", open the outer and inner cylinder doors, take out the clothes and put them into the dehydrator for dehydration. 1. There is no water in the washing tub of a large washing machine, but the computer board shows that there is water in the water level. At this time, the water cannot enter the washing machine. You need to check whether there is any residue in the water level gauge tube. If there is any, unplug the water pipe first. Drain the water. If the fault is still not eliminated, check whether the water level sensor is damaged. If it is damaged, replace the water level sensor.
2. The water has been put in the large washing machine but it cannot be heated. The indicator light does not light up. You should check the water temperature setting temperature. The water has reached the set temperature. You can set the temperature to a higher point. This way the water can be heated.
3. There is a signal on the computer board of a large washing machine, but a certain execution command does not respond. First, the computer output interface plug-in may be loose. At this time, connect the plug-in. If there is no response, check the output on the computer board. Check whether the fuse is burned out. If so, you can replace the fuse.
4. Large-scale washing machines make a lot of noise and vibrate a lot during washing. First, consider whether the industrial washing machine is placed smoothly. When installing an industrial washing machine, the washing machine should be placed on a level ground, and then check whether the linen is stable. Place them evenly in the washing machine, or check if there are any non-linen items in the washed linens.
5. When a large washing machine is washing, the drum speed is very slow. First check whether the motor is running normally, and then check whether the V-belt pulley is loose or has insufficient toughness, and replace or repair it according to the situation.
6. If a large washing machine suddenly trips during medium-high dehydration, first check whether poor drainage causes current overload. Keep the drainage pipes and sewer channels clear and have a certain gap, and then check the inverter settings. If the acceleration or deceleration time is too short, reinstall the parameters of the inverter to factory default settings.
Large-scale washing machines are constantly running equipment. If they suddenly break down, they will cause direct losses to users. Therefore, Shenda Machinery’s prompt after-sales service is an important factor for customers to choose industrial washing machines. 1. The soap tank needs to be rinsed with hot water frequently to ensure that there are no residues inside the soap tank.
Phenomena: The soap liquid does not enter the outer cylinder smoothly, and the corrosion of the outer cylinder intensifies.
Cause: The accumulation of soap residue is corrosive to a certain extent.
Solution: Rinse the soap tank with hot water to ensure that no residue is left in the soap tank.
Correct operation: After washing every day, rinse the soap tank with hot water.
2. The manual refueling pump should be operated in a standardized manner
Phenomena: The service life of the bearing is short.
Cause: Grease may not have been added and the fuel pump used incorrectly.
Solution: Use 0# lithium-based grease or a mixture of 3# lithium-based grease and engine oil (depending on the equipment). Be sure to press the handle of the gas pump to the bottom every time you refuel. .
Correct operation: According to the product instruction manual, correctly select grease and standardize the use of the gas pump.
3. When washing linen, remember to check whether there are any debris in the linen!
Phenomena: The inner cylinder is scratched, the linen is scratched, etc.
Cause: There is metal foreign matter in the washing machine basket.
Solution: Remove metal foreign objects in the rotating cage.
Correct operation: Before washing linen, be sure to remove any debris contained in the clothes or fishbones, bones and other debris in the tablecloth to avoid unnecessary quality accidents.
4. Machine damage caused by poor drainage.
Phenomena: The washing machine vibrates greatly when it is lifted off, and in severe cases, the inner drum of the washing machine rubs against the door ring.
Cause: There is a problem with the design and installation of the washing machine's drainage pipe, or the pipe drainage is not smooth. It directly affects the machine's uniform distribution and dehydration of clothes.
Solution: Make the washing machine pipe thicker to reduce bends during the installation of the washing machine pipe.
Correct operation: When installing the washing machine, the number of installed elbows should not exceed two; the drainage pipe should not be too long to avoid discounting; when installing, do not put the pressure The balance tube is clogged.
5. Machine accidents caused by too few clothes.
Phenomena: The washing machine is displaced, the door ring is damaged, and in severe cases, the bearing seat, bearings, and sealing rings are damaged.
Reason: The amount of clothes loaded in the washing machine was lower than the minimum standard required for loading clothes, and the staff at the laundry site were off duty.
Solution: Replace bearings and seals, repair washing machine door rings, and train washing machine operators.
Correct operation: The amount of clothes loaded in the washing machine must be strictly in accordance with the regulations. When the washing machine is working, the laundry worker cannot be off duty.