No.
Tiles should be careful to lock in moisture. After the wall tiles are laid, do not open the windows to speed up the drying. During the tiling process, not only moisture is needed, but more importantly, moisture must be locked in to ensure that the moisture is not lost. After laying the tiles, it is best to sprinkle some water on the laid tiles every day, but avoid splashing water. Keep the ground moist, ideally for 4-6 days.
When cleaning and protecting vitrified tiles on a daily basis, first thoroughly clean all stains on the floor tiles. If there is glue or sticky dirt, use a neutral detergent and a scouring pad to wipe it. To re-wax the vitrified tiles, you must use a wax remover without adding water to the surface. After 10-15 minutes, wet the ground with water to remove the old wax. After cleaning, follow normal waxing steps for maintenance.
Extended information:
When laying ceramic tiles, tile adhesive is very important. You can check whether the powder is uniform. The proportion of high-quality glue is scientific, the mixing is sufficient, and the powder is relatively uniform. After the glue is completed according to the proportion, you still need to add water and stir. At this time, you need to observe its viscosity. If it is a high-quality glue, it will feel like a thick slurry when mixed, because it contains various functional additives that can strengthen the adhesion of the tile glue.
The tile glue used by many workers is used in batches. After paving and scraping for a long time, the difference between good and bad glue will be clearly felt. When low-quality glue is used, the arms will become sore and swollen over time; while high-quality glue fully considers the actual application experience of the product, and the scraping feels smooth and delicate, saving time and effort.
People's Daily Online - How to choose glue for tiling?
People's Daily Online - Please note if you are tiled on the wall? If you fall into these misunderstandings, it will be a waste of decoration