Engineering design fee refers to the fee charged by the designer for providing services such as preparing preliminary design documents, construction drawing design documents, non-standard equipment design documents, construction drawing budget documents and as-built drawing documents for the construction project.
The engineering design fee is calculated according to the quota charging method for the estimated investment of a single project of a construction project. The calculation method of railway engineering design fee is stipulated in the chapter of traffic engineering.
The engineering design fee is calculated according to the following formula
1 engineering design fee = benchmark price of engineering design fee X (1 floating range value)
2 benchmark price of engineering design fee = basic design fee+other design fees
3 Basic design fee = base price of engineering design fee x professional adjustment coefficient x_ engineering complexity adjustment coefficient x additional adjustment coefficient.
Benchmark price of engineering design charge
The benchmark price of engineering design fee is the benchmark price amount of engineering design fee calculated according to this charging standard. The employer and the designer shall, according to the actual situation, negotiate and determine the contract amount of the engineering design fee within the specified floating range.
Basic design fee
Foundation design fee refers to the fees collected in engineering design for preparing preliminary design documents and construction drawing design documents, providing design technical disclosure, solving design technical problems during construction, participating in test run assessment, completion acceptance and other services.
Other design fees
Other design fees refer to fees charged for providing related services according to the actual needs of engineering design or the requirements of the Employer, including overall design fees, main design coordination fees, standard design and reuse design fees, non-standard equipment design document preparation fees, construction drawing budget preparation fees, as-built drawing preparation fees, etc.
Base price of engineering design cost
The basic price of engineering design fee is the price of completing basic services. For the base price of engineering design fees, see the base price table of engineering design fees (attachment 1). If the charging amount is within two numerical ranges, the base price of engineering design charging is determined by linear interpolation method.
Engineering design fees and charges
The amount of engineering design fee is the sum of construction and installation engineering fee, equipment and tools purchase fee and joint debugging fee in the approved preliminary design budget of construction project.
If the original equipment is used in the project, the current price of similar equipment at the time of signing the project design contract shall be taken as the charging amount of the project design fee; If there is delayed equipment in the project, but the existing equipment is used for engineering design according to the contract requirements, and the equipment installation and process conditions are met, the current price of the existing equipment will be used as the charging amount of the engineering design fee; If there are imported equipment in the project, it will be converted into RMB according to the FOB price of the purchased equipment as the billing amount of the engineering design fee.
Adjustment coefficient of engineering design fee
The adjustment coefficient of engineering design fee includes: professional adjustment coefficient, engineering complexity adjustment coefficient and additional adjustment coefficient.
1 Professional adjustment coefficient is the coefficient to adjust the complexity of engineering design and the difference of workload of different professional construction projects. When calculating the engineering design fee, the professional adjustment coefficient is shown in the Table of Professional Adjustment Coefficient of Engineering Design Fee (Annex II);
The adjustment coefficient of engineering complexity is a coefficient to adjust the engineering design complexity and workload difference of different construction projects in the same major. The complexity of the project is divided into three levels: general, complex and complex, and the adjustment coefficient is: general (level 1) 0.85; More complex (level 2)1.0; Complex (level 3) 1. 15. When calculating the engineering design fee, the engineering complexity should be found and determined in the engineering complexity table in the corresponding chapter. '
3. Additional adjustment coefficient is a supplementary adjustment coefficient for factors that cannot be adjusted by professional adjustment coefficient and engineering complexity adjustment coefficient. Additional adjustment factors are listed in the general rules and relevant chapters respectively. If the additional adjustment factor is 2 or more, it cannot be multiplied by the additional adjustment factor. Add all the additional adjustment coefficients, subtract the number of additional adjustment coefficients, and add the fixed value 1 as the additional adjustment coefficient value.
The design fee of non-standard equipment is calculated according to the following formula
Non-standard equipment design fee = non-standard equipment billing amount x non-standard equipment design fee
The charging amount of non-standard equipment is the preliminary design estimate of non-standard equipment. For the design rate of non-standard equipment, see the Design Rate Table of Non-standard Equipment (Annex III).
If the process design, civil and public engineering design, preliminary design and construction drawing design are entrusted respectively, the engineering design fee shall be calculated according to the proportion of the basic service design workload.
For reconstruction, expansion and technical transformation projects, the additional adjustment coefficient is 1. 1- 1.4. According to the complexity of engineering design, determine the appropriate additional adjustment coefficient and calculate the engineering design fee.
Before the preliminary design, if it is necessary to prepare the overall design according to the provisions of technical standards or the requirements of the employer, the overall design fee shall be charged at 5% of the basic design fee of the construction project.
If the engineering design of a construction project is undertaken by more than two designers, the designer responsible for the rationality and completeness of the engineering design of the construction project will charge the main design coordination fee at 5% of the basic design fee of the construction project.
If the engineering design adopts standard design or reuse design, the charge shall be calculated at 30% of the basic design fee of similar new projects; If the basic design needs to be redesigned, the charge shall be calculated according to 40% of the basic design fee of similar new projects; If it is necessary to modify the original design locally, the employer and the designer shall negotiate to determine the engineering design fee according to the design workload.
For the preparation of the project construction drawing budget, the construction drawing budget preparation fee shall be charged at 10% of the basic design fee of the construction project; For the preparation of the project completion drawing, the preparation fee of the completion drawing shall be charged at 8% of the basic design fee of the construction project.
Where the designer's own patent or proprietary technology is adopted in the engineering design, the cost of the patent and proprietary technology shall be determined by the employer and the designer through consultation.
If the introduction of technology in engineering design requires the cooperation of domestic designers, or domestic designers need to design according to foreign design procedures and technical quality requirements, the engineering design fee shall be determined by the employer and the designer through consultation according to the actual design workload and with reference to this standard.
If the design documents provided by overseas designers need to be reviewed and signed by domestic designers according to national standards and specifications, the review and confirmation fee shall be determined through consultation according to the principle of international reciprocity or actual workload.
The standard number of design documents provided by the designer is 10 for preliminary design and overall design, and 8 for construction drawing design, non-standard equipment design, construction drawing budget and as-built drawing. If the Employer requests to increase the number of copies of the design documents, the Employer shall pay the cost of printing the design documents separately. If it is necessary to purchase standard design drawings in engineering design, the employer shall pay the purchase fee.
This charging standard does not include other service charges except 1.0. 1 in the General Conditions. Other service charges, if the state has provisions on charges, shall be implemented in accordance with the provisions; If there is no national fee regulation, it shall be determined by the employer and the designer through consultation.
For more exclusive information about the construction industry, please pay attention to the micro-signal of the construction network in real time.
For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.