Question 2: What is the material of the nozzle of the steamer? You mean the brush head of the steamer?
Plastics are prone to aging and deformation, and deformation cannot be used. Plastics are not good at high temperature for a long time.
The fragility of ceramics is broken.
Stainless steel is the best choice. But at present, some stainless steel with screws is not suitable for purchase, which will scratch clothes.
Choosing a stainless steel brush head without rivets is the best choice. At present, only Huaguang brand owns this patented technology.
Question 3: What is the material of the heating pot of the steamer and how to choose the steamer?
The era of electric irons has passed, but clothes are still ironed. Whether going out for a date or a business trip, proper clothes can add a lot to your score. Therefore, in this fast-paced era, ironing machines have become the first choice for white, housewives and super dads! It only takes a few minutes every day to meet people beautifully.
So, how to choose a steamer? I will give you a good explanation here.
First of all, look at the core of the steamer. The principle of ironing machine is to use high-temperature steam to iron clothes by boiling and evaporating water in a heating pot. So the quality of the heating pot is the key to choose the ironing machine.
There are six kinds of heating pots on the market, and five kinds are more common.
The first type is an all-copper heating pot, which heats up quickly and has large steam, but the cost is relatively high; The service life is about eight years, but the premise is that you must clean and maintain it regularly, otherwise it will soon be covered with slurry, because it is easy to scale, and copper is easy to rust after long-term contact with water.
The second and third are copper plastic and zinc alloy. These two materials are quite cheap, and the cost is very low, but obviously, they are cheap and have no good goods, short service life, slow heat conduction and uneven steam.
The fourth one is made of aluminum, which is similar to the second one and the third one, and the material is cheap. Many manufacturers are willing to use this material, but its life is short, and long-term use is not good for health.
The fifth is aluminum alloy. Aluminum alloy heater is basically formed at one time without cracks, with small thermal efficiency loss, fast heat conduction, uniform steam and longer service life than ordinary ironing machine.
The sixth type is stainless steel. The stainless steel heater is much better than before. It conducts heat quickly, and the steam is large and uniform. The most important thing is no scaling, oxidation resistance and corrosion resistance, and the service life is as high as eight to ten years.
In terms of material and service life, I personally recommend stainless steel heating pot. I believe that most people know and trust stainless steel.
Secondly, it depends on the ironing brush, which is a very important part of the ironing machine. Because the ironing brush directly contacts clothes, it can save time and effort to iron clothes effectively, and 50% depends on the ironing brush. Anyone who has used an iron knows that the head of the iron is triangular, which makes it easier to iron, while most ironing machines are arc-shaped and suitable for hanging ironing. However, some triangular head-shaped ironing brushes can be used for hanging, ironing and ironing, such as Huaguang's 3D ironing brush.
The quality of ironing brush depends on two kinds. The first is to iron the surface of the brush. The market is mostly plastic and metal, and the two are still very fierce. Not much to say, different people have different views! Iron has a history of more than two thousand years, and it seems that all of them are metal. Let me talk about the smoothness of its steam outlet and panel first. The size and number of air outlets affect the size and uniformity of steam quantity. Not the bigger the hole, the better, but the arrangement. There are many things in the market that can be done continuously. In this case, it is better than the size of the hole. The best arrangement is V-shaped, so that the steam is more concentrated. Then look at the smoothness of the ironing brush board, because if the details are not connected well, it is easy to scratch clothes, so it is best to use a screw-free board. A separate ironing brush handle can also control steam and switch, which is also worth a try and more convenient.
Again, about the clothesline and the steam pipe.
Hanging ironing machine, hanging ironing machine is indispensable. Recently, there has been a wave of double-edged swords in the market. Undeniably, the double knife is an improvement on the ironing machine. Compared with the traditional single knife, the double knife is much more stable. However, there are also many problems. For example, most of the parallel bars are relatively large in size, and there is no universal wheel at the bottom, which is inconvenient to move. However, it is tempting for individual brands to iron separately, ten pieces together and one piece of clothes and trousers. Not much else to say, the material of the clothes drying rod is preferably aluminum alloy thick-walled material, which is light, strong and tough, and then it depends on whether the expansion joint on the clothes drying rod is firm. Generally, clothes drying poles are three-section telescopic, and the length is about 0.5m to1.6m. This is the most standard telescopic degree, and individual products will be upgraded to1.7m. When purchasing products, you can ask customer service and buy according to your personal needs.
Then there is the steam pipe. The structure of the steam pipe is related to the steam output and the uniformity of steam output. This happens to many people. When using the steamer, it is found that the steamer always makes a cooing sound, or the nozzle is not ventilated when the steam pipe is bent.
In fact, this has a lot to do with steam pipes. Ships always make a cooing sound. On the one hand, it is related to his work ... >>
Question 4: What material is good for the ironing head of the steam ironing machine? First, ironing clothes with a steamer is the best choice. The research shows that ironing with flat iron is easy to damage the fabric of clothes, especially the high-grade fabric (such as hardness and aging), while the steam ironing machine can easily iron under the dual effects of gravity and high-temperature steam (the temperature is about 98 degrees) and maintain the best wearing shape. Second, the use of steam steamer is fast, convenient, time-saving and labor-saving. Friends and shopkeepers who like to visit fashion shops can personally feel that clothes can be ironed when hung in the room, even without bending over to iron them. Many clothes are made in a flash, and clothes can be displayed in front of customers with the best effect. Third, clean. When ironing, the contact position between steam retort and clothes (the air outlet position of the nozzle) is far away from the steam source, and the dirt generated by the high temperature of the domestic water used will never be sprayed on the clothes as easily as flat iron or steam ironing brush, but the price of steam retort (located at the bottom of the heating furnace of steam retort) is completely stored in the pollution storage room of the heating furnace in the distance. Fourth, the price. Factors promote middle and high-end families to choose steam steamer. The price of steam ironing machine has dropped from several thousand yuan when it was introduced into China from overseas in the last century to several hundred yuan now, which means that the price of a steam ironing machine is equivalent to the price of a flat iron at that time. Therefore, ironing machine has gradually become a luxury for high-end families from an image tool that only high-end brand fashion shops can configure conditionally, and now it has become an essential tool for fashion shops, and has become a household appliance for middle and high-end families to replace flat irons and enjoy high-quality life. Although modern families are not fashion shops, their pursuit of clothing image is getting higher and higher, but the high-tempo work and life forces people to hate time-consuming and laborious work, so steam steamer has become an ideal helper for middle and high-end families when various factors and conditions permit. Maier brand ironing machine products are suitable for ironing and disinfection of clothes, curtains and carpets of any material, with simple use, convenient operation, energy saving and time saving.