Zhonghui Design Original Works
Packaging design must fully consider the safety of packaging materials to protect human body, so as to avoid packaging failure due to normal external effects such as transportation, vibration and bearing. For example, the packaging of electrical appliances, instruments and other products must be packed with styrofoam, so as to achieve smooth and slow vibration, so that the electronic components in the machine will not fail because of excessive external force; When using blister packaging, the blister surface should be protected with Sydney paper to prevent scratches; For the surface of products with high smoothness requirements, protective film should be used to protect them (such as glass surface, transparent lens surface, metal surface that is easy to scratch, etc.). ); When designing the packaging of toy products, it is not allowed to associate cartoon patterns with sharp materials such as stapler nails.
Minimum volume principle
In order to save transportation cost and be easy to carry, it is necessary to consider the packaging method and try to use the smallest packaging volume. For example, when packed with blister cards, if stacked in the same direction, the volume is1; If you put it upside down, the total volume may be reduced to 2/3.
The principle of easy installation and carrying
In packaging design, we should not only consider the convenience and smoothness of the operator in packaging and unpacking, but also make it difficult for the operator to operate because of design defects. For example, when using bubble bags for packaging, if the bubble size is the same as the external size of the finished machine, it is difficult to load or take out the finished machine, so the size of 10~20m ~ 20m should be appropriately increased in the design.