Under the condition of low temperature, the oil (lubricating oil, gasoline and diesel oil) in the oil storage tank is not easy to take out when it freezes. How to realize safe and rapid heating?

WMY series new oil tank quick heater is a new type oil tank quick heater developed by our company in cooperation with Sinopec on the basis of the leading product-WMH series vortex hot film heat exchanger (national patent product, patent number: 02268208.2). It adopts advanced (SUS304) stainless steel vortex hot film tube as heat exchange element, unique heat exchange element and advanced internal process structure, which realizes the functions of high efficiency, corrosion resistance, high temperature resistance, high pressure resistance and anti-scaling, greatly improves the overall performance of the heat exchanger, solves the serious problem of energy waste caused by steam heating oil products in the tank during oil storage and transportation, and plays a positive role in promoting energy conservation and consumption reduction in petrochemical industry. This product has applied for a national patent (patent number: 200720029405.3).

1, high heating speed, high heat transfer efficiency and difficult scaling.

2. Oil can be heated quantitatively as required.

3. The oil will not appear local high temperature and carbonization, which ensures the oil quality and the heat transfer efficiency of the heater.

4. The oil outlet of the oil tank has the highest temperature, which ensures the fluidity of the poured oil.

5. Repeated heating of the oil in the tank is avoided, the chromaticity of the oil is ensured, and the cost of oil treatment is reduced.

6. Long service life, corrosion resistance, high temperature resistance, high pressure resistance and anti-scaling function, which greatly improves the overall performance of the heat exchanger.

7. Advanced process structure design ensures the smooth outflow of oil products and better "bottom pumping" effect.

8. Compact structure, convenient installation and maintenance, and the installation of the heater will not affect the safety of the tank. Compared with U-tube heat exchanger, under the same heat exchange area, the overall size of vortex hot film heat exchanger is only about half of that of U-tube heat exchanger.

9. Automatic control can be realized, and the steam feed rate can be controlled according to the import and export temperature and reverse flow rate of oil products.

Performance parameters:

Tank capacity: 50- 1000m2.

Oil tank diameter: 4.0- 10m.

Flow: 10- 160m3/h

Steam pressure 0.6 MPa

Oil temperature in oil tank: 5℃

Outlet oil temperature: 50℃

Tel: 053 1-825 18550.