1. First, you must know the keys on the gear panel
2. Then you must know how to use the keys on the joystick and the direction of the joystick
Change Gear Tutorial
1. When changing gears, look down at the gear lever.
2. Driving in low gear for a long time. Generally speaking, high speed gear is more fuel-efficient than low speed gear. Therefore, you should upshift in time after starting.
3. The clutch cannot be fully depressed when shifting gears, causing gear damage. In addition, it is not advisable to place your feet on the clutch when the clutch is not in use, causing excessive wear of the release bearing.
4. The direction deviates when changing gears.
5. When you cannot change gears at one time, push and pull hard.
6. The gear lever shakes back and forth when it is in neutral. It is easy to cause unnecessary wear of mechanical parts and affect the timing of shifting.
7. Jump ahead and block. When upshifting, it should be done step by step to prevent the car's power from being discontinuous. When downshifting, it can be skipped.
8. The car is not parked and the reverse gear is engaged. It is easy to cause gear damage.
Extended information:
For manual transmission cars, when changing gears, you must keep in mind the principle of "accelerate before upshifting and decelerate before downshifting", and "boom" the accelerator handle before upshifting. Increase the speed of the vehicle first, then "close" the accelerator to reduce the speed of the vehicle before downshifting.
The earliest cars were not equipped with synchronizers, and the "two-foot clutch method" was used when shifting gears. When upshifting, follow the principle of "step on, pick off, step on, and hang up", and quickly step on the two-foot clutch pedal. Easily increase gears.
When downshifting, according to the principle of "step on, pick up, lift, slam, step on, and hang up", step on the clutch with both feet, and blast the oil with one foot after the first clutch, and hold for a while. Then depress the clutch pedal a second time and at the same time shift the gear lever to low gear.
Most of the current manual transmission family cars are equipped with five-speed stepped gear transmissions, usually with synchronizers. The shifting operation is more convenient and the shifting noise is small. According to the correct operation Step by step operation, there is basically no chattering sound.