First, the panel material of gas stove
Generally speaking, there are two kinds of panels for choosing gas stoves, one is tempered glass and the other is stainless steel. The choice of these two materials makes everyone very entangled, so let's talk about the difference between the two materials.
First of all, the tempered glass gas stove is of course very fashionable from the aesthetic point of view. There are many colors to choose from, the matching kitchen style is quite versatile, and the tempered glass countertop is also very clean. When cooking, it is inevitable that there will be oil stains around. Toughened glass can be cleaned directly with a rag, which is very convenient to clean up in the future. But the only problem, which is also the key problem, is that it may explode and even hurt us, so we should pay special attention to this.
Then the stainless steel panel. First of all, stainless steel panels are very good in high temperature resistance, impact resistance, compression resistance, weight resistance and so on, and there is absolutely no problem of self-explosion and long service life. The disadvantage may be that if it is not cleaned in time after being contaminated with oil, the oil may penetrate into the line, resulting in poor cleaning. Moreover, the cleaning force is too strong, which may leave scratches and affect the appearance.
Therefore, if you are lazy in pursuing beauty, you can choose tempered glass, but you must choose tempered glass with good quality. If you pursue quality and safety, then choose stainless steel, which is also the choice of stainless steel panel recommended by experts, because safety is more important.
Second, the common faults of gas range hoods
Sometimes the gas stove can't catch fire or shut down automatically;
1, there are many reasons why the gas stove can't catch fire. The pulse ignition stove can't catch fire (although there is ignition sound) mostly because the battery is dead. Just replace the battery.
2. Inappropriate ignition needle placement or too far ignition distance will cause the cooker to fail to catch fire. Rotate the inner cover of fireworks to an appropriate angle to ensure that the ignition is aimed at the air outlet on the quasi-ignition cover.
3. Rust or stains on the ignition needle of the gas stove may affect the ignition. Scrape the ignition needle and internal fireworks with metal sheet to expose the metal surface for ignition. In addition, if the ignition needle is damaged due to the breakage of the ignition needle, the problem can be solved by replacing the ignition needle.
After the gas stove is ignited, the flame goes out after a period of time;
1. Check to make sure the battery in the gas cooker is low. Replace the battery. The switch knob is not pressed in place. Press the switch knob in place.
2. Then check the throttle adjustment size of the gas stove. The air door ensures that the air intake of the air door is within a suitable range.
There are also some cookers with flameout protection devices. If the flameout protection needle (next to the ignition needle) is too far away from the flame, it will cut off the gas source. Adjust the position of the inner pyrotechnic cover to solve the problem.
4. Once again, the electromagnetic valve in the gas stove is damaged, the pulse is damaged, and the flameout protection needle is stained with oil. Clean the flameout protection needle, replace the solenoid valve and replace the pulse.
Natural gas combustion produces red or yellow flames instead of normal blue, which may also make the bottom of the pot black:
1, the fire is red or yellow, which is mainly caused by insufficient combustion or insufficient gas. First, check whether the air inlet is supplying gas normally, and then manually adjust the throttle of the gas stove to change the oxygen intake until the flame turns blue.
2. In addition, the shape of the fire cover of the gas stove is deformed, there is dirt on the fire cover, or the position of the fire cover is incorrect. Clean and confirm that the fire cover is clean and installed in place, or replace it with a new one.
The phenomenon that the flame of lengthening or lengthening the fire cover is small and does not catch fire;
1, mostly because the fire hole and nozzle of the fire cover are blocked by oil and impurities. Fine needles and toothpicks can be used for communication, and the nozzle is blocked and needs to be cleaned or replaced.
2, solenoid valve and other parts also need to pay attention to check, clean up impurities and dirt or replace the new solenoid valve of the same model.
It can be seen that the related faults that need to be paid attention to in the use of gas stoves need to be solved by analyzing the reasons. For example, there are many reasons why the gas stove can't catch fire, and the pulse ignition stove can't catch fire (although there is ignition sound) mostly because the battery is dead. Just replace the battery.