Lock the floor
Locking floor is a patented technology of Ding Yuxuan floor. The locking tight combination completely overcomes the problems of cracking, warping, bulging and so on when the floor is subjected to external cold, hot, dry and wet changes. In the process of paving, there is no nail, glue and keel at all, and it is directly laid on the ground, saving the height of the room and can be disassembled and used repeatedly. It is economical and practical, and saves the paving cost about 20 yuan compared with the conventional floor.
Lock the floor
Matters needing attention in purchasing lock floor:
, lock the type of floor. The reinforced floor sold in the market can be divided into single lock, three lock and four lock floors according to the different locks. The feature of locking the floor is to prevent the floor joints from cracking. The firmness, stability and durability of the floor lock are mainly determined by the chamfering area and angle of the lock, machining accuracy, toughness of the base material and other factors. As long as the single lock structure is reasonable, it is enough to prevent the floor joints from cracking. The area and angle of chamfering of multiple locks may not reach the ideal index, and this result may be counterproductive. According to geometry and mechanics, the button floor is improved on the basis of the existing multi-lock form of composite floor, and the floor is tight and tight at the joints, which is not easy to come off.
Second, pay attention to the scale of lock floor manufacturers. Locking floor has high requirements on production equipment, processing technology and substrate performance, which can't be produced by small factories in general. Therefore, pay more attention when purchasing, and be careful not to be deceived by counterfeit manufacturers.
Ground maintenance of ship lock
Glue. The main purpose of sticking the lock floor during installation is to prevent moisture. If glue is applied during installation, the joint can be sealed, which plays a preventive role and adds a layer of insurance. Moreover, the locking design specially leaves a glue cavity in the floor where the glue flows and solidifies, which can accurately lock the floor in the design position, reduce the possibility of joint expansion and edge warping, and improve the aesthetics and service life of the floor.
Second, avoid humidity. Maintaining the floor will definitely wipe the floor with a wet mop or rag. There is no problem with the floor surface, but the joints between boards are easy to get water. Of course, it doesn't matter how many times moisture enters, but our floor will take many years. The repeated entry of moisture will inevitably affect the service life of the floor and bring losses to consumers.
The above is Bian Xiao's related content about locking the building, hoping to help everyone. If you want to know more about locking the building, please pay attention.