On the choice:
First of all, you must choose a brand when choosing a car, followed by some patented technologies. In an era of rapid updating and constantly being surpassed. Some small forklifts have been bought for three months, and the connecting frame is broken. When buying a small forklift, you must pay for the gearbox, not the split gearbox.
As for the split gearbox, it is driven by the transmission shaft, which is noisy, vibrates and has high maintenance cost. The advantages of single gearbox are low noise, low vibration and low maintenance cost. Secondly, when choosing this forklift, look at its wheelbase, and then, the width of the tire. Especially depends on the thickness of the cylinder. The thicker the cylinder, the greater its lifting force and the more it shovels.
Because the more oil stored in the cylinder, the greater the force. The cab should be a double-layer stamped steel plate. Look at the shock absorber. Secondly, pins and other vulnerable parts must be made of well-made diamond pins with oil guide grooves and locking oil seals. Ordinary pins are seriously worn in the later period and the maintenance cost is high. Shovel teeth should be forged with manganese steel, so be sure to know clearly before choosing.
The air filter of the engine should be optional, can be used for eight times repeatedly, and automatically alarm for dust removal for 200 hours. Automatic dust removal can effectively protect the early wear of the engine cylinder liner piston, resulting in high fuel consumption and no power for the smoke truck.
Forklift pins must use copper sleeves instead of rubber sleeves, and universal bearings must be used at the joints. It's ok for a copper sleeve to go without butter for a month, and the rubber sleeve will wear out without butter for three days. When the rubber sleeve is worn out, it will be worn out, and a large piece of worn-out car will not be far from scrapping!