DY inorganic active wall thermal insulation material is manufactured and prepared by Nanyang dongyuan (DY) technology co., ltd. using natural high-quality thermal insulation materials as aggregate, relying on the rich mineral resources of Funiu mountain in 8 Li, Nanyang, and adopting the international leading inorganic bonding anti-cracking technology.
an energy-saving environmental protection material with various properties such as heat preservation, heat insulation, light weight, fire prevention, cracking resistance and hollowing resistance.
Introduction 1. Good thermal insulation and energy-saving effect "DY" series inorganic active thermal insulation materials, with small thermal conductivity, large thermal storage coefficient and good strength, can achieve better thermal insulation and energy-saving effect when used in wall insulation.
second, fire safety "DY" series thermal insulation materials are non-combustible materials, and their fire safety performance is excellent.
the material is similar to the base material of the wall, which is the most fundamental problem to avoid cracking and hollowing of the wall.
the insulation layer made of p>DY material is firmly bonded to the base wall, and has good anti-hollowing, anti-cracking, anti-wind pressure, anti-impact and weather resistance.
The wall will never be cracked or hollowed out due to high temperature in summer, nor will it be cracked or shed due to stress in winter.
third, the "DY" product with good comfort and environmental protection performance is made of natural, green and high-quality inorganic materials that are nontoxic, harmless and pollution-free. In the process of production, construction and use, it will not pollute the environment, and the insulation layer has certain air permeability. When people live in it, it will not feel stuffy in winter and red baked in summer, and the house will achieve "warm in winter and cool in summer" through thermal insulation.
it is beneficial to the comfort and health of residents.
fourth, the "DY inorganic active wall thermal insulation system" with good water resistance and crack resistance, after years of research and development, has broken through the technical problem that wall thermal insulation materials are easy to seep and crack.
The problem of wall cracking is completely solved. At the same time, after construction, DY thermal insulation material is breathable and impermeable, and its water resistance is quite good, and its bonding strength with the wall is better than the requirements of national standards.
whether it is paint facing or brick facing construction, it can be simple and fast.
5. the construction is simple and fast. the "DY" series products are produced in factories and transported to the construction site in bags.
without anything, just add water and stir it evenly, and you can go directly to the wall for construction, which can achieve the effects of smoothing, whitening, heat preservation and heat insulation at one time. After construction, when the temperature does not exceed 25℃, you don't need to spray water for curing, so you can dry it naturally, saving time, labor and materials. The daily construction amount of workers is half more than that of cement mortar, and the construction period can be reduced by more than half or even two thirds.
the insulation layer is firmly bonded, smooth and natural in color.
process flow: product powder → adding water and stirring → directly plastering → smoothing and finishing. VI. Long service life "DY" product has been subjected to weather resistance test: that is, after 8 cycles of high temperature-drenching water and 3 cycles of heating-freezing, there is no foaming, hollowing and shedding of the facing layer, no water seepage cracks, the impact resistance reaches 1J, and the bonding strength of the facing tile is .61Mpa.
the service life is consistent with the service life of the main structure of the building.
VII. Excellent cost performance The technology of energy-saving building products with "high comfort, low energy consumption, low cost and applicable technology" as the core embodies the international advanced technology development concept.
yintong company has always adhered to the concept of "simplifying complicated things", leaving high-tech content and complicated production technology to itself, and leaving good products that are simple and easy to use and excellent in price to customers' scientific and technological development concept and the highest service realm.
"dy" series thermal insulation materials save 1%-3% compared with other thermal insulation systems in the market, which truly shows that the products are good but not expensive, which is consistent with the international advanced integrated energy-saving concept and is a leading green energy-saving product suitable for China's national conditions and representing the development direction of thermal insulation materials for energy-saving building walls.
market prospect "quantitative energy-saving building technology with high comfort, low energy consumption and low cost" embodies the international advanced integrated design and technology integration concept.
Nanyang dongyuan always adheres to the service concept of "honesty and high efficiency", leaving high-tech content and complex production technology to itself, while leaving customers with good products that are easy to use, good in quality and excellent in price.
At present, the external wall thermal insulation materials in the construction market mainly include polystyrene board, extruded board, rubber powder polystyrene particles, ordinary thermal insulation mortar and many other thermal insulation materials. These materials have good thermal insulation performance, but some of them are expensive, some construction techniques are relatively complicated, and some technical systems still cannot fundamentally solve the problems such as cracks, hollowing and water seepage.
(DY) Otherwise, in addition to the above technical advantages, the inorganic active wall insulation material is active, breathable, comfortable and safe, especially with outstanding water resistance and crack resistance, reasonable price, simple construction and stable quality, and can be directly plastered on the walls of various substrates, which is an alternative product (instead of ordinary cement mortar screed-coat; Instead of anti-crack mortar, etc.) and completely achieve no hollowing and cracking, completely solving the problem of cracking of the wall for many years.
The construction technology is the same as that of ordinary cement mortar plastering, which does not require high level of workers' construction. Before plastering, some walls need to be watered and washed clean, and after plastering, there is no need to sprinkle water for curing, so it can be naturally dried.
save water for construction, facilitate civilized construction, shorten the construction period by more than average, and reduce the construction cost.
therefore, using (DY) or other inorganic active wall insulation materials can greatly reduce the comprehensive cost of the project and improve the comprehensive benefit of the project.
the comprehensive cost is 1%-2% lower than other thermal insulation systems in the market.
This is consistent with the international advanced integrated energy-saving concept, and it is also a leading product that suits the national conditions of China and represents the development direction of energy-saving building wall insulation materials.