The number one wall breaker in China is Joyoung.
Joyang wall breaking machine is a wall breaking product independently developed by Joyoung. Joyoung independently develops the first hand-washable wall breaking machine. It is the first to apply frequency conversion technology to wall breaking machine products and continues to lead the development of the industry. . Joyoung is a participant in the formulation of national wall-breaking standards and has been the sales champion of wall-breaking machines for seven consecutive years. It has 1,000 valid patents for wall breaking machines and 10 valid awards for wall breaking machines.
Joyang uses a variable frequency brushless motor to operate through magnetic drive. The noise of the motor is 8 decibels lower than that of a traditional motor. At the same time, its lifespan is 10 times longer than that of a traditional motor. The motor is guaranteed to be replaced for life. The power of the variable frequency brushless motor is increased by about 100%. , while achieving low noise, it effectively improves the crushing effect. The particle size of soy milk is as low as 97 microns, and the fineness is 4.6 times higher than that of traditional wall breaking machines.
Joyang’s independently developed hand-washing technology allows the wall-breaking machine to automatically enter a three-step cleaning process after pulping is completed. Through three-dimensional washing, high-speed stirring and high-temperature steaming, stubborn residues are removed, which is more efficient than hand washing. clean.
Precautions for using the wall-breaking machine
1. The wall-breaking machine should be placed on a flat and wide tabletop, and should not be close to the edge of the tabletop to prevent the wall-breaking machine from working. Moving or falling due to vibration.
2. Avoid using the wall breaker next to high-temperature equipment, such as a gas stove that is cooking. The working wall breaking machine itself releases a large amount of heat energy. If the temperature nearby is too high, it will not be conducive to the heat dissipation of the motor. In extreme cases, it may cause damage to the motor.
3. The motor of the wall breaking machine has high power, high speed, and high calorific value. Therefore, the working time of the motor should not be too long. It is best not to let the motor rotate continuously for more than 3 minutes. When it needs to be used continuously, it should be allowed to cool down for a few minutes before starting after every 3 minutes of operation.
4. When using the preset mode to make food, if you need to make it multiple times, you should let it cool down for about 15 minutes after each production is completed before letting it work again, which is more conducive to the motor. protection.
5. After cooking is completed, do not touch the bottom of the mixing cup (heating cup) and the heating element. The temperature here is very high and you are likely to be instantly scalded.
Reference for the above content: Baidu Encyclopedia-Joyang Wall Breaker