How to maintain the reducer?

In order to ensure the normal operation of the motor reducer, in addition to normal use according to the operating procedures, normal monitoring and maintenance during operation, regular inspections should also be carried out to do a good job in the maintenance of the motor reducer. This can eliminate some faults in time, prevent them and ensure the safe and reliable operation of the motor reducer. The interval of regular maintenance can be determined according to the form of motor reducer and considering the use environment. The contents of regular maintenance are as follows:

① Clean the motor reducer. Remove the dust and sludge outside the motor reducer frame in time. If there is a lot of dust in the environment, it is best to clean it once a day.

(2) Check and clean the motor reducer terminal. Check whether the wiring screws of the junction box are loose and burned.

(3) Check the screws of all fixing parts, including anchor screws, end cover screws and bearing cover screws. Tighten the loose nut.

(4) Check the transmission device, check whether the pulley or coupling is cracked or damaged, and whether the installation is firm; Whether the safety belt and its connecting buckle are in good condition.

⑤ The starting equipment of the motor reducer should also clean up the external dust and dirt in time, wipe the contacts, check whether there are any burn marks on the wiring part, and the grounding wire is in good condition.

⑥ Inspection and maintenance of bearings. After a period of use, clean the bearing and replace the grease or lubricating oil. The cleaning and oil changing time should depend on the working conditions, working environment, cleanliness and lubricant type of the motor reducer. Generally, clean it once every 3-6 months, and then change the grease.