Refer to the following government regulations:
At present, there are two ways to obtain professional titles: examination and evaluation (without taking the examination). I. Normal application conditions 1. Assistant title: (1) Bachelor degree, engaged in professional and technical work for more than one year. (2) graduated from college and engaged in professional and technical work for more than two years. (3) graduated from technical secondary school and engaged in professional and technical work for more than three years. (4) graduated from high school and engaged in professional and technical work for more than seven years. (5) Persons with junior high school education or below have been engaged in professional and technical work for more than ten years, and at the same time should have rank-level positions. 2. Intermediate title: (1) Graduated from university, engaged in professional and technical work for more than five years, and served as an assistant for more than four years. (2) graduated from a college, engaged in professional and technical work for more than six years and served as an assistant for more than four years. (3) graduated from secondary school (high school), engaged in professional and technical work for more than ten years, and served as an assistant for more than four years. (4) Persons with junior high school education or below must be engaged in professional and technical work for more than fifteen years and hold assistant positions for more than four years. 3. Senior title: (1) Graduated from a university, engaged in professional work for more than ten years, and held intermediate positions for more than five years. (2) graduated from college, engaged in professional and technical work for more than fifteen years, and served as an intermediate position for more than five years. (3) graduated from secondary school or high school, engaged in professional and technical work for more than 2 years, and served as an intermediate position for more than five years. Those who meet the above-mentioned declaration conditions must also abide by the law, have good professional ethics, be able to conscientiously perform their duties, make remarkable achievements in their professional posts, and have the corresponding professional theoretical level and practical work ability. II. List of application materials 1. Evaluation Form for Professional and Technical Positions (in duplicate for junior and junior students) and attachment form (in duplicate); The main work performance column in the positive form should be filled in in detail and specifically. 2 last year's "professional and technical personnel assessment registration form". 3. Professional papers and business work summary. Requirements for professional papers: (1) It must be written in person and not copied. (2) to combine my work and post reality. (3) The number of words shall not be less than 3,. Business work summary requirements: (1) Write your own work experience clearly. (2) Write clearly the main projects that you are responsible for or participate in. (3) Write clearly the published papers or the major achievements and awards. (4) the number of words is not less than 15 words. 4. Submit the original graduation certificate and junior professional title certificate. 5 "Professional and technical personnel level ability test certificate"; 6. Other relevant materials that can reflect my work ability and important performance. 7. Six one-inch color photos, two copies of ID card and diploma. Anyone who fails to prepare relevant materials according to the above requirements will not be accepted. Third, Related professional categories: construction engineering: civil engineering, civil engineering, landscape engineering, construction management, construction decoration, architectural design, municipal survey, safety engineering, architectural budget, water supply and drainage, architectural art design, corrosion and protection, water heating, heat energy, hydropower installation, railway bridge cost engineering and other professional economic categories: accounting, economic statistics and other professional mechanical and electrical categories: mechanical and electrical boilers, equipment installation, water conservancy and electricity. Electricity, electronics and other majors Article 1 In order to give full play to the enthusiasm and creativity of engineering and technical personnel, promote the rational exchange of talents, and encourage them to make contributions in promoting technological progress, revitalizing the economy and realizing the four modernizations, these regulations are formulated in accordance with the Report on Reforming the Evaluation of Professional Titles and Implementing the Appointment System for Professional and Technical Posts forwarded by the Central Committee of CPC and the State Council and the Provisions on Implementing the Appointment System for Professional and Technical Posts issued by the State Council. Article 2 Engineering and technical posts (hereinafter referred to as technical posts) are technical posts for engineering and technical personnel in production and construction, survey and design, scientific research, technology development and technology management. Article 3 The titles of engineering technical posts are defined as: technician, assistant engineer, engineer and senior engineer. Article 4 The main basis for hiring or appointing technical posts is that engineers and technicians who hold technical posts must have the practical working ability to perform corresponding duties and the corresponding professional knowledge and technical level. And should have the corresponding science and engineering education and technical work qualifications. Basic requirements for holding a post Article 5 Engineering and technical personnel who hold technical posts must support the leadership of the China Production Party, love the motherland and actively serve the socialist modernization drive. Article 6 To be a technician, one should meet the following requirements: 1. Have the practical ability to complete general technical auxiliary work. 2. Initially master the basic theoretical knowledge and professional technical knowledge of this major. 3. Graduated from a junior college or a secondary specialized school, and passed the one-year internship in an engineering and technical post. Article 7 To be an assistant engineer, one should meet the following requirements: 1. Have the practical ability to complete general technical work. 2. Be able to use the basic theoretical knowledge and professional technical knowledge of this major. 3. Obtain a master's degree or a second bachelor's degree and pass the inspection; Obtained a bachelor's degree or a bachelor's degree, and passed the one-year internship in engineering and technical posts; Graduated from college, engaged in technician work for more than two years, graduated from secondary specialized school, engaged in technician work for more than four years. Article 8 To be an engineer, one should meet the following requirements: 1. Meet the requirements of one of the following departments (1) The production and technical management departments have basically mastered the methods of modern production management and technical management, and have the ability to solve complex technical problems independently. (2) to be able to flexibly use the basic theoretical knowledge and professional technical knowledge of this major, and be familiar with the current situation and development trend of this major at home and abroad. ③ Have some practical experience in production and technical management. Obtain technical achievements and technical and economic benefits with practical value. (4) can guide the assistant engineer's work and study. (2) The research and design department ① has the ability to independently undertake the research and design work of complex projects, and can solve the complex technical problems within the professional scope. (2) master the basic theoretical knowledge and professional technical knowledge of this major systematically, and be familiar with the present situation and development trend of this major at home and abroad. (3) have some practical experience in engineering technology research and design, can absorb and adopt advanced technologies at home and abroad, and have made certain achievements in improving the level of research and design and economic benefits. 2. Get a doctorate and pass the examination; Get a master's degree or a second bachelor's degree and work as an assistant engineer for about two years; Obtained a bachelor's degree or a bachelor's degree, worked as an assistant engineer for more than four years, graduated from a college, and worked as an assistant engineer for more than four years.