aluminum cleaning agent is a colorless to transparent liquid, which is compounded with high-efficiency surfactants, builders, corrosion inhibitors and other additives. When used, it is diluted with 5-1% water. This cleaning agent has strong washing ability for various oil stains such as mineral oil, animal and vegetable oil, etc.
1. Product performance and use
1. It is suitable for degreasing and cleaning of aluminum, aluminum alloy and other materials. After cleaning, it is as bright as new, keeping the original brightness of metal materials.
2. This product is an alkaline cleaning agent, which can quickly remove oil stains on metal surfaces.
3. This cleaning agent can replace gasoline, kerosene and organic solvents, saving petroleum resources, and there is no harm to human body caused by the toxicity of organic solvents.
4. The cleaning solution prepared with this degreasing agent is uniform and transparent, without suspension, precipitation and hard water resistance.
5. Small dosage, complete dissolution, long service life, no residue, easy rinsing and no corrosion to the substrate.
Second, technical indicators:
Project quality indicators
Externally colorless to transparent liquid
Use concentration of 5-1%
Treatment temperature of 6-7℃
Treatment methods: soaking, ultrasonic, spraying, Wipe
treatment time is 5 ~ 8 minutes
PH value is 11. ~ 12. (prepared and used medicine is 9. ~ nearly neutral)
density is 1.26
III. Usage of the product
1. When using this product, read the product instruction manual carefully and use it under the guidance of professionals. Cleaning methods can be ultrasonic, spraying, hot soaking, manual wiping, etc.
2. When using, the concentration of cleaning solution should be adjusted according to the severity of oil pollution. Generally, the original solution is prepared into a cleaning solution with a concentration of 5% ~ 1%, and the cleaning ability can be improved by increasing the concentration. When cleaning by hand, the concentration of cleaning agent is relatively high. 1% ~ 3% cleaning agent should be added regularly every day, and new liquid should be replaced every 2 ~ 3 days.
3. Cleaning at 6 ~ 7℃ has the best effect.
IV. Precautions
1. Adjust the concentration of cleaning solution according to the severity of oil pollution, and rinse the cleaned workpiece.
2. Remove the floating oil on the surface of the bath in time to avoid secondary pollution.
3. Do not make this product contact with eyes. If it accidentally spills into eyes, lift the eyelids and rinse them with flowing water or normal saline.
4. To prevent excessive degreasing of the skin, please wear chemical-resistant gloves when operating.
v. packaging and storage
1. packaging: 5kg/ plastic bucket.
2. storage: sealed and stored in a cool, dry and ventilated place with a shelf life of 2 years.