2. Use a Phillips screwdriver (smaller) to remove the four screws on the front bumper of the car.
3. Remove the two screws on the side of the front bumper of the car with a 5 mm diameter Allen wrench.
4. Use a Phillips screwdriver and a 7 mm diameter sleeve to remove the three screws on the right side of the front bumper fascia.
5. Then use a Phillips screwdriver and a 7mm sleeve to remove the three screws of the fender.
6. Open the fender carefully to avoid damaging other parts of the car.
7. Remove the screws at the bottom of the front bumper with a small ratchet wrench, connecting rod and 7mm sleeve, which also requires care.
8. Remove the connecting screws of the fender and bumper with a square screwdriver and a 7mm sleeve. Don't drop the screws, they will be used for installation.
9. Use a large wrench and a10mm sleeve to remove the four bolts behind the headlamp.
10. Carefully remove the plug of headlight assembly (be sure to cut off the power supply).
1 1. Remove the headlights.
12. Remove the screws connecting the mudguards, and finally remove the old mudguards and replace them with new ones.