What about the poor rigidity and hardness of nylon plastic parts?

The rigidity and hardness of nylon plastic parts are poor. ZH-ZG-6 hardener can be selected to increase the rigidity and hardness of products, and the following methods can be considered: 1. Adding reinforcing agent: Some reinforcing agent or filler can be added to increase the hardness of nylon products. For example, glass fiber, carbon fiber, graphite and silica gel can all be used as reinforcing materials or fillers. These substances can enhance the rigidity and hardness of nylon. 2. Changing the mixing ratio: Changing the mixing ratio of nylon material will also affect its hardness. Increasing the content of nylon or reducing the content of other additives can improve the hardness of nylon products. 3. Heat treatment: Heat treatment is a common method, which can improve the hardness of nylon. By controlling the heating temperature and cooling process of nylon products, the crystal structure and molecular chain arrangement can be adjusted, thus improving the hardness. 4. Compression molding: In the production process, high-pressure compression molding technology can be used to increase the hardness of nylon products. By applying higher pressure, nylon material can become denser, and its hardness and strength can be improved. It should be noted that due to the influence of product design, material type and other factors, the specific methods to increase hardness will be different. In practice, it is recommended to consult a professional material engineer or manufacturer for more accurate advice and guidance.