The advanced electronic program design of Sumitomo 39 fusion splicer allows you to choose automatic splicing and automatic heating reinforcement, making splicing faster and easier. Type-39 is a fully automatic, easy-to-operate, high-performance, low splicing loss optical fiber fusion splicer. The excellent design allows it to be connected to any optical fiber: single-mode, multi-mode, dispersion-shifted and various special optical fibers. This fusion splicer uses high-precision fiber core direct vision method to align optical fibers to achieve the best splicing effect with extremely low splicing loss. Complying with EU RoHS environmental protection standards, the dual heater device greatly improves work efficiency. 5.6” large-screen color display..
The new world standard for fiber core direct-view fusion splicers equipped with dual heaters
● Equipped with a dual heater for the first time in the world. When one fiber is reinforced, the other can be reinforced at the same time (patent pending)
● Equipped with an independent fiber optic heater. Windproof clamp. Usually, the windproof clamp is linked with the windproof cover to achieve quick setting. When necessary, open the windproof cover and leave the clamp to adjust the left and right optical fibers separately.
● The strong indicator mark can confirm the progress of heating reinforcement.
● Just cover the windproof cover and the fusion will start automatically. Just place the fiber on the heater and the reinforcement will start automatically. (Patent application
● One charge can be used for 100 times. Reinforcement has achieved power-saving design (twice that of our company’s previous ones). If a large-capacity battery is used, it can be used for 200 times.
● High-speed connection mode can achieve high-speed connection in about 9 seconds.
High-efficiency heater can complete the reinforcement operation in about 35 seconds. 1? 2) of the time required by our company in the past
● Complies with RoHS directive
Model TYPE-39
Applicable to optical fiber SMF, MMF, DSF, NZ -DSF
Fibre core adjustment, outer diameter adjustment
Standard wiring loss SMF…………0.02dB
MMF………… 0.01dB
DSF…………0.04dB
NZ-DSF…………0.04dB
Up to 48 wiring conditions
Up to 20 conditions for reinforcement
Display Large 5.6-inch TFT color display
(With front and rear position switching function)
Size 150 (W) × 150 (D) ×150 (H) mm
Weight 2.8kg (including AC adapter)