Connecting the serial port equipment to the Ethernet MOXA NPORT 5232 serial port equipment networking server can make the industrial serial port equipment connect to the network immediately. MOXA NPORT 5232 series serial device networking server is small in size, which is the best choice for connecting RS-232 or RS-422/485 serial devices, such as PLC, measuring instruments and sensors, to the Ethernet LAN based on IP, so that your software can store any serial device on the local LAN or network.
The standard TCP/IP interface and MOXA NPORT 5232 series serial port networking servers with various operating modes provide TCP servers, TCP clients and UDP, which can ensure compatibility with network software using standard network API(Winsock, BSD Sockets).
The real COM/TTY driver that supports the existing software has a real COM/TTY driver, and the software used for COM/TTY ports can now be used at any time in TCP/IP networks. This feature not only saves you from changing the software, but also allows serial devices to connect to the network immediately.
Just install and set up the NPort 5200 series serial device network server to support the automatic IP configuration protocol (DHCP, BootP), and set it manually through the Web browser console. Both of them provide a quick and effective installation method. Using the Windows utility of NPort 5200, the installation is simple and pleasant, and all system settings can be stored and copied to other networked servers.
trait
-Serial devices can connect to the network immediately. -TCP server is provided. Socket operation modes such as TCP client and UDP-can be installed in batches by using simple Windows utilities-bulky cigarette case-self-hole detection10100 Mbps Ethernet -2-wire or 4-wire RS-485 data stream automatic control (ADDC)- all ports are built with 15 KV ESD surge protection-support SNMP MIB-II network management.
LAN Ethernet: 10/ 100 Mbps, RJ45 protection: embedded 1.5 KV electromagnetic isolation protection serial port NPort 52 10/52 10-T serial port number: 2 (RS-232) serial port type. DCD, GND gnd signal protection: all ports provide15kV ESD nport5230gnd RS-485 (4 wires): Tx+, Tx-, Rx+, GND signal protection: all ports provide 15 KV ESD RS-485 data flow direction: patented automatic control function of data flow direction (ADDC N Port 5232/5232 I/5232-t/5253 I-t Number of ports: 2 (1 RS-232, 1 port RS-422/485) Port type: terminal NPort 5232I provides 2 KV photoelectric isolation RS-485 data flow direction: patent. 0.5 KV surge protection, EN6 1000-4-5 embedded function embedded buzzer embedded real-time clock embedded watchdog timer serial communication parameter check bits: none, even, odd, blank, flag data bits: 5, 6, 7, 8 Stop bits: 1, 1.5, 2 Flow control: XOFF rate: 1 10 bps ~ 230.4 kbps Software function protocol Linux real port TTY driver, SCO Unix, Sco openserver 5, unixware 7, unixware 2. 1.x, SVR 4.2 Configuration: Web browser/ Telnet console, Windows tool or serial console port (NPort 52 10/5230) Power requirements: power input: 12~30 VDC Power consumption: 52 10: 305ma @ 12v (maximum) 5230: 30. 5232:259.6 mA @ 12v (max. ) 5232i: 509.4ma @ 12v (max. Mechanical performance material: aluminum (1 mm) Total weight: 52 10: 0. 138. 5230: 0.140kg (0.31lb) 5232: 0.119kg (0.26lb) 5232i: 0.157kg (0.35lb , 5 ~ 95% RH -40 ~ 75C (-40 ~ 167F), wide temperature model storage temperature: -20 ~ 85C (-4 ~ 185F), 5 ~ 95% RH has passed the certification EMC: CE: en55022/en552. 5 Subpart B A safety certification: UL: UL 60950-1Tdi: EN60950-1Medical application certification: EN 6060 1-655.