Rotating wheel dehumidification is a scientific dehumidification technology developed in modern times. The working principle is as shown in the figure: the dehumidifying wheel is divided into the treatment area and the regeneration area by the sealing system inside the dehumidifying section, and the dehumidifying wheel rotates slowly at the speed of 6-20 rpm, ensuring that the whole dehumidification is a continuous process. When the treatment air passes through the treatment zone of the rotating wheel, the water in it is absorbed by the moisture-absorbing medium in the rotating wheel, and the water molecules change phase at the same time, releasing latent heat, and the rotating wheel gradually becomes saturated because of absorbing some water; At this time, the treated air becomes dry and hot due to its own moisture reduction and latent heat release. At the same time, in the regeneration zone, another air first passes through the regeneration heater, then becomes high-temperature air, and after moisture absorption, it passes through the saturated wheel, so that the moisture absorbed in the wheel evaporates, thus restoring the moisture absorption capacity of the wheel; After that, the wet air is exhausted to the outside through the regeneration fan.
Schematic diagram of EK wheel dehumidification work
According to different humidity control requirements, the moisture absorption material of the runner of EK air conditioner dehumidifier can be high-efficiency silica gel, molecular sieve, or the composite material of silica gel and molecular sieve.