Midea Electric Heater ranks first among the top ten brands of electric heaters in China. Midea electric heaters can be widely used in residential buildings, offices, hotels, shopping malls, hospitals, schools, train carriages and other civil and public buildings.
It integrates radiation and convection, and the internal efficient aluminum alloy cooling wing has strong heat dissipation ability and large heat dissipation area. The electric heating film is used as heating material, and its super-large black crystal mirror is fashionable in appearance, which fully meets the harsh requirements of people who pay attention to the beauty of room decoration. It mainly transfers heat through far infrared radiation and thermal convection. The negative ion function can always freshen the air. Power consumption, no constant temperature function. Short life, inconvenient use, and luminous. Children are easy to burn when using it. The kind with rotating function, the rotating part is easy to be damaged by too tight screws.
The maximum heating area of Midea oil heater (square meters): more than 20 square meters (inclusive), and the maximum power of electric heater is more than 2000W, with adjustable three gears and temperature adjustment. Patented V-shaped design, improving heat dissipation area. Color steel printing control panel, beautiful and generous. Rear humidification box, humidification is not dry. The side take-up box is convenient for take-up.
The power supply of electric heater must use qualified three hole socket with grounding wire, otherwise there will be danger of leakage. The electric heater has high power and cannot be used with high-power appliances, electric welding machines and impact drills at the same time, otherwise it will easily damage the electric heater. In addition, the socket should not be located directly above the electric heater to prevent the heat from rising and burning out the power supply. When the room is empty, the electric heater must be unplugged, installed and put away. The electric heater should be placed in an inaccessible place, away from flammable materials, and the back is about 20 cm away from the wall. If you put the electric heater in the bathroom to keep warm, you should be especially careful. Some electric heaters do have waterproof function, but if the power socket is in the bathroom, there are still potential safety hazards. It is best to install the power socket outside the bathroom. The wires of the electric heater should be protected by insulating rubber, and the connection with the body can ensure 100% waterproof.
Oil-filled radiator heater is popular for its large heating area and effective indoor temperature rise. The heating principle and electrical control of this heater are different from other types of heaters, such as halogen heaters and electric ovens. Many consumers will not use it correctly, so the method of use is very important.
The oil-filled radiator heater has no thermostat, and the surface temperature of the heater shell can be adjusted at will (below 1 10℃). During normal operation, the thermostat cannot always be set at the highest grade, otherwise, when the working temperature of the heater surface is close to 1 10℃, the thermostat is not easy to operate, and working at high temperature for a long time will burn out the internal devices or damage the protection. Therefore, when using the oil-filled radiator heater for the first time, the heater should be set in an appropriate position. When adjusting, first turn the thermostat knob clockwise to the maximum position, turn on the two-speed power switch, the whole machine is in the maximum output state, heat for about 5 minutes, and gently pat the upper surface of the shell with the back of your hand. If the temperature is appropriate, turn the knob slightly counterclockwise until there is a crisp contact bounce sound, and at the same time, the power indicator light on the power switch goes out, and then turn it clockwise for a small angle to prevent the contact from closing. After setting the temperature in this way, the heater can provide people with a satisfactory temperature. When the surface of the shell is slightly hot, the temperature is about 85℃. When the temperature of the heater shell is higher than the set temperature, the thermostat will automatically cut off the power supply to stop heating, and the heat stored inside will continue to be released. When the surface temperature drops 15℃, the thermostat contact will automatically close and be electrified to raise the temperature. When the shell temperature is higher than the set temperature, it will automatically turn off the power supply and stop heating. This cycle keeps the temperature constant.
Midea electric heater maintenance address and telephone number:
Anqing jiachang household appliances co., ltd
Tel: 0556-5537709
Maintenance address: Floor 4, Building 2 1 Unit, Ximen, Guang Cai, Anqing.
Huaining county JAC electrics sales co., ltd
Tel: 0556-5 166230
Maintenance address: Zhenghe Road 126, Huaining County, Anqing City, Anhui Province
Haozhou Qiaocheng Yahai Trading Co., Ltd.
Tel: 0558-553323
Maintenance Address: Midea Store of Heping East Road, Qiaocheng District, Bozhou City
Dongzhi county Chaoyang household appliances sales department
Tel: 0566-7 105444
Maintenance address: No.7, Kyocera Road, dongzhi county.
Bian Xiao has provided so many maintenance contact information here, I wonder what else you don't understand? The warranty period stipulated by the state is one year, and that in the United States is six years. Imagine that I can repair your warranty for free for six years. What a pleasant thing it is. Thought of here, don't act quickly to send the broken Midea electric appliance to be repaired. Free, it's better to have a major overhaul to make the household appliances more durable. Tip for Bian Xiao: If the appliance breaks down, it will consume a lot of electricity.