What kind of screen do you have?
Plane mobile screen window: reasonable price and good sealing performance. The balcony window is about 10 mm thick, so it does not occupy an area for home use. Magnetic screen window: the advantage lies in the price, simple structure and convenient installation. DIY (thickness about 10mm) can be realized without changing the window structure at all. Foldable hidden screen window: it has an organ-like folding shape and a strong artistic sense. The supporting screen window can be half-opened and half-closed when in use, which is convenient to use. (thickness is about 20-25mm). Removable and washable hidden screen window: good light transmission and beautiful installation. Windproof buckle design, good windproof sealing performance and long service life. The more humanized design is the built-in automatic cleaning system, which is detachable and easy to use, and does not need to be disassembled in four seasons.
How to install the screen window?
1, the first is to prepare materials; 1 screen: polyester gauze; 2 clamp: fix the height of screen window; 4 triangles: used to fix the outer frame and pvc link; 4 strips: each strip contains the corresponding length (adhesive-backed magnetic strip, card slot magnetic strip and pvc plastic strip).
2. Then make preparations. First, determine the window frame size and cut off the excess pvc. After determining the size, insert the pvc strip into the triangle to make a frame. Put the yarn box on it, there are two air slots on the left and right sides under the yarn box, and the bottom is placed below to form a square frame. Then use six screws, two at the contact between the yarn box and the two air slots, four at the contact between the two air slots and the bottom, and two at one side. These two screws are one on the bottom and one on the side. After fixing this box with these six screws, you can proceed to the next step.
3. Next is the installation work. Lay the gauze flat on the finished frame, and press the gauze into pvc strips with slotted magnetic strips. It is suggested to tilt the slotted magnetic strip and push the gauze into the inside of pvc strip. Press the outside again. Cut off the extra gauze outside the frame along the frame to keep the overall beauty of the screen window. The adhesive-backed magnetic strip is adsorbed on the card slot magnetic strip, and a second clip is installed at a position about 30% from the top of the frame. The protective film of the adhesive-backed magnetic strip is pulled out at the position where the clip is installed and installed in the clip.
4. Several points for attention? Window frames must be clean and kept dry. First, tear off the protective film of the upper adhesive magnet. After fixing the position, gradually tear off the adhesive protective film on the left, right and lower ends and the clip, and press the adhesive magnetic strip hard. Install strings on the lower two triangles to open and close the screen window, so that the invisible screen window can be installed, and it is very convenient to take it off directly when not in use.
Now science and technology are progressing rapidly, which can be fully reflected on small screen windows. With the emergence of new materials, there are many styles and types of screens. The above introduces several main screen window styles, but in fact, it is not clear which styles of screens are available at present. Of course, different screens have different installation methods. After reading the above introduction, you can try to install a screen window, but you should also distinguish what style it is.