● Energy saving: low energy consumption, and the whole machine saves 50% energy. Resin sand casting bed with high strength and stability.
● Intelligent high frequency makes the operation easier. ● High-pressure filtration water spraying system (optional)
Brand Suzhou Sanguang model HA630
Applicable to the industry general workbench size 785*500
Table travel (X*Y) 400*500 Maximum cutting thickness 500 (mm)
Taper 6 Maximum load 500
Host weight 2000 Host package size1700 *1400 *1500.
The maximum machining speed is 300mm/min, and the maximum machining current is 9Amp.
Surface roughness is 0.06 micron.
1. realizes various cutting functions.
2. Optimum surface roughness Ra 0.6um
3. The maximum machining speed is 300mm2 per minute.
4. Equipped with advanced and unique high-frequency pulse power supply to realize low loss: the loss of machining 10000 square millimeter electrode wire is 0.005 mm..
5. Professional high-quality industrial control computers and international brand devices ensure stable and reliable performance.
6.X/Y adopts imported precision motor, which makes the processing more stable and the cutting accuracy higher for many times.
7. The high-precision ball screw and linear guide realize the pitch compensation function, which greatly improves the positioning accuracy and mechanical follow-up.
8. High-strength and high-stability resin sand castings, and the lathe bed has sufficient rigidity and strength.
9. Patented column movable protection mechanism and new wire diameter waterproof structure can effectively reduce the splashing of working fluid and protect the environment.
10. Su Sanguang designed and manufactured the original team.
detailed information
The center line is also a WEDM machine tool. Its working principle is to use continuously moving molybdenum wire (called electrode wire) as electrode to remove metal and cut workpiece by pulse spark discharge. The quality of the workpiece it processes is between fast wire cutting and wire cutting, so it is called medium wire. Accurately speaking, medium filament is an upgraded product of fast filament, which can be understood as fast filament that can be cut many times, but its processing degree has reached the cutting effect. At this time, the average efficiency is calculated, not the highest efficiency, and the machining quality tends to be linear cutting. The wire feeding speed is automatically controlled by the system and can be adjusted as needed.
It has multiple cutting functions (the working principle is the same as WEDM). In the process of machining, the control system will automatically adjust the machining parameters (pulse width, pulse width, number of power tubes and high-frequency wire feeding speed) according to the programmed program, and at the same time, it can also manually change the machining parameters and make appropriate adjustments.
On the basis of retaining the characteristics of fast WEDM, such as simple structure, low cost, good process effect and less consumption in the use process, WEDM refers to the advanced concept of international precision mould processing equipment and the multi-cutting technology of wire cutting (that is, the first cutting is rough cut at high speed with a large electric gauge, and then the second, third or even fourth and fifth cutting is carried out with a fine gauge and a fine gauge, and the machined surface is gradually polished to obtain ideal quality and quality. This machine is more humanized, more convenient and more applicable than the express line. Therefore, the middle wire cutting has brought a revolution to the mold industry, greatly improving the weakness of the poor quality of the original fast wire cutting and greatly reducing the mold manufacturing cost! Medium speed wire. High speed wire rod price, high quality wire rod cutting!