Fire box size
Calculated in millimeters, it can be divided into 1, surface mounted single bolt box = 800 * 650 * 240; 2, concealed single bolt box = 800 * 650 *160; 3. Self-rescue box with single bolt =1600 * 700 * 240; 4. Self-rescue box with concealed single bolt =1600 * 700 *160; 5. Surface mounted double bolt box =1000 * 700 * 240; 6. Hidden double bolt box =1000 * 700 *160; 7. Self-help box with double bolts on the surface =1800 * 700 * 240; 8. Concealed double-bolt self-help box = 1800*700* 160. This is just a common phenomenon, not limited to these dimensions.
Fire box price
The price of firebox is around 200 yuan. Fire extinguishers are generally equipped with two extinguishers, two 4KG dry powder extinguishers+fire extinguisher box suit, and the price is 155 yuan, which is very cost-effective. Suggestion of fire box manufacturer
Manufacturer of fire box: Sichuan Di Wei Fire Equipment Manufacturing Co., Ltd.
Sichuan Di Wei is a subsidiary of Hong Kong Di Wei Group, and the first fire fighting enterprise and fire fighting equipment manufacturer opened by Hong Kong Di Wei Group in Chinese mainland. Technically, the most advanced production technology in the world has been introduced; In terms of production facilities, it not only has a large area of modern workshops, but also has a simulation laboratory, striving to produce fire-fighting equipment that meets the highest national indicators; In terms of talents, there are high-tech talents at home and abroad, with nearly 200 employees.
Manufacturer of fire box: Jesuite Company
1906, Jesuit company was founded in Chicago, USA, and has become a world-class international brand. Each fire box is professionally designed, and there is no negligence in the production process. All the fire boxes produced have passed the product inspection and can be put into practical use. The durability and service life of the fire box are also the focus of Jesuits' attention, using the strongest raw materials.
Manufacturer of fire box: Weichuang Fire Safety Group Co., Ltd.
Weichuang Fire Safety Group Co., Ltd. is one of the key enterprises of the national torch plan, and the company is located in Chengdu Industrial Development Zone, Sichuan. Over the years, we have been paying close attention to the development of science and technology, and using science and technology to research and manufacture the best quality fire box. And has obtained a number of patents.
Fire box installation
1. fire hydrant box should meet the design requirements (its materials are wood, iron, aluminum alloy, etc. ), and the plug valve has single outlet, double outlet and double control. The product shall have a manufacturing license and a certificate from the fire department before use.
2. The fire hydrant branch pipe shall be located at the coordinates and elevation position of the plug valve, and fire hydrant box shall be stabilized after approval. Plug valve should be installed after the box is aligned and stabilized. When the plug valve is installed in the box, it should be on the side of opening the door, and it should be flexible after opening the door.
3. fire hydrant box should be installed on a light partition wall with reinforcement measures.
4. After the installation of fire hydrant pipes, the water pressure test shall be carried out according to the pressure specified in the design. In general, the working pressure is below 65438±0.0 MPa, and the test pressure is 65438±0.4 MPa if there is no design requirement. The working pressure is above 1MPa, the pressure test pressure is 0.4MPa, and the pressure is stabilized for 30 minutes without leakage. In order to cooperate with the decoration, the pressure test can be carried out in sections.
5. The fire hydrant system pipeline can be continuously flushed after pressure test. During flushing, the water flow in the pipeline should meet the design requirements, and the water quality at the inlet and outlet is consistent.
6. The installation of box fittings shall be carried out before the completion of the project. The fire hose should be folded on the hanger, rolled and tightly placed in the box; The fire water gun should be placed vertically in the box, and the self-rescue water gun and hose should be placed on the elevator or at the bottom of the box. The connection between fire hose, water gun and quick connector is generally bound twice with 14# lead wire, with at least two turns each time. When using the clip, add a lead wire inside. When there is an electrical control button, attention should be paid to cooperate with the electrical specialty in construction.