Don’t be afraid of high temperatures. There is a new method for Xintianchi - "negative pressure fan + water curtain" ventilation and cooling project, which is referred to as water curtain fan. The factory workshop uses "negative pressure fan + water curtain" ventilation and cooling The project can work in a refreshing environment throughout the hot summer, and factory employees do not have to worry about the air and temperature in the workshop, because the "negative pressure fan + water curtain" ventilation and cooling project can help ventilate and cool the factory workshop. The turbid, stuffy air in the workshop is discharged using a negative pressure fan, while the water curtain filters the fresh air outside the workshop and continuously discharges it into the workshop, creating an air convection cycle in the workshop, with one air being discharged in and the other being discharged. Division of labor and cooperation.
The main function of the negative pressure fan is to discharge the turbid and odorous air in the workshop. Negative pressure fans use the cooling principles of air convection and negative pressure ventilation to naturally inhale fresh air from the door or window opposite the installation site, and quickly force the hot indoor gas out to the outside. Any poor ventilation problems can be improved. Machine, the cooling and ventilation effect can reach 90%-97%. The water curtain uses a 150mm thick evaporative cooling medium CELdek (a honeycomb filter layer of special material, a Swedish high-tech patented product) that can fully exchange heat with water, so the cooling effect can reach the optimal level.
So in this hot weather, the factory needs a new way to prevent high temperatures - water curtain fan ventilation and cooling project pre-heating.