Adjust the wheel track: firstly, adjust the wheel track to a suitable size, which needs to be adjusted according to the actual situation.
Adjust the pressure: After adjusting the track, it is necessary to adjust the wheel pressure to a suitable size. The pressure directly affects the clamping degree of the machine welding line. If the pressure is too high, it may lead to excessive compression or damage of the wires. If the pressure is too small, the wire may not be processed stably. Therefore, the wheel pressure needs to be adjusted according to the actual situation.
Testing: After adjusting the wheel tightness, it is necessary to test the equipment to check whether the processing effect meets the requirements. Sample wire can be used for testing to check whether the parameters such as twisting quality, terminal crimping quality and wire stripping quality meet the requirements.
It should be noted that when adjusting the wheel tightness of the double-ended terminal machine, it needs to be adjusted according to the parameters of the specific equipment and the operation manual, and it will be continuously optimized in the actual test. At the same time, pay attention to the safety of the equipment before adjustment to ensure that the equipment is in a stopped state and the power supply is disconnected.