The advanced deeds of advanced workers who carry forward the craftsman spirit in 2020
Many people think that craftsmen are mechanical and repetitive workers. In fact, craftsmen have a more profound meaning. Not all craftsmen can become entrepreneurs, but most successful entrepreneurs have this craftsmanship spirit. I have shared with you two stories about the spirit of craftsman, welcome to read!
Inheriting the spirit of craftsman and bravely being a pioneer in skills
Guo Li, female, member of the Communist Party of China, general assembly of the Equipment Manufacturing Department A radio assembly technician in the workshop, he has been engaged in front-line work since he started working. After 13 years of hard work, Comrade Guo Li has become the technical backbone of the equipment manufacturing department. She is dedicated to her job, does not care about personal gains and losses, and has a strong enterprising spirit and sense of responsibility.
Exquisite skills, good results
Comrade Guo Li is one of the few highly skilled surface mount technology personnel in the northwest of CLP. Especially for the welding and rework of high-precision chips such as QFP, QFN, BGA, etc., we are unique. At the same time, the electrical installation skills are comprehensive and the manual skills are superb. He is a leader in electronic assembly such as board level, module, combination, cabinet, antenna base and so on.
As one of the young backbones of "Master Yang Ping Studio", Comrade Guo Li has accumulated a lot of experience and participated in the QC results release of China Electronics Northwest for three consecutive years and won the second prize, third prize and excellence award respectively; two Won the first and third prizes in the China Electronics Northwest Production Cup Skills Competition for the first time; participated in the 2019 China Skills Competition and the China Electronics Technology Vocational Skills Competition, and stood out among the top players of the group company and won the 9th place. Excellent results, and won the honorary titles of China Electronics Technology Technology Expert and China Electronics Technology Youth Job Expert.
Work hard and take the initiative to take on urgent, dangerous and heavy tasks
Comrade Guo Li worked a total of 556 hours of overtime throughout the year, equivalent to 70 working days, ranking among the best in terms of working hours. Her team has many tasks and needs to work overtime all year round. When the workshop encounters urgent, difficult and dangerous tasks, she takes the lead and takes the initiative to find ways to complete them. Especially in September 2019, in order to ensure product delivery in the fourth quarter, CLP Northwest took the initiative to give up weekends and holidays, working overtime until 9 o'clock almost every night, and completed more than 1,000 printed board modules throughout the year. 60-piece combination, 10-piece cabinet and other assembly work.
Faced with difficulties such as a serious shortage of assembly cycles for an airborne trailer and a shortage of personnel, Comrade Guo Li had the courage to "take the lead". The entire assembly required 5 connectors and 1 connector to be installed in a 21CM*8CM*7CM rectangular body. The ground plate, 1 printed board, and 132 wires required extremely high personnel skills. She took the lead in formulating a detailed plan, calculated the outlet lengths of the 5 wires with special requirements, and shielded them in advance to make the operation simple and convenient. In the end, Complete tasks on time.
Dare to take responsibility and devote yourself to work
As a mother of two children, Comrade Guo Li always puts work first. Whenever work requires her, she will rush to work as soon as possible.
During the epidemic, the delivery time of certain projects in Northwest China was tight. She took the initiative to report to the workshop: My family and I did not go out during the holidays, did not take public transportation, and did not go to crowded places. , had no contact with outsiders, was in good physical condition, and could wait for orders!? On February 6, she took on the emergency maintenance task and became the first employee of the equipment manufacturing department to invest in scientific research and production, leading four other employees After working overtime for more than 10 days, we successfully completed 20 sets of up-converters, 10 sets of power wiring units, and 10 sets of up-converters and internal printed circuit board clamps for a certain product, ensuring that the emergency task was completed on schedule.
Diligent thinking and overcoming technical difficulties
The first assembly task of a pre-scientific research product array antenna undertaken by Comrade Guo Li required welding SMP*3.2 on 512 high-frequency connection holes. mm high-frequency connector, it is required to use a steel needle to dip a small amount of solder paste and apply it evenly on the boss surface of the connector within 360 degrees, and insert it into the welding hole accurately. It is necessary to ensure that the center of the connector is not offset or short-circuited. It is also difficult to shorten the entire processing time as much as possible.
In the face of difficulties, Comrade Guo Li was diligent in thinking, made her own tooling, and used her skilled operating techniques to complete one connector every 20 seconds on average. She completed the installation and reflow soldering of the entire antenna connector within four hours. According to measurements All qualified, no short circuit.
During the first welding of a certain product, multiple chips were found to have poor welding. The main reason is that the gold-plated material of the domestic chip lead legs easily produces gold particles during welding, resulting in virtual soldering. However, there is currently no special gold removal equipment, Guo said. Comrade Li was not afraid of difficulties and meticulously removed gold by hand. By controlling the operating techniques, time, and angles, the expected results were achieved. This was recognized by the process and inspection personnel, and the product quality was also guaranteed.
Good at summarizing and actively playing the role of mentoring and mentoring
In daily work, Comrade Guo Li always maintains the habit of organizing work notes. By summarizing, sorting out and sorting out work notes, It is these seemingly inconspicuous bits and pieces that make her radiate light and heat about the operational difficulties at work. With her simple work style, solid theoretical foundation, persistent professionalism, and scientific working methods, she has made great achievements in ordinary tasks. They work silently on their posts, contribute silently in ordinary work, and use their work performance to interpret the extraordinary work after work.
While she continues to improve herself, she also helps the young employees around her improve their skills. He personally demonstrates, learns and communicates, and imparts his award-winning experience and skills to young employees without reservation. He has led 7 apprentices and has done a good job of teaching and mentoring.
A hard work, a reward. Over the years, Comrade Guo Li has been fighting on the front line of production, down-to-earth, continuing to inherit the spirit of craftsmanship, and bravely being a pioneer in skills. Carry forward the spirit of craftsman and pursue excellence
Diligence, hard work, seriousness and perseverance are synonymous with him. He is Liu Gang, deputy director of the production technology department of the dry method factory of Jinli Group.
In 2000, he was transferred from the No. 4 Jinni Plant to the Project Department of the Dry Process Plant to carry out installation and construction work. Follow the company's key personnel to go to the West Yunnan Cement Plant to learn the new dry process cement technology. After studying carefully, I will cooperate with Su'an Company in the installation work. It can be said that he will follow up on the installation and operation of the dry process plant equipment. During the test run, he was assigned to work at the exhaust gas position in the raw material burning workshop for one year. Due to work needs, he was transferred to the warehouse for storage. At that time, he was the only one who kept the warehouse. There were no holidays and he was always on call no matter where he was when collecting materials. When the amount of maintenance is large and the demand for spare parts is high, in order to ensure the timely supply of spare parts during maintenance, he lives directly in the factory to ensure the smooth completion of the maintenance task. In 2007, he was transferred from warehouse custodian to technician of dry method factory, engaged in equipment management. In order to strengthen his business capabilities, he learned about the performance and structure of new dry process cement equipment from the Internet and textbooks, went to the site to conduct more detailed inspection and management of the equipment, actively communicated with the staff and technicians, and understood the entire plant. equipment. In 2010, he was promoted to deputy director of the Production Technology Department due to his outstanding business capabilities, and was fully responsible for the equipment work of the dry method factory.
I still remember that when I first entered the factory, the technicians explained the cement production process to us. They said that the heart of our factory is the kiln system. One can imagine the importance of the kiln system to the cement factory. However, the grate coolers at that time had many faults and poor cooling effects, and "red river" situations often occurred. The occurrence of "Red River" will not only reduce the service life of the grate cooler, but also burn out the conveyor belt under the clinker warehouse, causing the kiln system to shut down more than twice every month due to grate cooler failure, which not only becomes a safety constraint It is a bottleneck for normal production, and maintenance costs are also very high. As the deputy director of the production technology department in charge of equipment management, he shouldered the responsibility of renovating the grate cooler. He carefully reviewed the information, actively communicated with the design institute and some engineering units, and carried out demonstration and transformation of the grate cooler. He regarded the factory as his home. The lights in his office were on at midnight every day, and his desk was filled with thick documents and design drawings. The hard work paid off. Due to the solid preliminary work and sufficient demonstration, the grate cooler renovation project was a success. The clinker temperature has dropped from 230 degrees before the transformation to about 100 degrees now, which can save about 1 million yuan in maintenance costs every year. The failure rate of the grate cooler has dropped significantly, completely eliminating the impact of the grate cooler on the kiln system. Later, Minister Liu discovered that the grate cooler fan group was very noisy and would cause occupational hazards to workers. He applied for the purchase of 11 fan mufflers to control the noise.
As the national environmental protection standards become higher and higher, our factory faces increasing pressure on environmental protection. The first test is the dust control at the kiln head and kiln end. After many investigations, he came up with a plan to change the large cloth bag at the kiln head from the internal filter type to the current external filter type, and transform the electric precipitator at the end of the kiln into the current electric bag combined dust collector, which greatly reduced the dust. emission. The dust emission concentration has been reduced from 100mg/m3 before the transformation to less than 20mg/m3 now, which is far lower than the national standard. At the same time, the country has stipulated new energy consumption standards for the cement industry, and the energy saving and consumption reduction situation of our factory is particularly severe. He communicated with other technicians in the cement industry by reading information, and used advanced equipment to control the energy consumption of the entire plant. All large high-voltage fan motors in the factory are controlled by high-voltage variable frequency control from liquid resistance cabinets. The 1250kw motors for cement mills, 1400kw motors for raw meal mills, and 1000kw motors for ore powder mills are all equipped with cameras. These energy-saving measures for the equipment save 15% of electricity. More than about %, which has significantly reduced the energy consumption of our factory and controlled the comprehensive power consumption of our factory below 93Kwh.
He pursues refined management of equipment, and goes to the site and relevant technical personnel to carefully diagnose the equipment in use, and promptly handles equipment defects found. He will focus on the research and innovation of equipment at all times, learn professional knowledge with an open mind, and conduct timely technological innovations based on actual conditions to solve bottlenecks that restrict production. Technical transformation projects such as the transformation of the cement grinding and screening compartment device, the technical transformation of the rotary kiln hydraulic gear cylinder, the technical transformation of the O-Sepa powder selector and the poor loading of the mixed material warehouse have solved the existing equipment defects and improved the efficiency of the equipment. Equipment operation rate and operating hours are reduced, which reduces maintenance costs and employee labor intensity. After sorting out the innovative projects and applying for patents, four national utility model patents have been passed, and many of the technological innovation projects have won provincial and municipal technological innovation awards.
The most common thing Liu Gang said at the weekly safety production meeting was: Do a good job in lubrication and maintenance of the equipment, and frequently inspect the equipment areas of the assigned positions to eliminate equipment failures in the bud. Ensure equipment operation rate?. Although the inspection tasks have been assigned to each workshop position, he has to carefully inspect the entire plant's equipment every day before he feels reassured. He treats every day's work with a solid work style and rigorous work attitude. His attitude towards work is worth learning from every one of us. It is precisely because of his dedication to his work and hard work that he can keep the equipment operation rate at a high level all year round and protect the normal production of the dry method factory.
?