European and American speakers have been widely respected in the audio industry, with mature technology and rigorous workmanship, less flashy and frivolous, and more persistent pursuit of top quality.
1. If you pursue cost performance and want to buy a real home theater sound system with realistic presence, then I recommend European and American speakers. Because American acoustics is famous for its large dynamic range, great momentum and great strength, it shows vivid and shocking scenes of movies, and the cinema effect is excellent. Brand recommendation Canada Bailey Deng, silent speakers, excellent bass, to meet the needs of home theaters; American JBL, JBL260.5
2. There is also Bel Canto, which is a little more expensive, but it can enjoy a good voice that only European aristocrats can enjoy. The application of exquisitely made and expensive Votais tweeter unit, driven by Tia bass, has clear and refreshing tweeter, clear and shocking midrange bass and strong resolution, which is by no means comparable to ordinary speakers. Ten thousand yuan speakers are really second to none.
3. Just choose BenQ, the projector is generally medium, and Sony's projector is high-end. Curtains are generally 120 inch.
Connection between sound card and power amplifier:
1. First, connect the optical fiber output port on the back of the sound card with the optical fiber input port on the power amplifier.
2. Next, confirm that there are two options in the advanced control in the sound card control panel that are off (that is, not orange), one is virtual multi-channel and the other is sound stage effect on. These two options are specially set for two-channel speakers and games, which will have an impact on HD movie playback rather than help.
3. Then there is the key digital output control. Select to turn on digital output, and at the same time select ac3 or pcm automatic selection (48khz) in the sub-column, so that the system will automatically make a correct judgment according to our sound source. The default sample rate system is automatic.
4. Open the audio settings of powerdvd software and select spdif for the speaker environment.
Purchase suggestion:
Be careful when buying, don't blindly listen to the recommendation and introduction of the shopkeeper, and you must not be impatient when buying this kind of thing. You can never buy advanced speakers in a specialty store. It's best to go to some online audio forums first, and then learn some audio knowledge in detail. You can also learn about the actual use of buyers in the past, which is better than listening to the owner's unilateral bluff in the audio store.
Pay tribute to courage, embrace and play with lights, Huawei SoundX202 1 speaker evaluation: 10,000 yuan file technology decentralized
On July 29th, 20021year, Huawei's brand-new speaker "Flamingo" arrived as scheduled, marking the official launch of the third generation of Huawei Sound series smart speakers.
Although it is Huawei's third-generation Sound series smart speakers, Huawei SoundX202 1 reveals that "the same formula is not the same", and the same formula naturally cooperates with Divare again. Huawei is a subversive in the field of science and technology, and Divare is a revolutionary in the field of audio. The combination of the two will change users' traditional cognition of sound and connect audio with people's emotions through intelligence. Different "tastes" are because
Huawei SoundX202 1 has adopted a brand-new design language in the industrial design of smart speakers. From the elegant design of the first two generations, more fashionable and youthful elements have been integrated, and the classics have not been forgotten, which has opened a new journey of "colorful" and full of "boldness"; The acoustic architecture directly pierces the ceiling of the thousand yuan audio, and has a three-band architecture and active frequency division technology for the high-end audio of ten thousand yuan. The software is directly equipped with HarmonyOS2 system, which makes Huawei's first HarmonyOS2 smart speaker worthy of the name.
From the release at the end of July to the experience of going to offline stores many times, I struggled for more than three months, but I still couldn't resist the temptation. During the Double Eleven period, we finally started this brand-new "Flamingo" Huawei SoundX202 1 smart speaker. In this way, I didn't extend the deadline, from SoundX at 19 to Sound last year, and SoundX202 at the beginning1.
Many people may think that packaging is only the last link in product design. After the product comes out, we can find a packaging designer and put clothes on the product. This layer of "clothes" is in the hands of consumers and will be thrown into the trash can immediately in most cases. But as the greatest technology company in the world, Apple doesn't think so, but attaches great importance to it.
As an admirable technology company in China, Huawei has not paid attention to the packaging details of Apple, but fortunately, I saw some clues in the packaging of Huawei SoundX202 1 smart speakers and began to pay attention to humanized design, which these online experience stores can't feel.
If customizing corrugated paper packaging is a routine operation, in order to facilitate users to take out Huawei SoundX202 1 from the transportation packaging safely and efficiently, a paper "belt" is added to the product packaging, and the product can be taken out completely by gently lifting the "belt".
In order to increase the transportation portability of the products, a handle is added at the top of the package of Huawei SoundX202 1 so as not to "hold" the products. The handle is not only used for short-distance transportation, but also has a power-assisted design when unpacking, which can quickly take out the upper protective layer of the product (the handle and the upper protective material are designed as a whole).
I thought the packaging details were all over, and when I opened it, I found that the dust bag inside was also optimized. The dust bag of Huawei's previous products was sealed with adhesive tape, but it was designed into a "handle" shape on Huawei SoundX202 1 to facilitate the removal of SoundX202 1 fuselage. From transportation packaging to dust bag, Huawei SoundX202 1 smart speaker is unpacked in one go, and you can personally feel the contribution of PackagingDesignEngineer in this process.
Back to the packaging itself, Huawei SoundX202 1 smart speakers can't be said to be exactly the same as Huawei Sound in packaging design, but they are very similar. It is still a cubic cylinder made of hard paper shell, and the color scheme is still dominated by white and red. The center of the front is printed with a rendering of the product (UV highlight processing is cancelled). Three main functions are marked on the upper part of the front: magic color light portable, Divare 8 unit three-frequency division and distributed sound system. The bottom is marked with Huawei HarmonyOS system, indicating that it is equipped with HarmonyOS system.
The information on the back and side of the package is simple, with Bluetooth and Hi-resAudio certification marks on the back and product labels on the side. Therefore, the specific model of Huawei SoundX202 1 is FLMG- 10, and there is only one color scheme of Star Black at present.
At the bottom of the speaker is an accessory box, which contains a power adapter, an anti-static wiping cloth, a paper manual and a three-guarantee certificate.
The shape of the power adapter is square, and the color matching is the same as that of the speaker, all in black. The specific model of the power adapter is HW-24027 1C00, the output specification is 24V/2.7 1A, and the rated output power is 65w, which means that this power adapter is completely consistent with Huawei SoundX. The length of the power cord is about 1.5m, and the wire is thick and elastic, which is absolutely enough for daily use. At the end of the power cord is a 6.3mm round DC connector.
When you meet for the first time, you will find that Huawei SoundX202 1 Smart Speaker is familiar with SoundX, but after you get started, you will find many changes in details. The first thing is the size of the circle. Huawei SoundX202 1 has a diameter of 175.6mm, a height of about 224mm and a weight of 3140g. In contrast, Huawei SoundX is only φ 165x203mm and weighs 2.2Kg.
Structurally, Huawei SoundX202 1 is also divided into the upper part and the lower part. The upper part is a glittering and translucent gradual translucent body, which has a strong contrast between transparency and shocking sound effects, bringing a more scientific and flexible audio-visual experience for user interaction; The lower part is changed from the original high-gloss fiber mesh material to a 360 all-metal sound hole, and the industry's first 3D curved surface seamless process is adopted, so that the upper and lower parts are perfectly integrated.
According to the official statement, Huawei SoundX202 1 smart speakers are inspired by electron tubes, which is the mark of an era. Courage machine has its unique "bold taste", which can emit warmer and more natural Sound, and Huawei Sound stands for intelligence, so Huawei SoundX202 1 smart speaker is a combination of "intelligence" and "classic", which is a kind of review.
In addition to the sleek body design, the iconic passive radiator of Huawei Sound series still remains. The exposed surfaces of two symmetrical open bass units are made of concentric metal wire drawing process with Divare LOGO printed on them. It still looks so difficult.
In terms of details, there is also an "NFC" sign near the top. There is the word "Huawei" on the front of the junction of translucent glass and 360 all-metal sound hole.
An auxin socket is added near the bottom of the back, which can be connected to the playback device through a 3.5mm cable. When not in use, use a silica gel pad to block it, which can play a dustproof role. When in use, just pull down the silica gel pad.
The bottom of the stereo is a large area of silicone pad, the DC power interface is located in the center of the bottom, and a wiring slot is reserved on the base.
The whole interactive area is also arranged above the sound, with a circular touch panel in the middle. The panel area contains four buttons: volume increase and decrease, mute and menu, which is convenient for night operation. The four buttons have their own white backlight, and the color atmosphere lights on Huawei Sound did not extend to Huawei SoundX202 1 smart speakers, because SoundX202 1 played the role of "playing with lights" to the extreme.
A circle of LED lights (surrounded by 48 full-color LED lights in 360 degrees) is placed in the translucent glass fuselage at the upper part of the fuselage, which can not only dance with music, but also play the role of indicator light. When adjusting the volume, the length of the light strip will be used to indicate the volume. This design is very interesting.
The successful joining of LED lights has integrated music and lighting, created the scientific aesthetics of light, created the artistic aesthetic feeling of light, and sublimated the spatial expression of light. Breaking the boundary between sound and color, conveying color with sound and feeling sound with color can bring consumers a feast of vision and hearing.
At present, Huawei SoundX202 1 smart speakers support eight lighting effects, namely, color carousel, snow white, rock red, punk purple, electronic green, classical orange, blues blue and folk yellow, and each lighting effect can realize light and shadow following the music rhythm.
In addition to the light moving with the sound, Huawei also upgraded the intelligent lighting effect for SoundX202 1, which has different interactive lighting effects in different scenes, such as sound transmission, sound field modeling, voice interaction, intelligent sleep assistance and so on. The anthropomorphic response greatly enhances the sense of human-computer interaction and increases an emotional interaction between people and speakers.
SoundX202 1 can also be used as wallpaper, without any operation, and the wallpaper style can be selected according to the home style. Five choices: aurora, candlelight, Populus euphratica, dream and beach, make sound an ornament of home environment.
For friends who have difficulty sleeping, you can also turn on the sleep mode. At this time, the speaker lights up light pink sleeping wallpaper and white noise at the same time.
In order to help you better understand, let's briefly talk about the concepts of "three-frequency division architecture" and "active frequency division technology". We call the "tri-band architecture" stereo "tri-band speaker". Frankly speaking, it is a sound box with at least three pronunciation units, including a treble unit, a midrange unit and a bass unit.
Because it is impossible for a speaker to take into account the ultra-wideband of 20~20kHz or even 40kHz at the same time, because the bass speaker needs a heavier and larger stroke, while the tweeter needs a lighter and smaller stroke. Tri-frequency division means that three speakers do their own jobs, and each speaker works at a specific tri-frequency division to obtain the best performance, so as to obtain a wider frequency range, higher sound pressure level, less distortion and flatter frequency response of the speaker as a whole.
Wider frequency response: lower low-frequency spread, better clarity, richer sense of quantity, lower distortion and better dynamic recovery; The ductility of high frequency is better, especially in the part above 20kHz. Compared with the frequency division by two, the sound pressure is more stable, the attenuation is slower and the sense of quantity is richer.
Lower distortion: High, medium and low-pitched units perform their respective duties and work in their respective optimal frequency regions, with lower distortion, more restored details and sufficient information, which are the necessary qualities of advanced speakers.
Wider scope of application: Tri-band speakers have better information (wider bandwidth) and larger dynamic margin (full-band speakers need to take into account the performance of low, medium and high frequency bands, resulting in lower sound pressure level, and tri-band speakers can do their own jobs, and the sound pressure level can be designed to be higher within a specific frequency response range), so they can adapt to more music types. It can not only provide the symphony orchestra with low distortion under great pressure, but also give a more realistic description of bass drum, bassoon, cello and organ.
Go back to Huawei SoundX202 1 smart speaker and see how it is made. Huawei SoundX202 1 Smart Speaker has four 5W midrange speakers, 1 50W subwoofer, 1 3W tweeter and 1 passive radiator. The previous generation SoundX only had two woofers and six full-range speakers.
1 50W subwoofer (4.75 "): 38hz ultra-low dive, high fidelity, extremely low frequency. 4.75-inch large-size high-power woofer, peak power 100W, 1.25 "large-caliber pure copper voice coil, 90mm large-size magnetic steel. Have super explosive power. 50W peak bass power (HomePod peak bass power 30W) is enough for the whole house to hear surging and shocking music.
Four 5W midrange units (1.5 "): independent midrange units, regardless of high frequency, with longer horn stroke, 1.5", covering the frequency range of 20~20kHz, with the peak power of a single horn up to 10W, sensitivity up to 8 1dB and sound pressure. Made of 0.75 "NdFeB rare earth magnetic steel and voice coil. The midrange is more accurate, especially at relatively low frequencies in the midrange, and the sense of quantity is more sufficient. The typical scene is that the voice is clearer.
1 3W tweeter (1.25 "): 0.1mm ultra-thin, ultra-light and high-damping nano-scale silk membrane dome diaphragm (the silk membrane material is only used for ten thousand-level speakers, and the high damping is to make the frequency response curve straighter, reduce the peak and valley of the curve and reduce the distortion caused by the vibration of the sound membrane), and 0.75 inch NdFeB rare earth magnetic steel.
Two passive radiators: push-push acoustic structure design, two passive radiators are embedded in the transparent cavity shell to realize zero vibration of the cavity and purer sound quality. The stroke can reach 25mm, the low frequency effect is improved by 5dB, the good sound is visible, and the bass is more shocking.
Let's talk about "active frequency division technology" first. Generally speaking, all frequency dividers are passive and no frequency divider is active. Active frequency division means that the audio signal of the host computer is divided in the CPU signal processor before being amplified by the power amplifier circuit. The principle is that the audio signal is sent to the CPU signal processor, and the audio signal is divided into low frequency, intermediate frequency and high frequency signals in the CPU signal processor according to the frequency response range, and then the separated three signals are input to the amplification circuit for amplification respectively.
The advantages of active frequency division are independent frequency cutoff (the frequency division point is adjusted independently, so that the speakers can sound in a smooth frequency range), independent delay (the sound emitted by each speaker reaches people's ears at different times, and the sound phases of the middle, high and low frequency speakers are different due to different positions, and the adjustment of each independent channel makes the sound positioning more accurate), independent gain (even speakers with large sensitivity differences can be well matched), and no frequency divider (the power amplifier directly reaches the speakers, reducing the cost).
Huawei SoundX202 1 Smart Speaker is an active crossover speaker.
In addition to the "three-band architecture" and "active frequency division technology", Huawei SoundX202 1 smart speakers continue to adopt the upgraded version of DIVARE patented signal processing technology. SAM2.0 technology is the only patented signal processing technology that can simultaneously control the precise displacement of the woofer and passive unit. It controls the bass unit by modeling the bass unit and the passive unit, and then controls the state of air vibration in the acoustic cavity, and then accurately controls the diaphragm displacement of the passive unit. In the style of training, it is naturally Valle's training.
There is one thing that is most easily overlooked. In fact, the Bluetooth audio coding of Huawei SoundX202 1 smart speakers has been upgraded from SBC/AAC standard definition transmission to LDAC high definition transmission and Huawei's self-developed L2HC high definition transmission, which can stream high-resolution music at a speed of 96KHz/24bit, with a maximum speed of 990kbps. You know, LDAC used to be Sony's exclusive technology, which can transmit about 3 times the data of ordinary Bluetooth.
Because it is a 360-speaker configuration, Huawei also brings the ability of "smart space perception". Huawei SoundX202 1 will play a short test audio to check the structure of the room. The sound field model of virtual space is established through intelligent space perception to avoid the loss of high, medium and low frequencies caused by wall reflection.
As a high-end smart speaker, I should have used professional equipment to show the actual sound quality of Huawei SoundX202 1 smart speaker, but I don't have such professional equipment in my hand, at most, the sound quality is a subjective feeling, so I will briefly talk about my personal views on the sound quality of Huawei SoundX202 1 smart speaker here. At the same time, if you are interested in Huawei SoundX202 1 smart speakers, it is strongly recommended that you only watch online reviews. Even video reviews are of little reference value. It is most reliable to go to the offline store and actually listen to it (it is best to find a quiet store or time).
When I got Huawei SoundX202 1, I was most interested in the bass part, and "drum poetry" became a necessity for reviewing the sound series. Although I have listened to it many times, every time the drums sound, I am full of energy. The vibration and generosity of the drums come to you like a huge wave, prompting your auditory nerve; When the hybridization between the middle drum and the middle drum is wrong, the advantages of middle and low frequency can also be reflected, and the sound is patchy and tense. Drumming from fast to slow, and then from slow to fast, the transition is smooth and natural. The whole "Drum Poetry" will make you feel like you are on the stage, with a strong sense of space, and you can fully feel the surging and magnificent drums.
In order to take care of more people's feelings, the APP side of Huawei SoundX202 1 can also adjust the bass to a certain extent. At present, it can be adjusted by plus or minus 6dB. Friends who like bass can be strengthened, and friends who don't like bass can be weakened. In fact, in addition to bass adjustment, Huawei also provides four sound effects for SoundX202 1, namely HiFi live, Extreme Voice, Divare Pro-listening and Virtual Sound Field Mode, which you can choose according to your personal preference.
The sound quality of Huawei SoundX202 1 smart speakers is not all low frequency. When listening to a classic track with extremely high requirements for sound quality, Huawei SoundX can restore the sound to a great extent, which is true and pure, with obvious high-low frequency division effect and a sense of hierarchy. Guitar playing, bass and other instruments slowly entered the stadium. Huawei SoundX retains the transparency and layering of treble. The treble seems to be floating in the air, the vocal depiction is extremely delicate, the details are full and elastic, and even the subtle tapping in the soundtrack has obvious feelings. Musical instruments and vocals are well-defined and not chaotic.
Of course, Huawei SoundX202 1 smart speakers can also be combined with stereo to achieve a better listening experience. Unfortunately, at present, I only have a Huawei SoundX202 1 smart speaker, so I can't enjoy this "fairy-like" experience for the time being.
As the first smart speaker equipped with HarmonyOS system, the biggest advantage of Huawei SoundX202 1 is ecological linkage, which can realize the interconnection with Huawei mobile phone tablet, Hi-Link smart home and Huawei smart screen. Close to the mobile phone, you can pop up the card globally and complete the distribution network in one stop. You can also drag the card to realize seamless audio flow between multiple devices.
For example, we pull down the mobile phone interface and select the super terminal in the control center. When you are in the living room, drag the speaker icon in the living room to connect with the mobile phone, and you can play it. When you go to the study, drag and drop the speaker icon of the study to connect the mobile phone, and the speaker audio of the living room will be switched to the speaker of the study for continuous playback, seamlessly and smoothly. However, it is a pity that there is no Huawei mobile phone equipment in hand at present, and it is impossible to demonstrate it for everyone on the spot.
Among them, what envies people is the combination of big screen and speaker. When the smart screen is connected with Huawei SoundX202 1 smart speakers, the smart screen has various audio units of low, medium and high frequencies, but limited by its thickness and physical width, its ability to play bass and surround effects is limited. Smart speakers have better bass units, support more flexible placement, and can build a distributed sound system with distributed capabilities, so that each device can learn from each other and easily build a sound system comparable to a home theater.
From the positioning point of view, Huawei SoundX202 1 smart speaker is still a smart speaker after all, so it is similar to Huawei AI Audio and Huawei SoundX in function. Needless to say, listening to songs, or cooperate with Cool Dog, one of the big-name music players in China. Cool Dog has 20 million+music library and 200,000+Hi-Res high-resolution songs, so you don't have to worry about the music library.
In terms of pickup, Huawei SoundX202 1 smart speaker continues the previous 6MIC design, and the pickup radius can reach 5 meters, but this time, the six pickup MICs are hidden in the groove at the top, and the appearance is more concise. The actual experience, whether in a long distance or when the audio itself is playing at a high volume, a phrase of "little art" can wake up the audio in real time, and the wake-up rate has reached over 98%.
Like other AI speakers, Huawei AI speakers also have many tips, some of which are provided by Huawei officials, but more are functions provided by third-party developers. Skills can be divided into five categories: children, tools, life, entertainment and knowledge. Rich skills can basically meet our needs.
Huawei SoundX202 1 Smart Speaker is actually the entrance of voice control in Huawei smart home. Huawei SoundX202 1 Smart Speaker Based on the smart home interconnection platform "HiLink" developed by Huawei, electronic devices connected to the platform can communicate in the "official language" to realize full information transmission and * * * enjoyment. At present, Huawei HiLink Smart Home Open Internet Platform has more than 150 smart brands, involving more than 400 smart terminal products. Smart home devices supporting voice control cover all aspects of family scenes, and smart homes can rely on "mouth".
Take Huawei router A2 as an example. At present, my home is connected to the Internet. You can use SoundX202 1 to control various functions such as route restart, signal strength setting and route optimization. I believe I don't need to spend too many words to describe the experience of smart speakers. Everyone is already quite familiar with it.
As an output device, Huawei SoundX202 1 smart speaker is as perfect as possible in connection mode, and supports Bluetooth 5.0, audio broadcast control center, DLNA, Qplay, 3.5mmAUX-in and other connection modes.
"Little Color Change": SoundX202 1 When playing music, you can switch different colors by tapping the center of the dome with your fingers, and switch lighting effects between your fingers;
The audio broadcast control center is an audio control center independently developed by Huawei, similar to Apple's AirPlay. Audio images on Huawei mobile phones and other devices can be transmitted to devices that support continuous playback, such as smart speakers. Drop-down menu at the top of Huawei's mobile phone and click on the speaker, which can realize the transmission of any high-definition lossless audio files on the mobile phone.
The highly respected touch and gesture functions in Huawei Sound series have not only been continued but also expanded in Huawei SoundX202 1. Needless to say, the function of "covering the top of the stereo with your palm" can enter the mute mode in any state (the principle is that your palm covers any three top buttons at the same time), and you can cancel the mute mode by doing the same operation again.
The reason why this function is liked by everyone is actually like the physical volume switch button on the iPhone. Under special circumstances, the efficiency of key pressing is much higher than that of voice, while the efficiency of gesture operation is higher than that of key pressing, and the description may be pale. Only when you really meet a guest at home or need to stop the sound in an emergency can you feel the magic of "one cover is silent"
"Mute a cover" is a gesture in the sound field, so Huawei SoundX202 1 naturally brings two gesture operations: "A little color change" and "double-click to turn off the light".
"Little Color Change": SoundX202 1 When playing music, you can switch different colors by tapping the center of the dome with your fingers, and switch lighting effects between your fingers;
"Double-click to turn off the light": When we want to turn off the light, just press the body lightly to turn off the light, and then press it again to turn on the light.
The touch function naturally realizes the Bluetooth connection between the mobile phone and the speaker through NFC on the top of the speaker. After normal connection, the music played by the mobile phone can be directly transmitted to the speaker with a touch, and the connection is extremely simple. As mentioned above, Huawei SoundX202 1 Bluetooth audio coding already supports LDAC HD transmission. If you have a Huawei mobile phone with EMUI 1 1.0, you can not only transfer the music of the mobile phone to Huawei Sound, but also view the music lyrics being played by the speaker in the form of a pop-up window by touching it on the mobile phone.
As the latest flagship speaker of Huawei, Huawei SoundX202 1 is not only the best product in Huawei AI speakers, but also the best product in the whole field of AI speakers. In my opinion, the success of Huawei SoundX202 1 is a better choice.
In acoustics, we dare to combine learning with strength, directly cooperate with the global TOP3 professional audio brand manufacturers to make up for their shortcomings in acoustics, and at the same time, we dare to use materials by using our own resources integration and technology research and development strength, and directly entrust the "three-frequency division architecture" and "active frequency division technology" in acoustics to Huawei SoundX202 1.
Huawei's own advantage lies in understanding young people's preferences and ecological capabilities, so we can see that Huawei SoundX202 1 has added fashion elements such as neon effect, and at the same time, it has integrated intelligence into high-end audio, which has solved the "segmentation" of smart speaker industry and HiFi speaker industry, and combined the innovation of audio technology with cutting-edge technology.
What are the good recommendations for ten thousand yuan active monitor speakers?
Hivi X6 monitor speaker, a well-known domestic brand, with a price of 9000 and frequency response:
38hz-20k Hz(+/-3db)
Bass is 38 Hz ultra-bass, the bass of floor speakers.
From bass to treble, the frequency response error is only +/-3, and the resolution is high, which is the HiFi sound quality.
Dana monitor speaker, plus this parameter, the price is more than 10 thousand yuan.
How to match the entry-level hifi fever audio from 10 thousand yuan?
To be honest, I never thought there was any entry-level classification of audio.
The sound system is more complicated. In the final analysis, it belongs to the acoustic category. Good sound playback can't be achieved by a set of expensive equipment. Sound playback has a great relationship with the listening environment. In fact, we can understand it as the listening environment of large speakers, so all the means to improve the effect of speakers are effective for the adjustment of rooms. Unfortunately, most people ignore this most important link. Blind pursuit of high-priced equipment. The result is that the more you listen, the less interesting it becomes. Finally, everyone went to play with headphones.
It is also very important that listening to music is a very personal thing. The so-called configuration recommended by experts may not be suitable for everyone. For example, this device plays pop music very well, but you have a soft spot for classical music. At this point, how to evaluate this set of equipment? Some people feel great in the car, so no matter how high-end equipment can satisfy them.
So, to sum up, I always don't think equipment is the most important. It is not difficult to buy good equipment now. The difficulty lies in personal cultivation, hobbies and scientific listening environment. These software and hardware are not in place, even if I heard of millions of devices.
First of all, sound is used to enjoy the beauty of music, not to "have a fever". Any sound can only be as close as possible to the original sound of music, paying attention to the original sound rather than the live sound, because this "live sound" is not unique, and the environment, even in the same concert hall, will not guarantee that the listening environment is 100% the same, and the musicians cannot be the same every time, so try to be as close as possible to the live sound, that is, the music played during recording.
Secondly, although people's hearing is mostly the same, the aesthetic enjoyment brought by music varies from person to person, because the overtones in sound waves are different, that is, the details of listening are different. Therefore, the pursuit of the ultimate restoration of sound to music sound can only bring psychological comfort to listeners, and the improvement of listening sense is not worth spending money and energy.
Thirdly, fever audio is a niche, high-end luxury consumer goods, and the equipment is more likely to eat ash, which can be suitable for _