There is at least one stapler in every office. It provides us with an ideal means of binding many pages of paper together for preservation. So how to use a stapler? The following is provided by I compiled the content about the use of staplers, I hope you like it!
How to use staplers
1. This machine is used to punch holes in paper and plastic sheets, and use plastic clips to bind loose leaves Binding. This machine is limited to this function, please follow the operating instructions.
2. Before punching the original, remember to try it out on waste paper to confirm that the machine is working properly.
3. Empty waste containers regularly.
4. The upper limit of perforation is 15, please do not exceed.
Detailed instructions are as follows:
1. According to the size of the binding text, select the fixed paper block and binding margin position, and insert the text.
2. After inserting text, press down the handle and lift up the handle.
3. Place the rubber ring behind the comb plate with the opening upward.
4. Push the handle backward and pull open the rubber ring.
5. Put the punched document on the rubber ring.
6. Pull the handle back and the text binding is completed. Advantages of using a stapler
Paper documents and information need to go through three necessary procedures: drafting and compilation, typesetting and editing, and printing and binding. The first two procedures can achieve zero errors in processing through human efforts, while In the binding process, it is difficult to meet the standard requirements by relying only on human experience. Special tools are needed to make the binding uniform and ensure the overall standardization of the writing. The history of staplers
The first person to use a stapler was probably King Louis XV of France. The staples he used were carefully handmade and stamped with the royal emblem, and were used to bind royal documents together.
In 1868, Charles Gould received a British patent for a wire stapler. He used wire as a material, cut the wire into a certain length, pushed the tip of the wire through the paper and folded it off. This is a direct prototype of the modern stapler.
In 1869, Thomas Briggs of Boston, Massachusetts, USA invented a machine that could do this. He founded a company called the Boston Wire Binding Machine Company, which manufactured and sold such machines. His machine broke the wire and bent it into a U shape, then used it to staple through the pages of the book and finally bent it again to secure the book in place. Briggs' original stapler was quite complicated because it had so many steps.
In 1894, he adopted a manufacturing process that first rolled and bent iron wire to make a series of U-shaped staples. The nails can be loaded into a much simpler machine that embeds the nails into paper. This machine was the prototype of today's stapler. Early U-shaped nails were wrapped in paper or loaded individually into staplers.
The use of staplers became increasingly popular in the 1920s, and at that time, U-shaped nails could be glued into a long strip and put on the market. Technical specifications of the stapler
Staple specifications are: 26/6, 24/6(369), 10#, 23/6-2;