2. Secondly, the edges of the floor are generally fixed with glass glue. Before coating the glass glue, clean up the dust in the gap, then put the glass glue into the gap and the edge strip, put the edge strip into the gap, and press it with a heavy object for about 24 hours. The edge strip of the floor has buckles, which are fixed on the wall and glued.
3. Finally, the installation project can be started. After the floor is laid, there should be a gap of 8- 12 mm around the floor, wall and doorpost, so as to reserve space for the expansion of the floor, and the gap should be covered by installing the baseboard. Joints between floors and doorposts, floor tiles, etc. It needs to be covered with layering or wrapping.
Extended data:
Edge sealing method of circular floor;
Generally, it is made of solid wood battens of the same color, and the thickness depends on the degree of bending. Usually, solid wood battens with a thickness of 15mm can be installed, and the outer edge can be square or semicircular. When installing, it needs to be coated with white latex and fixed with air gun nails. You can paint the varnish several times after completion.
Floor shops in the decoration market generally sell it, which is a decorative buckle made of resin. You should choose a button called right angle for your round edge. There are many colors to choose from. This button can be heated into the shape you want with a general household hair dryer, but it needs to be blown into the shape you need slowly.
The operation method is as follows: first, fix one end at any end of the circle (it is best to ask one person to hold it by hand to avoid damaging the appearance); Press the buckle on the circular edge of the wardrobe fillet according to the circle, and blow it with a hair dryer, which should not be too close to avoid the surface sticker peeling off; Follow the above steps step by step, and you can blow the buckle into the shape you want to ensure its beauty and practicality.