In terms of AI technology, MediaTek Dimensity 1000 is also at the global leading level! ?Dimensity 1000 has many world firsts.
On the afternoon of November 26, 2019, Dimensity 1000 is the new 5G chip released by MediaTek at the MediaTek 5G conference in Shenzhen. Dimensity 1000 is the world's first 5G chip that supports 5G dual-mode and dual-carrier aggregation. It uses a 7nm process technology. The CPU adopts a 4 large core + 4 small core architecture. The GPU uses a 9-core ARM Mali-G77 GPU for the first time. Equipped with a new APU architecture. ?
In terms of 5G, Dimensity 1000 is officially called the world’s fastest 5G single chip. It is the world’s first 5G chip to support 5G dual-mode and dual-carrier aggregation. It has the highest throughput rate in the world. It has a downlink speed of 4.7Gbps, an uplink speed of 2.5Gbps, and a 30% increase in 5G signal coverage. In addition, Dimensity 1000 is also the first 5G chip to support 5G+5G dual card dual standby and supports Sub-6GHz band SA independent networking. Connect with NSA non-standalone network and cellular networks of all generations from 2G to 5G.
?One core is in trouble, nine cores are watching? I wonder if any of you have heard of these eight words? This is probably why for those who are familiar with chips, when mentioning MediaTek, these eight words will come up immediately. MediaTek also stated earlier that cooperation with multiple mobile phone manufacturers for the Dimensity 1000 series and 800 series is progressing smoothly, and mobile phones equipped with these two series will be available in the first half of 2020. Saying that no manufacturer has cooperated with Dimensity 1000 developed by MediaTek and equipped with Dimensity 1000 is indeed too absolute. It is impossible that no manufacturer will not carry Dimensity 1000 developed by MediaTek.
MediaTek also stated earlier that the cooperation between Dimensity 1000 series and 800 series with multiple mobile phone manufacturers is progressing smoothly, and mobile phones equipped with these two series will be available in the first half of 2020.
So, why do manufacturers no longer cooperate with MediaTek?
I think the main reasons are high prices and insufficient production capacity. Therefore, for manufacturers, equipping MediaTek’s Dimensity 1000 may be a risky step. As for the Dimensity 1000, we can only say that there is not enough market sampling to prove its performance and performance. Therefore, for manufacturers, no matter who takes the first step, it is a bit risky.
Mobile phone manufacturers are relatively controlled by Qualcomm. If they choose to cooperate with MediaTek, Qualcomm will be dissatisfied. If Dimensity 1000 has problems at this time, then Qualcomm Group may also cooperate with it because of these problems. manufacturers suddenly turned their heads to research and development departments and no longer provided Qualcomm chips to these manufacturers.
My personal knowledge of technology and digital is indeed very lacking, but from my personal point of view: the main reason is that MediaTek’s chips only have chip technology, while Qualcomm not only has chips but also has a bunch of patent licenses, etc. Technical support is available, so Qualcomm's chips can be used to make mobile phones with confidence and boldness. There is no need to worry about complicated patent authorizations. MediaTek's chips are weaker and related patent authorizations must be considered.