1, the exclusive patent of blind line slotting machine: the first in China, filling the market gap, with broad demand and unique absolute market advantage;
2. The blind line slotting machine has a wide range of uses: it is suitable for walls with different materials, such as red bricks, sand bricks, hollow bricks, aerated bricks, cement facing walls, wall columns and so on.
3. The blind wire slotting machine is simple to operate: simple to operate, easy to operate by one person and easy to move; When resting in the middle, just turn off the power supply, and the fuselage can still be safely hung on the wall, without disassembly and assembly, without falling off, which is more worry-free and labor-saving;
4. One-time molding: quickly and automatically slotting for one-time molding, without any auxiliary tools and secondary procedures, and the slotting depth can be controlled at will;
5. Free rotation: different angles can be adjusted, and the appearance is beautiful. According to the required lines, the slot can be rotated at 45 degrees, 180 degrees and 360 degrees, which is convenient to use.
Extended data:
Slotting notice
1. If it is a conduit wall, the embedding diameter is about 1.6 cm, and the grooving depth is not less than 3 cm. As long as this size standard is reached, even if the groove is sealed, the uneven wall surface can be prevented, and the wall paint will not crack because the groove is too shallow.
2. In the process of slotting, pay attention to the transverse slotting of the load-bearing wall should not exceed 100 cm, because doing so is likely to destroy the load-bearing capacity of the whole building, reduce the seismic capacity and lead to wall cracking. If it is an insulation wall, the long transverse groove may cause the insulation layer to fall off as a whole, causing unnecessary accidents. The best angle of wall slotting is vertical slotting.