Teach you how to drive a pure electric car.
At present, most electric vehicles have four gears: D, N, P and E(E 1, 2, 3). D is the forward gear, N is the neutral gear, which is used when starting and stopping, P is the parking gear, and E is the energy-saving gear. It is used to move forward like D gear, and can automatically recover energy when braking and slowing down, thus extending the cruising range of electric vehicles by about 20%.
1. Start the vehicle: turn the key to the "ON" position, all the instrument background lights will be on, and the low voltage will be turned on; Then, when the key is turned to the "start" position, the "beep" sound can be heard, and the "beep" sound of the relay in the battery pack can be heard twice. When the battery pack is connected to high voltage, the "Ready" green light is displayed on the instrument panel, and the vehicle enters the driving state.
Note: If an electric car similar to Tesla is not started with a conventional key switch, the car will be electrified as long as the brakes are lightly stepped on. After that, you can go directly, because Tesla does not have a special "handbrake", and hanging the "P" file is equivalent to pulling the handbrake.
2. Put down the handbrake, put the handle of the shift control mechanism in the "D" position, lightly step on the electronic accelerator pedal with your right foot, and the vehicle starts to run.
3. If braking is needed, press the brake pedal with your right foot to complete braking.
4, if you need to accelerate, even right foot, gradually step on the electronic accelerator pedal, the vehicle began to accelerate; If you keep driving at a constant speed, just keep the electronic accelerator pedal at a certain opening.
5. If it is necessary to reverse the car, first turn the handle of the gear shifting control mechanism to the N position, and then turn the handle of the gear shifting control mechanism to the "R" position after the vehicle stops, so that the car can be reversed.
Teach you the power-saving skills of pure electric vehicles.
1. Check the tire pressure regularly to keep the tire pressure level of this vehicle. Both hardware and software will affect power consumption to some extent.
2. Carry out 5S management on the suitcase, and clean up unnecessary sundries and heavy objects in time.
Step on the accelerator and start slowly. When using a car, you must get into the habit of stepping on the accelerator and starting slowly.
4. Under the condition of safe driving, try to keep driving at a medium speed of 60-80 mph.
5. When waiting for the red light, turn the gear to N. ..
6. Try not to turn on the air conditioner when driving in urban areas, and prefer to turn on the air conditioner rather than open the window when driving at high speed.
7. Skillfully use the inertia of the car to slide. When the car is driving, the throttle is completely put away, and it continues to drive by relying on the kinetic energy (inertia force) of the car or the potential energy when going downhill. It must be noted that don't stop when taxiing, and the speed should not exceed 40 mph to ensure driving safety.
8. Step on the brakes skillfully: deal with various situations in advance, use the brakes as little as possible, minimize emergency braking to prevent the wheels from locking and slipping, and adopt predictive braking. When it is expected to slow down or stop, the throttle should be turned off in advance to slow down, and then accelerate after the situation is handled, which is safe and energy-saving.
9. Use E gear correctly to improve cruising range: You need to choose E gear and appropriate recovery strength according to different road conditions to match the driving state of the vehicle. Only in this way can we save electricity better and improve the cruising range. For example, if you want to drive as smoothly as possible on a ring road with relatively flat road conditions, you need to adjust the restoring force to the minimum (E1); When the road conditions are complex and the braking needs to be started frequently, the recovery strength should be adjusted to the maximum (E3) to reduce the braking burden and recover as much kinetic energy as possible.
10, when the vehicle is idle, try to use slow charging to keep the battery fully charged.
Parking problem of new energy vehicles
1, new energy vehicles are afraid of sun exposure, because it will increase the internal pressure of the battery and affect the battery life. If the temperature is too low, it will affect the battery activity, resulting in a decline in cruising range.
2. When the vehicle is not used for a long time, it should be charged to 40%-60% to protect the battery, so that the battery will be in a healthy state when we drive again. The battery of a vehicle parked for a long time is in a state of power loss, which is easy to cause battery damage.
3. In the long-term low-temperature season, try to park the vehicle in the garage with high temperature, or take certain warm and antifreeze measures, such as covering it with warm tarpaulin, to increase the battery activity.