2. Connect and lay the middle floor layer by layer along the direction of the middle keel. The surface is consistent with the design elevation, located in the center and with straight edges. After passing the test, reinforce from both sides. Both sides of the middle floor are tenon-shaped. During reinforcement, steel nails shall be nailed at both ends and every 400mm in the middle, and driven into the floor, but the floor shall not be damaged, and the nail holes shall be smooth.
Solid wood sports floor
3. Laying other floors along both sides of the central floor at the same time. In the process of laying, the joints of adjacent floors are staggered, and a gap of 0.3-0.5 mm should be left between floors, and it should not be smashed too tightly to prevent damage to the surfaces and edges of floors;
4. When the floor needs to be cut, face down, so that the burr is located on the back and the incision is smooth and tidy;
5, the construction period should be compact, please pay attention to the changes of the external environment, especially to prevent water, steam pollution or hard foreign bodies, oil, flammable and other harmful substances from polluting the floor, and the construction site should be supervised by special personnel;
Installation of sports wood floor
6. After the floor is laid to a certain extent, skirting boards can be laid crosswise. The skirting board is smashed into anti-corrosion wooden bricks with steel nails, the nail head should be smashed into the wood, and the nail holes should be leveled;
7, skirting board should be reasonably high, to ensure uniform exhaust seam, skirting board at the corner of the building should be cut at a 450 angle, the incision should be straight, the joint should be tight, and the height error should meet the design requirements of the drawings. When installing the skirting board, attention should be paid to cleaning up the sundries in the ventilation slot;
8, skirting board installation should pay attention to the interface coordination with related projects;