Question 1: Is the bathroom waterproof? What tools and materials are needed? First of all, the bathroom is not only small in area but also has many pipes. At the same time, more than 80% of the water leakage problems are concentrated around the yin and yang corners, pipes, sanitary ware, and floor drains. Therefore, special attention needs to be paid to these areas when doing waterproofing. The kitchen and bathroom waterproof slurry is used The concept of repairing and strengthening key parts first and then waterproofing the entire body is to first use quick-setting repair mortar to carefully and evenly paint the areas prone to water seepage, and then use waterproof slurry to waterproof the entire body. In this way, the special material is used to achieve the best waterproofing effect. Better years and longer lasting.
As for the tools needed for waterproofing, there are generally electric mixers, stiff brushes, scrapers, etc. Although it seems that there are not many tools, it is not recommended for people with no construction experience to do it themselves. Do, because the mixing ratio, coating thickness, height, etc. still need to be paid special attention to.
Question 2: What materials should I buy for waterproofing treatment myself? Roller brush
A leveling bonding layer of about 20mm must be made on the structural layer. The base layer must be flat and the surface must be compacted. Smooth, no sharp edges, no honeycomb pits, no bulging cracks
Yantai Lumeng Waterproofing: Painting
1. Apply the first coat of LM waterproof coating. Before construction, ensure that the construction site is clean and dry, and the waterproof coating must be fully applied without any omissions, and it must be firmly bonded to the base layer without cracks, bubbles, or shedding. The painting height should be consistent and the thickness should meet the product specifications.
2. Apply the second coat of LM waterproof coating. Note that there needs to be a certain time interval between the first and second coats of waterproof paint. The second coat can only be applied after the first coat of paint is dry. The specific time depends on the paint. If the interval is too short, the waterproofing effect will be greatly reduced. 3. Apply a protective layer. In order to prevent subsequent construction from damaging the waterproof layer, a protective layer needs to be laid on the surface of the waterproof coating. The protective layer should completely cover the waterproof layer, without any omissions, and be firmly combined with the base layer, without cracks, bubbles, or shedding.
4. Closed water test. During the closed water test, the water at the highest point on the ground cannot be less than 2 cm, and it must be kept for at least 24 hours. It will be considered qualified only if there is no leakage. If there is leakage, it needs to be redone and must not be neglected.
Question 3: What materials are good for waterproofing? What are the latest rankings of the top ten brands of waterproofing materials? I believe everyone knows that waterproof materials are indispensable materials for our decoration. Generally, waterproof materials are used in roofs, exterior walls and engineering construction. Most people use them in bathrooms, kitchens and balconies for home decoration, because these three places are relatively humid. , so waterproof materials are indispensable. So what materials are good for waterproofing? Here are the top ten brands recommended for your reference.
1. Dongfang Yuhong
Beijing Dongfang Yuhong Waterproof Technology Co., Ltd. was established in March 1998. It has now developed into a company integrating waterproof material research and development, manufacturing, sales and construction. A leading enterprise in China's waterproofing industry that provides integrated services, it is a national high-tech enterprise and the only listed company in China's waterproofing industry (SZ002271). It has the industry's first national-level corporate technology center and postdoctoral research station. The annual output is 80 million square meters of SBS, APP, self-adhesive, polymer and other types of waterproofing membranes, and 100,000 tons of various coatings such as polyurethane series, polyurea series, acrylic series, cement-based series, and asphalt series.
2. Zhuobao
Shenzhen Zhuobao Technology Co., Ltd. is a system supplier mainly producing functional building materials and undertaking decorative insulation and waterproofing projects. It is a national High-tech enterprise. The company has six subsidiaries: Shenzhen Material Factory, Beijing Zhuobao Technology Co., Ltd., Suzhou Zhuobao Technology Co., Ltd., Wuhan Zhuobao Technology Co., Ltd., Hubei Zhuobao Building Energy Saving Technology Co., Ltd., and Chengdu Zhuobao Technology Co., Ltd. It was established on May 6, 2001 and is headquartered in Futian District, Shenzhen.
3. Keshun
Since its establishment in 1996, Keshun Company currently has the joint production capabilities of three major production bases (North China, East China, and South China), as well as southwest production The base, new production base in South China and new production base in East China are under construction. It has multiple imported fully automatic modified asphalt waterproofing membrane, waterproof coating, and drainage protection board production lines, with an annual output of 3,000
waterproofing membranes, 30,000t waterproof coating, and drainage protection board
Production capacity of 5 million. It produces three series of products: "CKS Keshun" brand building waterproofing membranes, building waterproofing coatings, and drainage protection boards. Its APF waterproof membrane and polyurethane waterproof coating have good market performance. For many years, it has been engaged in the production and construction of engineering waterproofing materials as its main business. In recent years, it has launched a sub-brand "Elide" in response to the rapid growth in household waterproofing needs. It has a two-pronged approach to planning projects and home decoration, and has made some gains in some areas. Advantages: The sales volume of self-adhesive membranes is good and the project coverage is wide.
4. Qinglong
One of the earliest enterprises engaged in waterproofing in China, Zhongshan Qinglong Waterproof Reinforcement Engineering Co., Ltd. was established in 1993, and Qinglong Chemical Building Materials (Group) was established in 1997 , is currently one of the largest comprehensive professional manufacturers of chemical building materials in China. It has the country's leading polymer coil production line, advanced waterproof coating production equipment and EVB thermal insulation and fireproof dry powder mortar production line. It is a national high-tech enterprise integrating R&D, design, production, construction and sales in the construction waterproofing industry. Qinglong has six directly affiliated companies and multiple branches, producing and selling eight series of various types of waterproof materials, building reinforcement materials, thermal insulation materials, and more than 60 varieties of chemical building materials. Its products are exported to Australia, Southeast Asia, Hong Kong and other more than 10 countries (regions), long-term strategic partners of world-renowned real estate giants such as Agile, Evergrande, Ocean City, China Shipping, Vanke, Huafa; Guangzhou Metro, Fuzhou Metro, Changsha Metro, Wuhan Metro, Guangzhou-Zhuhai Light Rail, etc. Zong sign project case with good reputation!
5. Degao
Degao
(Guangzhou)
Building Materials Co., Ltd. The earliest enterprise to produce new environmentally friendly home decoration waterproof materials, with stable product quality. After years of accumulation,
JCDecaux Waterproofing’s channels have spread across most cities in China. It has a profound market influence in the home waterproofing industry and maintains a certain leading edge. However, in recent years, it was acquired by the French Lafarge Group (PAREX), a world-famous dry mortar leader. Now it continues to consolidate its home waterproofing market share while vigorously promoting various types of construction dry mortar. Dry mortar stores have appeared in some cities. The main business seems to have deviated, but the current performance of home waterproofing products is still good.
6. Golden Umbrella
Guangxi Golden Umbrella Waterproofing Company covers an area of ??more than 100 acres, with an annual output of 50 million square meters of specialized production lines for reaction adhesive membranes and an annual output of 20,000 tons. Waterproof coating production line, 15-acre garden-style waterproof technical school, passed ISO9001:2008 quality management system certification, ISO14001:2004 environmental management system certification, has the CPS Reactive Adhesive Engineering Technology Research Center awarded by Nanning Science and Technology Bureau, and has won more than 20 A patent...gt;gt;
Question 4: How to make bathroom waterproof and what materials should be used? We cannot choose waterproof membranes for bathroom waterproofing. Only waterproof coating is the most suitable. Among the coatings, two-component acrylic coating is the best (good environmental performance). They are collectively known on the market as: k11 waterproof slurry and JS waterproof coating. Because it adheres firmly to the base layer and has good adhesion to the ceramic tiles, it is the best choice for bathroom waterproofing.
Base surface treatment is the key to waterproof construction. The base surface must be cleaned before construction to ensure that it is solid, flat, clean, and free of dust, grease, wax, release agents, etc. and other debris. If If there are pores, cracks and other defects, they must be repaired and smoothed with cement mortar in advance, and the yin and yang corners should be smoothed into arc shapes. Keep the base surface moist and clear of water.
Secondly, apply evenly and be careful not to miss the brush; thirdly, after 24 hours of construction, it is recommended to cover the coating with a wet cloth or spray water to maintain the coating. Trampling, rain, exposure, and sharp damage must be prohibited before it is completely dry. Especially when installing sanitary ware later, special attention should be paid not to damage the waterproof layer. Finally, after the waterproofing construction is completed, a water closure test must be conducted for 48 hours. The height of the water closure should be increased as much as possible, not less than 20cm. Carefully check whether there are traces of water seepage or water droplets on the ceiling downstairs. Light walls must be subjected to a water spray test, and check the back side. wall.
Recommended brands: Deco and Dongfang Yuhong. Deco does a good job in home decoration. K11 flexible type is more commonly used. You can go to the A-Line Home Building Materials Sale Mall to check it out. Hope this helps.
Question 5: What are the waterproof materials? Where are they suitable for use? Waterproof materials are classified into: synthetic polymer waterproof membrane; waterproof coating; JS polymer cement-based waterproof coating; polymer modified surface membrane; sealing material; waterproofing agent; waterproof mortar; waterproof grouting material; bentonite waterproof material ;My home uses waterproof material from Century Hongyu, which is pretty good.
Hope to adopt
Question 6: What is the waterproof material? That's a lot. It can be roughly divided into asphalt, polymer-modified asphalt, synthetic polymer, inorganic, and polymer cement in terms of material type.
Let me briefly introduce these types to you:
1. Asphalt:
It is a traditional type of waterproof material. Generally, there are asphalt linoleum paper, fiberglass linoleum, and asphalt waterproof coatings.
2. Polymer modified asphalt:
This is a product that emerged in my country after the 1990s. It mainly includes: SBS modified asphalt waterproofing membrane, APP modified asphalt waterproofing membrane It also includes some polymer-modified asphalt coatings (solvent-based and water-emulsion type).
3. Synthetic polymers:
The number of such waterproof materials used has increased year by year since 2000, and has become a new force in waterproof materials. It has superior physical properties and excellent aging resistance, UV resistance, weather resistance, etc.
4. Polymer cement:
This type of waterproof material is commonly used as the waterproof layer of indoor toilets.
The main thing is, JS (polyacrylate waterproof coating).
What is the waterproof material used? It mainly depends on the location of your construction, the local natural environment, design requirements and waterproofing level requirements.
Question 7: What materials are generally used for waterproofing? Waterproofing needs to be done on the facing surface
You can do it yourself by digging the penetration type waterproofing
For cement surfaces Use a super-penetrating waterproof guard for waterproofing (if there are cracks or incomplete gaps and pits on the cement surface, use Medicinal porcelain glue to fill them completely before waterproofing).
For ceramic tile surfaces, first check whether the filling in the gaps between the tiles is complete (if the filling in the gaps between the tiles is incomplete, use Meiding porcelain glue to fill it completely and then use the stone tile type waterproof guard to make it waterproof).
Question 8: Is the bathroom waterproof? What tools and materials are needed? First of all, to make the bathroom waterproof, you must be prepared to select materials. You can choose Yuxiang brand UFW-S one-component polyurethane waterproof coating. Fujian Yuxiang Waterproof Material Technology Co., Ltd. is a building waterproofing system service provider that develops and produces building waterproofing materials and undertakes waterproofing projects!
JS polymer waterproof coating is commonly used in the general market, but this coating is not waterproof for a long time. Because the waterproof layer will show reverse emulsion under long-term water infiltration, causing the waterproof layer to fail. So what materials should be used for bathroom waterproofing? Yuxiang waterproofing experts recommend using one-component polyurethane waterproof coating as the bathroom surface waterproofing. Then use JS polymer waterproof coating to waterproof for more than 30 centimeters, which perfectly solves the problem of anti-milk.
As for the tools needed for waterproofing, they generally include electric mixers, stiff brushes, scrapers, etc.
The materials required are Yuxiang brand one-component polyurethane waterproof coating and Yuxiang brand polyurethane cement-based waterproof coating. Single-component polyurethane is used to make flat surfaces and walls up to 30 cm.
Question 9: When a house is newly renovated, which parts need to be waterproofed? What specific materials are best to use? The kitchen, bathroom and balcony should all be done. The decoration company quoted a price of about 70 yuan per square meter, and the cost was about 55 yuan per square meter. Hope to adopt!