1. Ordinary wooden wall decoration
Wood thread is made of wood, which is thinner, corrosion-resistant, wear-resistant, smooth and has good processability. Nails are strong, and then they are dried and processed by mechanical processing. Molded products can be coated with wood grains of various colors to sew and bend several arcs.
2, aluminum alloy wire
Aluminum alloy wire has the characteristics of high strength, wear resistance and corrosion resistance. The color surface treatment after anodic oxidation treatment has clear metallic luster, good light resistance and weather resistance, and the surface is also covered with a strong transparent electrophoretic paint film. Beautiful and abundant.
3, plastic molding
Decorative plastic lines are divided into pressure angle lines, crimping lines and edge sealing lines. Its shape and specifications are the same as those of wood thread, and the method of fixing decorative plastic thread is usually fixed with screws or adhesives.
4, stainless steel line
The stainless steel production line has the characteristics of corrosion resistance, friction resistance, water resistance and good decorative effect. It belongs to high-end decorative materials and is mainly used for pressing lines, closed lines and corner lines of various decorative columns. Second, the installation method.
1. The construction tools of wall decorative strips include: tape measure, square ruler, hand saw, hammer, steel nail, etc. During construction, it is necessary to verify whether the surface of the wall is flat. For irregular surfaces, it must be filled, and the plane error shall not exceed 5 mm.
2. Please pay special attention to the width of the wall lines when bonding them with cylinders. Check the upper and lower flat lines carefully. For rectangular columns, it is considered that there should be no cracks, and the mass is mainly concentrated at the angle of 45 degrees to prevent them from falling.
3. If it is a door or window sill, decorative lines must be strictly prohibited and kept beautiful. Make a base before installation so that the space is not obvious. The wall line of the external wall is used indoors. Pay attention to the detailed construction time. Don't drill or dig walls to keep them clean.
that's all for me. thank you for reading.