1. What is a floor heating pipe cleaning machine?
The floor heating cleaning machine is also called a geothermal cleaning machine and is mainly used to clean geothermal pipes. The fully automatic pulse geothermal cleaning machine uses a combination of air, water, and electromagnetic pulses to convert the internal vortex power into kinetic energy, which can move at high speed in the form of tiny molecules through the thermal energy, kinetic energy, and electromagnetic pulses during operation. Decompose the dirt in the pipe wall and rush out of the pipe along with the water molecules to achieve the effect of cleaning the floor heating.
2. Working principle of floor heating pipe cleaning machine
Input the compressed air and water provided by the air compressor into the fully automatic pulse generator, and the fully automatic pulse controller controls the pulse generator , according to the cleaning needs, it emits physical pulse waves of different frequencies and wavelengths. The computer-integrated circuit board intelligently matches the reference data and reflects it to various instruments on the machine panel, and performs high-pressure water jet and airflow impact on the inner wall of the cleaning pipeline. The vibration of the waves peels off the rust on the inner wall of the pipe and the deposits in the pipe layer by layer, and is quickly discharged out of the pipe with the water flow through the end of the pipe. It works repeatedly until the cleaning purpose is achieved.
Internet said
3. Technical advantages of floor heating pipe cleaning machine
1. The appearance design has obtained a national patent; the practical and fashionable design concept has become the most popular floor heating pipe cleaning machine in China. Dominate the machine.
2. There is no need to untie the pipe, just connect the connecting pipe to the water distributor to perform cleaning work.
3. No agents or chemicals are used, there is no corrosion on the inner wall of the pipeline and system components, and the discharge will not cause pollution to the surrounding environment.
4. No clogging, suitable for cleaning various complex pipeline systems.
5. Small and lightweight, easy to operate and quick to clean.
6. The cleaning and inspection method is simple, through observation. You can observe the cleaning and sewage discharge effect, and you can also compare the tube removal before and after cleaning.
7. This equipment can not only clean geothermal pipes, but also clean radiators, heat sinks, household water pipes, household water heaters and pressurize geothermal pipe systems.
IV. Structure of the floor heating pipe cleaning machine
1. The gas and water fully automatic pulse generator is the main component that generates high-pressure gas pulses. It combines gas and water to create a complete Under the control of the automatic pulse controller, high-pressure water jets and airflow are formed for cleaning work
2. Fully automatic intelligent pulse controller, fully automatic intelligent control pulse generator, emit physical energy of different frequencies and wavelengths according to cleaning needs Smart pulse wave. The fully automatic intelligent pulse controller has been initially debugged when this machine leaves the factory, and generally does not require further debugging by the user. Just make slight changes according to the blockage of the pipeline. Due to the addition of this high-tech product, the cleaning process is simple and easy to operate.
3. The air compressor generates high-pressure air of 0.8Mpa to provide sufficient air power for cleaning.
4. Connect the pipe, connect the cleaning machine and the geothermal water distributor assembly, connect the cleaning machine and the water source, connect the cleaning machine and the air compressor, and connect the return water from the water distributor to the sewage discharge point.
V. Cleaning procedures of floor heating pipe cleaning machine
(1) Connection
1. Close the water supply and return water separation main valve of the water distributor;
2. Connect the pulse introduction pipe, and connect the digital computer pulse generator to the water main plug end of the water distributor;
3. Connect the water delivery pipe, and connect the water source to the computer pulse Generator connection;
4. Connect the gas pipe, and connect the air compressor to the computer pulse generator;
5. Connect the sewage pipe, and connect one end to the water distributor return water main bearing Plug the end and insert one end into the floor drain.
(2) Starting and cleaning
1. Connect the power supply of the air compressor and digital computer pulse generator, press the power switch on the pulse generator, and start the compressor to work Reach the rated pressure 8Mpa;
2. Open the compressor gas transmission switch and the system water supply valve;
3. Open a separation valve on the water distributor, close the other separation valves, and wash Clean one root at a time;
4. After the backwater is seen at the sewage discharge end, the operation controller controls the digital computer pulse generator to emit physical pulse waves into the geothermal pipeline to start cleaning. According to the length, installation time and scaling status of the geothermal pipe, the pulse cleaning frequency can be adjusted until it is clean.
5. Untie the four connecting pipes respectively;
6. Open the water supply and return water separation main valve of the water distributor;
7. The water separator returns to its pre-wash state.
Note: All connection parts must be tightened to prevent leakage. When connecting, be sure to insert the tube to the end, and when disassembling, be sure to press the snap ring to the end.