It is hollow and has an opening at the bottom; the rod part includes a plurality of sleeve rods 3 that are nested inside each other. The sleeve rods 3 are hollow inside and open at both ends. The sleeve rods 3 are in the shape of a truncated cone, and the adjacent sleeve rods 3 are The small diameter end and the large diameter end are slidingly connected; the C-shaped clamp ring 4 is stuck between the adjacent sleeve rods 3. The inner wall of the tip 2 and the inner wall of the sleeve rod 3 are both provided with protrusions, and the outer wall of the sleeve rod 3 is provided with an L-shaped groove; the protrusions match the grooves. The protective sleeve 1 is arranged on the outside of the tip 2, and an ultra-light clay layer is provided in the protective sleeve 1. Among them, ultra-light clay 11 is a new type of environmentally friendly process material that is non-toxic, odorless and non-irritating (the product complies with: GB21027-2007; EN-71, ASTM-D4236 and other standards). It belongs to the clay category. Ultra-light clay 11 was first born in Germany and gradually spread throughout Europe, and later spread to mainland China via Japan, South Korea, and Taiwan.
[0020] First assemble the sign body: first connect the tip 2 and the sleeve rod 3 together, and slide the protruding point on the inner wall of the tip 2 into the L-shaped groove of the sleeve rod 3 , complete the socket connection between the tip 2 and the sleeve rod 3, and complete the socket between the sleeve rod 3 and the sleeve rod 3 in the same way, thus forming the sign body.
[0021] Then string the hawthorns and install the protective cover 1: After the hawthorns are penetrated by the tip 2, they are fixed on the sleeve rod 3; after stringing the hawthorns, remove the cover on the opening of the protective cover, Insert the tip 2 into the protective cover 1 to prevent the tip of the tip 2 from hurting people; the ultra-light clay in the protective cover 1 can fix the tip 2 to prevent the tip 2 from being displaced, thereby making the protective cover 1 and The sign body is connected into a whole.
[0022] The eating process: boil the sugar and make it into candied haws. When eating, eat the first hawthorn on the top, then pinch the set rod 3 that needs to be pulled out, rotate it, slide the convex point from the horizontal groove to the corner of the L-shaped groove, and then pull it out to remove the convex part. The point slides out from the vertical groove, and the set rod 3 that needs to be pulled out is separated from the set rod 3 connected with it. At this time, the second hawthorn becomes the top hawthorn. Eat the second hawthorn and follow the same process. The method is to pull out the set rod 3 that holds the second hawthorn, and the third hawthorn will become the top hawthorn. In this way, when one is eaten, pull out the corresponding set rod 3, so that the hawthorn to be eaten is always kept. top.
[0023] The above are only the preferred embodiments of the present utility model. It should be pointed out that for those skilled in the art, without departing from the structure of the present utility model, they can also make Several deformations and improvements should also be regarded as the protection scope of the present utility model, and these will not affect the effect of the utility model implementation and the practicality of the patent.
Sovereignty Item
1. Sugar-coated haws sticks, which are characterized by: including a tip and a stem. The tip is conical, the tip is hollow inside and has an opening at the bottom; the stem includes A plurality of sets of rods are nested in segments. The sets of rods are hollow inside and open at both ends. The sets of rods are in the shape of a truncated cone, and the small diameter end and the large diameter end of adjacent sets of rods are slidingly connected. 2. The candied haws stick according to claim 1, characterized in that: the inner wall of the tip and the inner wall of the sleeve are provided with protrusions, and the outer wall of the sleeve is provided with an L-shaped groove; the protrusions are opposite to the grooves. Cooperate. 3. The candied haws stick according to claim 2, characterized in that: it also includes a protective sleeve placed on the tip; an ultra-light clay layer is provided in the protective sleeve. 4. The candied haws stick according to claim 3, characterized in that: the protective cover is provided with an opening, and the opening is provided with a cover. 5. The candied haws stick according to claim 4, characterized in that: it further includes a C-shaped clamping ring, and the C-shaped clamping ring is clamped at the connection between adjacent sets of rods.
Patent abstract This patent discloses a food skewer, especially a candied haws skewer. The candied haws stick includes a tip and a rod. The tip is conical, and the tip is hollow inside and has an opening at the bottom. The rod includes a set of rods set in several segments. The set rod is hollow inside and has openings at both ends. The set rod is in the shape of a cone. It is in the shape of a truncated cone, and the small diameter end and the large diameter end of the adjacent sleeve rods are slidingly connected. This kind of candied haws skewers can be easily pulled out of the handle while eating, keeping the candied haws on the top of the bamboo skewer, and the handle is smooth and does not hurt people.
IPC classification A23G3/56
Publication number CN205266855
Application number CN201520903423
Inventor Yu Zhipeng
Apply Chongqing Zubasi Agricultural Products Co., Ltd.
Public date: June 1, 2016
Application date: November 13, 2015