Principle of household heating heat exchanger
If the heat exchanger is connected in series to the heating pipe, the high-temperature hot water and tap water in the radiator (which must not be mixed) will exchange heat inside the equipment without affecting the heating. Tap water absorbs the heat in the hot water of the radiator, and the water temperature quickly becomes higher. Use the heat of radiator to heat tap water into domestic water at 30℃-65℃.
Application of domestic heating heat exchanger
The heat exchanger is mainly suitable for family bathing and washing clothes in winter, which makes family heating and bathing more perfect; Kitchen washing dishes, no electricity and no gas water heater, energy saving and environmental protection; It can also be used in companies, hotels, schools and other public places.
Household heating heat exchanger structure
The two ends outside the cylinder body of the heat exchanger are provided with installation ports for hot air and tap water, and tap water is filled in the cylinder body, and the hot air and hot water heat the tap water in the cylinder body through the coils in the cylinder body; There are two water dividing devices at both ends inside, which can make tap water slowly injected into the heat exchanger barrel, so that cold and hot water can be evenly separated, and at the same time, hot water can be pushed out of the barrel to achieve the use effect.
Both inside and outside the heat exchanger are made of high-quality food-grade stainless steel, which has passed the water pressure test of 1.2MPa before leaving the factory. It is corrosion-resistant, pollution-free, safe, reliable and durable.
Heat exchangers have various models and complete varieties. There are instant, horizontal and circular; There are also barrel type, box type and combined type. Can also be customized according to the special requirements of customers.
Characteristics of household heating heat exchanger
1. No gas, no electricity, zero cost consumption. As long as you have a radiator at home, you can use the heat of the radiator to heat the water into domestic hot water at 30℃~65℃ to meet all aspects of your daily life;
2. Small size, exquisite appearance, high heat conversion efficiency, the difference between tap water outlet temperature and water temperature in radiator is only about 5℃, and the effect is very good;
3. It can be used as a heat engine, and the water temperature is constant and continuous to meet daily needs;
4. Made of food-grade stainless steel, it never rusts, has strong corrosion resistance, and is safe, secure and stable;
5. Patented vortex channel design, no scaling, zero resistance, and special filter screen to prevent blockage.
Price of household heating heat exchanger
1, Li guob3-012 plate heat exchanger reference price: 100.
2. Reference price of Baode BL26-20D brazed plate heat exchanger: ￥580.
3. Reference price of national strength B3-0 14 plate heat exchanger: ￥280.
4. Baode BB60-30H detachable plate heat exchanger reference price: 4,000 yuan.
Matters needing attention
1. A filter must be installed at the heat source water inlet of the heat exchanger to prevent the heat exchanger from being blocked.
2. During installation, ensure that hot water and cold water enter the heat exchanger in opposite directions.
3. When it is not used for a long time, the accumulated water in the heat exchanger should be discharged to prevent freezing at low temperature or corrosion at high temperature.
4. If the heat exchange efficiency of the heat exchanger decreases, it should be cleaned and descaled in time.