What is the principle of steam iron?

Turn on the steam switch, the water stored in the steam iron will flow to the high-temperature ironing board, and the water will turn into steam when heated. At this time, steam will be ejected from the hole. Because the holes are left as needed, they can only be sprayed out from the designed holes, which will achieve the purpose of ironing clothes and protecting them from being scalded.

The appearance of steam jet electric iron completely changed the situation of manual water spraying, which not only can automatically adjust the temperature, but also can automatically spray water mist and hot steam to moisten clothes, and achieved good ironing effect. Using this electric iron can not only improve the ironing quality, but also speed up the ironing.

After steam spraying, clothes can not only restore their original elasticity, but also sweaters with loose cuffs can be restored by floating ironing, and even some peculiar smells can be eliminated. Especially suitable for finishing clothes.

When purchasing an ironing machine with extended materials, you can also pay attention to the following points under the same conditions:

1, the larger the ironing board area, the faster the ironing speed: Bell Ryder steam nozzle length 14cm, width 6cm, 9 steam outlets; Haier steam nozzle is 16cm long and 6cm wide, with five steam outlets; Electrolux steam nozzle is 9 cm long and 4 cm wide with 6 steam outlet holes, which is the smallest of the four testing machines.

The ironing panel of Philips electric iron is triangular, the longest is about 20.5cm, and the widest is about 1 1cm. There are 2 1 steam holes at the bottom of the panel. In the actual operation process, the electric iron has the largest contact area with clothes and the fastest ironing speed, and the steam nozzles are Bell Ryder and Haier. Due to the large area of the steam nozzle, the ironing speed is much better than that of Electrolux.

2. The bigger the water tank, the longer the ironing time: among the three ironing machines, Haier's water tank is the largest and Electrolux's is the smallest. If ironing continues, the smaller water tank needs to be added with water repeatedly, while the larger water tank needs to be ironed for a longer time. So it can be concluded that the ironing time is basically proportional to the size of the water tank.

3. The shorter the steaming time, the higher the ironing efficiency: after turning on the power supply, turn the steamer to the maximum. It takes about 40 seconds for Haier and Bell Ryder to steam, while it takes about 2 minutes for Electrolux to steam. In actual ironing, the shorter the steaming time, the shorter the waiting time and the higher the ironing efficiency.

Baidu encyclopedia-iron

People's Network-Ironing Machine Electric Iron Selection on Demand